Decorative plaster "Bayramiks": characteristics, application, photos and reviews

Plaster "Bayramiks" is a decorative composite marble coating based on acrylic copolymers and aqueous emulsion, as well as granite-marble chips. The material can be used for finishing the outer finish, as well as for interior work.

It is universality that makes this plaster so popular with consumers. It is chosen by customers for a variety of reasons, among them there is a high degree of resistance to abrasion, so the surface after drying can be subjected to wet cleaning.

Why choose "Bayramiks"?

Decorative coating after drying is perfectly cleaned, which means it is ideal for finishing small architectural forms and facades. Among the first can be identified fences and parapets. Quite often this mixture is used as a decorative material for interior decoration of premises. These can be public buildings, namely:

• Halls;
• Restaurants;
• Corridors;
• Halls;
• Toilets;
• Kitchen.

As the main advantage of the composition is the possibility of applying it to almost any surface, such as:

• Drywall;
• Reinforced concrete panels;
• Walls of light or cellular concrete;
• Panels from fiberboard, plywood, particle board and wood;
• Walls with well-preserved enamel, water-based paint or acrylic composition.

Positive reviews

Plaster "Bayramiks" has many positive features, among which consumers distinguish:

• durability;
• A variety of color and textural solutions;
• Ecological purity;
• Resistance to treatment with a solution of chloramine.

Additional advantages are excellent mechanical strength. It is important to note also a sufficiently high level of manufacturability, which is expressed in good adhesion, as well as in low losses during application. Plaster "Bayramiks" is quite resistant to the effects of high humidity, alkalis, ultraviolet and temperature fluctuations.

According to consumers, the composition is quite easy to apply, and there is no need to conduct tedious preparatory work. In view of the fact that the mixture after drying is resistant to treatment with a 10 per cent solution of chloramine, this plaster can be used for wall finishing in medical institutions.

Specifications

Plaster "Bayramiks" is light-resistant to ultraviolet, and also fireproof. The polymerization time can last for 24 hours. This period sometimes stretches to 48 hours. Durability is estimated by the manufacturer as 25 years. The strength of adhesion to the concrete surface is 15 MPa.

The temperature of use varies from -50 to +80 ° C. Plaster "Bayramiks", the consumption of which is 3 kg / m ² , does not contain harmful substances. It is resistant to detergents, and the size of the crumb can vary from 700 to 1400 microns. In addition to technical characteristics, you may be interested in the fact that the application should be carried out with a spatula and a steel float.

Surface preparation

Like any other finishing material, the plaster described requires the application on the prepared substrate. It should be dry, clean, smooth and without pronounced defects, among them, cracks and chips should be distinguished. The solution should be applied evenly, so it is important to worry about the base being uniform in composition.

Decorative plaster "Bayramiks", photo of which is presented in the article, can be applied to the metal base. Before that, it must be cleaned of corrosion, if any, and covered with alkyd or epoxy. In the process of preparing a surface on which there is an old paint of unknown chemical composition, one should use a putty material with linseed oil. In order to subsequently eliminate the appearance of color spots, the surface is treated with a solution of copper sulfate, as well as alkyd composition, PF-115 can make it. This mixture will serve as an isolate.

Features of preparation

"Bayramiks" - plaster, the reviews you could read above, should be applied to a pre-ground surface. After the layer has dried, proceed to the plastering works. The primer will give the surface uniformity and reduce the risk of stains on the plaster wall.

It is important to consider some limitations before starting work. For example, the moisture level of the surface should not be above 10%. The minimum temperature should be +5 ° C, while the maximum temperature should not exceed +30 ° C. Do not start the plastering work in wet rainy weather.

Preparation of tools and materials

Mineral plaster "Bayramiks" can be applied after preparation of a set of tools and materials, among them:

• Stainless steel construction float;
• Metal trowel;
• Perforator;
• Painting tape;
• capacity;
• Flat paint brush;
• ladder;
• electrical extension cord;
• Cotton protective gloves.

When preparing a paint brush, you should prefer the one that has a long handle. The puncher can be replaced with an electric drill, which is supplemented with a mixer nozzle. You should also take care of the presence of a soffit with a tripod. In addition, you should have a plastic film. To prepare the solution should be stocked with a large capacity, its volume should be approximately 25 liters.

Preparation of the solution

Before you apply the decorative plaster "Bayramiks", you must prepare the composition. The contents of the package with the mixture should be placed in a container adding about 1.5 liters of water. The mixture is well mixed. For this purpose it is best to use a drill with a nozzle. When the tool is set to low speed, the solution should be stirred for 15 minutes or more. The resulting mixture should be stored in a closed container.

Technology of work

If as a decoration you chose decorative plaster "Bayramiks", then its application should be carried out on a previously prepared surface. All work, which is accompanied by the formation of dust, must be completed. In order to achieve a good result, the work should be carried out in sufficient lighting. In order to avoid accidents, the rules for the handling of electrical appliances must be observed. They must be turned off from the sockets. Only after the plaster has dried, the appliances can be turned on.

The plaster is applied by a metal construction float. The master should make translational movements, directing the instrument from the bottom up. Composition in the right amount is superimposed on the surface of the float with the help of a construction trowel. The application of the mixture on the surface should be carried out on an even layer, its thickness should not be impressive and depends on the fraction of the mixture. Decorative plaster "Bayramiks", as practice shows, is consumed in the volume of 3.5-4 kg / m ² . This applies to large factions. If we are talking about a composition with an average fraction of elements, then the consumption will be reduced to 1.8-2 kg / m ² .

Grout, or rather, adjustment, should be carried out not earlier than half an hour after the application of the main layer. "Bayramiks" - plaster, the photo of which is presented in the article, should be applied at a certain temperature. For the polymerization of the layer, +5 ° C will suffice. Under such conditions, the drying time will last from 24 hours to 48 hours.

Recommendations of the master

Sometimes after applying the plaster on the surface, color spots appear. The main reason for this phenomenon is the failure to observe a uniform thickness of the layer. Removing stains can be repeated by applying another layer of material. The second layer is applied after the base coat dries.

After the application of the plaster "Bayramiks" was carried out, you may notice that yellow spots appeared on the wall. This indicates the effect of the base components on the material during the polymerization step. In order to avoid this phenomenon, it is necessary to thoroughly prepare the surface. If the application is planned to be carried out on the facade of the building, it is rational to check the reliability of storm and engineering drainage systems. In order for the surface to be perfect, it is necessary to apply to it one layer of plaster.

How to avoid mistakes

«Байрамикс» не слишком сложна, одним из наиболее ответственных этапов работы выступает подготовка поверхности. The technology of plastering Bayramiks is not too complicated, surface preparation is one of the most important stages of work. The final result will depend on how well these works were performed. Application is carried out on a flat surface, which does not have too obvious defects. After the walls are leveled, they can be covered with a primer, for this it is recommended to use a mixture of "ASTAR". However, the composition is previously painted in the same color as the "Bayramiks".

The plaster described is already finished material for finishing, which does not require the need for preparation. The only thing you have to do is to dilute Bayramiks in a certain volume of water, so that the deposition is more convenient. The volume of fluid will depend on the fluidity of the plaster, but it usually does not exceed 1 liter per 20 kg of the finished mixture.

The plaster is leveled using a metal spatula. The application should be accompanied by a check of the smoothness of the thickness of the layer, it should not be more than 1.5 crumbs. Once the plaster is applied to the wall, it should be left for half an hour to dry. The drying time can be changed to a smaller or larger side and depends not only on the temperature, but also on the humidity of the air.

As soon as the layer dries up, you can begin to re-smooth the surface. Do this with an exceptionally clean tool to avoid damaging the applied plaster. After the final drying of the surface, it should be covered with a protective layer of varnish. For this, the composition BS-18, whose total drying time is 12 hours, is perfectly suitable.

Conclusion

Plaster of the brand "Bayramiks" is made using an astringent, which is not cement or gypsum, but a polymer binder. This acrylic is a fairly strong artificial resin. It is environmentally friendly, and it is possible to use the mixture with its addition for external and internal works.

Marble plaster is filled with crumbs of different shapes, sizes and colors. Having become acquainted with the assortment of described plaster mixtures, you can understand that the company produces a line of marble plasters, among them you can find compounds with ball granulate of marble, as well as mixtures based on materials that mimic the color and texture of sandstone.

Marble plaster can be used in almost all conditions, here are the surfaces that are constantly subjected to intensive abrasion during operation. They can be washed and wiped with a solution of bleach. If we compare these plasters with gypsum compositions, the former differ in higher strength and reliability.