Computer accessories: description and advice on choice

The main requirement in the development of the PC was the creation of a block architecture, so that in the event of damage, it was not the entire system that was to be repaired, but the individual elements. A modern computer is designed in this way. On the main elements of the PC and assembly tips, read the article.

Computer accessories

The motherboard is a single element that is responsible for the interaction of all other devices. On it are all the seats (sockets, connectors, slots).

The central processor is a set of control circuits located on the chip. It is the brain of the computer, primarily designed for performing mathematical operations.

Describing the main components of the computer, you can not bypass the memory. RAM - a device that functions as a short-term memory. All the data necessary for programs and OS are stored in it, they are erased when the power is turned off.

A hard disk is a device necessary for long-term data storage.

A video card is an element of a computer that is responsible for displaying and processing graphic information on a monitor.

People who have at least superficially studied the computer market understand that buying a ready-made PC is irrational, since it is much cheaper to assemble the computer from the components itself. In this case, you can be sure of the quality of the assembly.

Recommendations

Very often inexperienced users make gross mistakes, which lead to a waste of money. For example, before buying a motherboard, you need to check what type of processor it can be installed in. With the following tips, inexperienced users should be sure to read.

Make sure that all the computer components that you select are compatible. Read all of the technical information that is available. First, determine which processor is needed in the PC, then select the motherboard. Be sure to check that the socket of the motherboard is suitable for the processor. This is very easy to do by checking the specifications on the official websites of the device manufacturers. Usually, in addition to the component parameters on such resources, you can find whole compatibility tables.

When the processor and motherboard are selected, proceed to selecting the remaining devices. The order of selection of RAM and video card does not matter.

Today, the market presents several generations of memory, and the motherboard usually supports only one type. To determine which characteristics to choose RAM, you need to build on the parameters of the motherboard and processor. First, determine which generation is supported by the system card. Then find out if the processor can provide RAM at maximum frequency. At the last stage, select the required amount of memory. If you choose components for a gaming computer, it is better to install RAM slots with more capacity, since modern 3D applications are very demanding on PC resources.

Before choosing a video card, you need to determine what the PC will be used for. If the assembly is gaming, then the video card should also choose the most productive one.

The power supply is an element that has little effect on performance, but still requires careful selection. The practice of service centers has repeatedly shown that the components of a computer assembled independently, which saved on the power supply, often fail because of the poor quality of this element. You should not save on BP. It is better to purchase a product with more power than necessary. In addition, it is recommended to prefer the devices of famous manufacturers.

How to assemble the computer from the components

After buying all the elements of the PC follows the assembly procedure. At this stage, even inexperienced users rarely experience problems. Usually, the motherboard is accompanied by a detailed instruction containing pictures, by which you can understand exactly how you need to perform the assembly.

It is important to ensure that the processor keys (special slots) match the slots on the motherboard slot. An error at this stage may lead to physical failure of the components.

Elements such as video adapter and RAM require some power to install into slots. But you need to be careful and do not overdo it so as not to over-bump the motherboard too much.

The complexity of building a gaming PC

When assembling a PC for games, the compatibility of the computer components should be viewed from a different angle. In addition to supporting all the necessary standards by the motherboard, it is necessary to solve the problem of maximum performance. And this is impossible without a long study of the forums and comparing the results of tests of different sets of devices installed on one base. A computer for games will require more financial investment than an office machine.