Concrete mortar unit. Mobile Concrete Plant

A concrete-mortar unit is an installation for making concrete. If you make a comparison with the plant, the difference will be in the configuration. However, with the help of this equipment, it is possible to produce all types of concrete. At the same time, for the operation of certain facilities, there is no need for a person to participate in the process. Some variants of the equipment assume the presence of many recipes.

As a bundle, such devices can be mobile or stationary. The latter variety is considered classical, it is characterized by high productivity and efficiency of work. Usually such installations are used in the conditions of the enterprises which are engaged in continuous works on one place.

Description

Mobile concrete plant allows to produce concrete in medium quantities. Such installations are effective and are usually used by specialists of construction and commercial organizations that work in different or remote locations. Dissolved knots can also be classified according to their characteristics, however, they are similar in function to their function. In this you can be sure, having become acquainted with the comparison of some models.

Different installations have their own technical features. For example, you can consider the model "BRU BRUS-15G", which has as follows:

• Dispenser of cement, liquid additives and water;
• Concrete mixer with control panel;
• Skip hoist;
• conveyor;
• Dispenser;
• Bunker;
• Vibration feeder;
• Grab with control panel.

This unit can operate under automatic or manual control. The operator of a concrete-mortar unit of this type is able to cope with the installation alone or with the help of another person. The equipment can be operated in regions with different climatic conditions, the temperature can drop to -300 ° C.

Technical specifications BSU-10/17

Among the characteristics of the nodes described are:

• performance;
• Installed capacity;
• Number of aggregate fractions;
• Storage capacity of aggregates;
• Capacity of the cement warehouse;
• Capacity for loading and exit;
• Heating system at low temperatures;
• Type of mixer.

Concrete-mortar plant can have a productivity in the range from 15 to 20 m ^{3 /} h, in winter time this figure can be reduced to 10 m ^{3 /} h. The storage capacity of aggregates and cement is 200 m ³ and 40 tons, respectively. If we are talking about capacity for loading and output, then these parameters are 750 and 500, respectively. As a heating system, a steam installation is used. The capacity of the equipment is 40 kW, while the mass is 37,200 kg.

Technical characteristics of the BRUS-15G unit

As an example, you can also consider another BRU. The concrete-mortar unit, which was mentioned above, has a productivity of 15 m ^{3 /} h. The number of aggregate fractions reaches 3 pieces, while the cement warehouse is 24 m ³ . The equipment weighs 12 tons, and its installed capacity is 36 kW.

Characteristics of the UBRS-10 BRU

If you decide to choose a mobile concrete plant, then it is worth considering the model "BRU UBRS-10", whose productivity is 24 m ^{3 /} h. In this equipment, the concrete mixer SB-146A is used, and the dosing device is:

• The gauge of the charge of water;
• Cement dispenser with a sensor and a control controller;
• Dispenser of inert materials with a controller.

Considering the concrete-mortar unit, you should also ask about the capacity of the open-storage aggregate, which is 200 m ³ . With regard to the capacity of the cement warehouse, it reaches 40 m ³ , but the capacity of the chemical supply tank is equivalent to 1.5 m ³ . The water in the supply tank can hold 3.5 m ³ . The dosing system in this installation is electronic-mechanical, but the ratio of mortar and concrete mixes is as follows: 0.65 / 0, 5.

For this equipment, the vapor pressure level is 68.6 kPa, as for the working pressure of the pneumatic actuating system, it can vary from 0.39 to 0.49 MPa. As fuel, gas or diesel oil can be used, and the consumption is 102 g / kg of steam.

Characteristics of mortar solution of FIBO INTERCON M2200 concrete block

If you decide to purchase the article described, it is worth considering a concrete-mortar unit of a foreign manufacturer. The model was mentioned above. It is based on a triaxial trailer with front axle and sectional hoppers for aggregates. As the last can come out rubble or sand.

For its power class, this equipment acts as the most compact unit in the world. Equipment includes:

• Water tank mixer;
• Conveyor pump for the supply of chemical additives;
• High-pressure cleaner with automatic control.

The volume of the mixer can vary from 1500 to 2200 liters, while 500 liters are placed in the water tank. Its additional function is the heating option and the dosage system.

The pump has volumetric dosing, the cleaner works at a pressure of 160 kW. To operate this concrete-mortar unit will be quite simple, because it has automatic control for 25 recipes with the calculation of downloads, time tolerance and dosing control. The moisture content of the sand can be adjusted manually. The download protocol is displayed in the production diary, if necessary, the protocols and invoices are printed. The unloading height is 1120 mm.

Conclusion

Modern mobile concrete plants and concrete-mortar knots are used in production quite often. They allow you to get a large volume of the mixture, which would be difficult to achieve when working manually. Typically, the units have a steel frame that provides convenient transport and has suitable fixings for winter plating. Additional advantages are equipment in the form of tanks, mixers and pumps. Management is automatic, which almost completely eliminates human interference.