Crocheted dress for doll: patterns, types and recommendations

Mothers of daughters sometimes come to the time when you need to crochet a dress for a doll. How to be in this situation? After all, the product should be very small. With the thickness of the yarn and the size of the hook, everything is clear, they should be as thin as possible. But what about the scheme? What kind of model to choose to knit was simple and at the same dresses dolls, crocheted, looked not worse than purchased?

Leaf

To reduce the description of how the work is done, the following notations are introduced:

• In order to crochet a dress for a Barbie doll you will need to type a chain of 27 loops. In the first row, you need to associate stbN in each loop, except the first one. If the toy is bigger, then you need to take into account that this chain should be the size of its waist with the allowance for the buttons.
• From the second to the fourth row, the work goes the same: an air loop (it forms a lift that will be repeated in all other rows), stbN at each vertex of the previous row. In the fifth it is necessary to add one bar. This addition must come to the very last loop of the series.
• Sixth: a column of BN, two stbN in one vertex (hereinafter "addition"), 3 stbN, one addition, then 3 stbN, again adding, continue the row of 3 stbN and adding, complete the row with 7 BN columns.
• Seventh: 8 column BN, addition, continue 13 stbN, again adding, 8 stbN.
• The eighth row consists only of columns of BN.
• Ninth row: 8 stbN, addition, followed by 15 stbN, one more addition and 8 stbN. Tenth: stbN at each vertex of the previous row.
• Eleventh: 8 column BN, addition, tie 17 stbN, one more addition, then 8 stbN. The twelfth row is tied in the same way as the tenth.
• The thirteenth: stbN, continue with addition and 13 stbN, do not bind one loop (hereinafter "decrease"), 10 stbN, decrease, stbN, again decrease, 10 stbN, again decrease, 13 stbN, make one addition.
• The fourteenth row of the dress bodice for the doll: 15 BN column and one decrease, 9 stbN, again decrease, stbN, one more decrease, 9 stbN, decrease, complete with 15th stbN.
• Fifteenth: 14 stbN, decrease, bind 9 stbN, one decrease, 9 stbN, once again reduce, and then another 14 BN columns.
• Sixteenth row: 7 pillars BN, 12 air, to pass 6 loops, 20 stbN, 12 air, to pass 6 loops, 7 columns BN.
• Seventeenth: 7 SS, 12 stbN in the arch of the air loops, 20 SS, again 12 stbN in the arch, 7 SS. Fasten the thread. On the vertical of the bodice, sew three buttons.

A knitted dress for a doll (crochet) is usually made tight, so the bodice will almost always be the same. But the other elements will have significant differences. For example, the sleeve can be made short or long, wide or narrow. In the described description the flashlight sleeve is shown.

Sleeve

The whole product will not be stitched, the elements are supposed to be tied to those that are already available. Continue to crochet a dress for a doll like this: put the bodice on the wrong side to yourself.

• The first row: on the bases of 12 columns, fastened on an arch of air loops, to connect: stbN, 2 half-columns of SN, 6 stbN, 2 half poles of SN, column BN. The sleeve will go only on the top of the doll's hand, that is, between the body and the hand it will not be.
• Second row: 5 air, from the first loop connect two times st2CH and air loop, in the next 10-st2SN and air, then again in one loop perform st2SN and air two times.
• Third: the lifting loop, the BN column in each arched row of the previous row. Repeat the work for the second sleeve.

If you want to tie a long sleeve, you need to repeat the first row several times. And then in the end to connect the pattern, which was specified for the second row of the short sleeve. If you do not want to sew details, then you need to knit in a circle.

Collar

You can leave the dress for the doll without it. But with a collar it will look more effective and elegant. So, to tie a collar to a dress (crochet) for a Barbie doll, you need to type a chain of 70 loops, the first of which will be used for lifting.

In the first row, 69 pillars of BN should be connected. The second must be connected by the same elements and in the same amount after one lifting loop. Only to grasp the back half-loops of the tops of the previous row. In the same way, we need to link 9 more rows.

In the eleventh row, after one air loop, connect 29 BN columns, repeat four times: two stbNs with one vertex and stbN, then another 28 stbN. The last row will play the role of strapping. It begins with the column of BN, then to the end of the series it is necessary to repeat this pattern: 3 air, decrease and BN column.

For fastening, it is convenient to use a hook that must be sewn to the ends of the penultimate row.

The fourth (largest) detail of the dress for the doll: skirt

This element of clothing can also vary. It can be large and wide or narrow and short. And someone will want to make the skirt of the dress long and narrowed. Each time will be a new special dress for the doll (crochet). The outline of a wide skirt is shown below. First you need to put the bodice of the dress face-to-face and waist up. Then the work is supposed to be performed according to the plan indicated below. And it is necessary to take into account that in each row or circle it is necessary to make 4 loops for lifting.

• 1 row: two st2SN in one loop (hereinafter "expansion") in the 24 bases of the bodily columns and one more st2CH to the last vertex.
• 2 series: ст2СН, extension - should be alternated to the end of the series, which should be completed by one ст2СН.
• 3 row: it is similar to the second, only the addition must be done every two st2SN.
• 4 row: now the addition is supposed to be performed every three st2SN.
• Gradually increase the number of columns between the additions to the ninth row. In it the distance between the additions should be 7 st2SN. And with the fifth row of knitting should go in a circle.
• 10 circle repeats the ninth.
• 11 circle of a dress skirt for a doll: 8 ст2СН and one addition it is necessary to alternate to the end of a number, to complete it one ст2СН.
• 12 circle is supposed to knit just like the eighth. The same will be 14, 16, 18-22.
• 13 circle: st2SN in the loop of the base of lifting, 10 st2CH and addition must be alternated to the end of the row, 10 st2SN.
• In the 14th circle, dresses for a doll to knit 15 st2SN with one addition, then repeat these elements until the end of the circle, until there are 7 loops remaining, and execute st2SN in them.
• 17 circle consists only of st2SN, which knit behind the back walls of the loops.

Such a hem is supposed to be worn with a skeleton. It can be made from dense cardboard rings, connected by thick threads. It should be ensured that the frame is not visible from under the hem. This skirt can already be left in this form, but the girls want to make jewelry, so that the dress for the doll becomes elegant. For these purposes, you can use thin satin ribbons, gathered in bows. The decoration can be a lace, crocheted, or roses.

Dressing on the hem

To crochet a dress for a Barbie doll looked solemn, a simple scheme of lace hem will come in handy. For its production, it is necessary to put the dress face-to-face and hem to the top. Then find the circle where the 16th row ended. His front half-loops were left untouched. They will be laced with a lace ruffle.

• The first circle: 4 air, in each 4th loop connect the SS and st2SN.
• In the second one, in each arch, connect the SS, and between them 7 air loops. To ensure that the lace is not too taut, it is required to make additional arches out of 7 air loops every two ordinary ones. That is, in the next arch to link not one SS, but two at a time.
• From 3 to 9 circle: knit the same chain of 7 air loops and SS at each apex of arches.
• 10th circle: 2 air, in the first arch - st2SN and air, in the next - stbN, air and seven times to repeat st2SN, alternating with air, this alternation of works in these arches should be repeated until the end of the circle.
• 11th circle frills the hem of the dress: on all the air loops tie in stb, which should alternate with one air loop.

The upper edge of the frill is also recommended to be tied. To do this, connect each of the base arches of 4 air loops with stbN, 3 stSN and one more stbN.

Dress Decoration: Rose

It is not enough just to know how to tie a dress for a doll, crochet will have to make and decorating for it. On a chain of 24 loops, bind 6 of them to stbN, then repeat to the end of the row - 3 air and stbN into the second loop. It remains to fix the thread and fold the rose, sewing it from the wrong side.

In a set for a dress for a doll: a hat

On the sliding loop, connect the 6 SS. Then, gradually adding loops, make a circle. Its diameter should be about 3.5 cm. Followed by circles without addition. They will form the crown of the cap. Its fields must again be knit with a large number of SS additions. At the edge of the hat, tie an openwork pattern for a lace ruffle. That the hat looked beautiful, it must be starched.