Doors "Profile Dors" - entrance and internal

The choice of the front door is a very important task. After all, it carries not only an aesthetic function, but also carefully keeps all your values. In a variety of door salons and supermarkets, the consumer is offered an unimaginable choice of front doors. They are made of different materials, have significant differences in design and exterior finish. Therefore, when finally comes time to put an end to the long search and determine the manufacturer and model, the final decision is given with great difficulty.

Criterias of choice

Each entrance door must necessarily meet the following characteristics:

• Reliability: the construction of the door leaf and the frame, as well as the quality of the door hardware, must guarantee protection against burglary.
• High sound insulation: the door must reliably store the secrets of the tenants of the house or apartment.
• Quality thermal insulation: the door should keep the heat of the interior, this is especially important if it leads directly to the open street space.
• The design of the door should provide for the possibility of inspection of the adjacent territory.
• The front door is the first thing that guests see, so it should be beautiful and fit the overall interior design.

Only with full compliance with all these characteristics, the door will be bought and popular, and grateful owners will not be left to leave a positive response to the manufacturer.

Responsible manufacturer

It can be said with certainty that all the above-mentioned significant characteristics are fully met by the entrance doors "Profile Dors". This factory began its work in 2002 with the production of components for door and furniture production. Two years later, the first entrance doors "Profile Dors" saw the light.

Since then more than 10 years have passed. All this time, the company's specialists worked on the development of the enterprise, improving the products. Great help in this difficult matter was provided by close cooperation with colleagues from Italy and Germany, which occurred during the installation and adjustment of new equipment, as well as in the selection of new European materials.

Doors and doors again

At the moment the factory makes not only the entrance doors. Production successfully mastered several lines of high-quality interior doors. This is very convenient for potential buyers of the factory's products, since they have the opportunity to decorate all the doorways of their house in the same style.

Details about the entrance doors "Profile Dors"

Customer feedback invariably calls the company the best manufacturer of entrance doors on the Russian market. What is so pleased with the company's customers? What are they, the front doors of the "Profile Dors"?

Let's start with boring technical information, which is still necessary for understanding the reliability and practicality of products:

• All entrance doors "Profile Dors" are solid, with stiffeners to increase strength;
• Thickness of metal - 1,5 mm;
• Profile thickness - 2 mm;
• The fitting places of the fittings are reinforced with additional metal plates;
• Attempts to penetrate the building are prevented by anti-detachable crossbars;
• The internal filling of the entrance doors is made with basalt slabs.

Beauty and harmony

As for the aesthetic characteristics, then the designers and designers of the factory have implemented a very relevant idea: any front door can be equipped with an overlaid panel that completely repeats the design of any interior door produced by the factory. Thanks to this, the entrance doors of the "Profile Dors" in the interior are not at all out of the general ensemble of internal joinery.

Ideal for interior decoration

Company Profile Dors produces four lines of interior doors:

• Series X - collet door leafs of collapsible construction with polypropylene coating. Their main advantages are the strength and ability to repair or replace any part of the structure.
• Series Z - frame doors made of solid pine and MDF with various types of internal filling. Their highlight is the aluminum edge that frames the ends of door leaves and gives the product greater strength and durability.
• Series D - frame doors with a unique veneer coating produced in Germany. All products of this line are delivered in the maximum configuration, with the factory insert and the installation of first-class fittings of European manufacturers.
• The VG series, or high gloss, is a unique series of doors made in the best European design traditions. These doors feature a smooth, scratch-resistant surface, capable of reflecting objects on a par with the mirror.

This is just a general summary. All the beauty and perfection of the products can be appreciated only after seeing the interior doors "Profile Dors" personally. Photo of the model line in the catalog, unfortunately, will give only a distant view of the quality of the door leaf.

Where can I buy

The factory successfully sells its products all over Russia. Its own offices are located in Moscow, Novosibirsk, Samara and Tatarstan. In other regions, the extensive dealer network implements the Doors Profile doors. Feedback on the work of the partners of the company is invariably positive.

In the neighboring countries - Belarus and Kazakhstan - you can also buy Doors Profile doors. Minsk is represented by the company "Yurkas". A representative office of the manufacturer was opened in Almaty.

In conclusion, I would like to emphasize once again that Profile Dors is a reliable, experienced manufacturing enterprise whose capabilities have been checked by time.