Configuring D-Link DSL-2640U: Step-by-Step Instruction

The article will describe the modem, or rather, how to configure the D-Link DSL-2640U router. Rostelecom and other providers require almost identical connection parameters. The processes are fairly easy and without any problems are carried out even by those people who work with such equipment for the first time. This device is considered universal, since it works with Ethernet and LAN ports.

General information

What about the quality of the work? Unfortunately, there are many complaints from buyers. One common: when working with the factory firmware of the initial version, the wireless access point does not work. Because of this, you will have to update the software immediately after purchase. This problem is the cause of many other problems - a weak signal, disgusting Wi-Fi, permanent failures and so on. Already in the latest versions of the firmware such problems are rare, the manufacturer was able to eliminate most of the shortcomings. The router is already working stably, without hangs, the signal is excellent, without interference and interruptions.

Next, read the detailed description: how to properly connect the modem to the computer, how to properly configure the D-Link DSL-2640U, how to install a wired Internet and wireless access point.

Equipment

When buying a modem, you need to check whether all the components (bundle) are normal. The box must have a device itself, a splitter (or tee), power and a cable for LAN connections. The latter can be gray, green or blue, depending on which version of the modem is purchased. It is desirable for a more comfortable work to purchase a telephone cable. The connectors should be the same as the splitter. The modem is best installed near the computer, since the LAN cable included does not differ in length.

Wiring plan

After all the preparations for connecting the modem are completed, you need to perform a certain sequence of actions.

It is necessary to disconnect the communication cable from the phone, connect it to the splitter. You need to do this using the Line port. Do not forget about the cord that comes with the kit. This is a cable with the output of Phone. It is necessary to connect it to the phone.

Then you should use the cable you purchased earlier. It needs to be connected to the splitter and modem. After - connect the device to the power source. Next, connect the modem to the computer using a LAN cable.

This is how the connection scheme is created. Next, consider the settings of the software.

Log in to the control panel

After figuring out how to create a connection diagram and connect the modem to the computer, you need to go to setting up the device itself.

First, you need to reboot the router, having previously reset its parameters to the factory ones. Only then can you configure the D-Link DSL-2640U. How to do it? You need to find the Reset button, take any thin device (needle, paper clip, etc.) and click on it. To make it easier to find it, you need to clarify - it is located on the back of the LAN port and the connector for the power cable. The modem must be switched on at all times. As soon as the device reboots, the indicators stop blinking randomly, you can start the setup process.

It is necessary to prepare data that will allow changing the parameters of the router. It's about the username and password of the modem, its IP address. You will also need a browser, in the address bar of which you should enter the last specified data. It should be noted that you can do this only on the computer that is connected by wire to the D-Link DSL-2640U RA modem. The setting should be continued.

In the browser, enter the IP address of the network: 192.168.1.1. It's standard. The user will open the menu, in which it is necessary to enter login and password, then he will have access to the setting.

If all connections and data are correct, then the owner will be able to enter the control panel. There you can immediately see the basic information about the device: network, DSL status and general indicators of the router.

Advice

If the control panel is opened in any foreign language, then you need to pay attention to the upper right corner. There will be a special button responsible for changing the interface. It is a drop - down list in which to search the Russian language. Then setting up the Internet D-Link DSL-2640U will be much easier.

It is best to immediately change the password to access the modem settings. You need to go to the "Advanced Settings", then the "System" menu. There will be a button "Administrator password". Do not forget to click on the "Save" button.

How to set up a connection?

The D-Link DSL-2640U is configured and connected using two methods. The first is WAN, the second is Click'n'Connect. In the article we will describe only the last option. The fact is that it is much easier for those people who configure the Internet and work with the modem for the first time.

Click'n'Connect: configure the modem

This configuration method will take much longer than the debugging option via WAN, however it is much easier and it will be easy in case of what to track where the error occurred. In order to start the process of changing parameters, you need to find the same tab in the control panel.

It should be checked whether there is a link provided by the splitter to the modem. In order to do this, you need to pay attention to the DSL indicator - it should be lit. What if the light does not light up? It is necessary to check the contacts. Is the plug correctly connected to the outlet, the wire to the splitter, the router and the computer. If everything is connected correctly and there are no problems, and the indicator is not lit, then you need to check whether there is electricity. After troubleshooting, when the light comes on, you need to follow.

On the settings page of the D-Link DSL-2640U modem, you will be prompted to select the connection type. To understand what is necessary, you need to use the contract or call the provider's hotline. After selecting the connection, click on "Next".

A window will open in which you will be asked to enter the login and password given by the provider. Next, enter the VCI (40) and VPI (0) indicators. After clicking on the "Next" button you will have to confirm the data. A window will appear that says "Connection setup is incomplete". You need to click OK and check if there is an internet connection. If the test is successful, then the configuration of the D-Link DSL-2640U router is complete. Sometimes it happens that the Internet appears in a few minutes - you need to wait a bit.

The final step: you should save and restart the router. You can do this either with the help of mechanical keys on the device, or in the control panel in the "System" menu.

Work with Wi-Fi

In order to easily work with access points, you need to make certain settings. This modem works with these types of networks, so consider all the manipulations that need to be done.

You need to go to the "Advanced settings", in the Wi-Fi menu. After that, you need to find the "Basic parameters" section, in which you will have to specify all the necessary data.

You should check the Enable Wireless Connection check box. Next, you need to write down the name of the network. You need to do this in a field called SSID. You must specify your country. In the "Channel" you can leave automatic filling.

After the advanced settings of the WiFi router D-Link DSL-2640U you need to go to the "Security" menu to set the password and encryption. The latter is responsible for exchanging information between the computer / phone and the modem. You do not need to select WEP / WPA settings. It is better to prefer WPA2 and beyond. Otherwise, neighbors or other outsiders can easily find the password. Further it needs to be written down in the necessary column. The password should be remembered, as it is required to connect to the access point. Then you need to save the data. If desired, you can reboot the router, as sometimes the network may not immediately appear.

Results

This modem is considered universal. That's why you can use it both in offices and in ordinary living quarters. At the same time, the type of Internet delivered and the use of additional components do not matter. Unfortunately, the model from the manufacturer did not receive any ultra-chic functional. But it can be justified to say that the router is fairly simple to use, and it's also easy and quick to configure the D-Link DSL-2640U. The signal is not lost, does not get off and does not freeze.

Most often, consumers are faced with overheating of the device. But the owners note that this does not affect the functionality and quality of the work. You just need to sometimes give the device a "rest". Many advise this device to buy and use. Its firmware has been improved over time, so enjoying it is a pleasure. Setting up the D-Link DSL-2640U is as fast as possible. Therefore, do not be afraid when making a purchase, this choice will really justify itself. Successful purchase and excellent use!