Car wash with own hands: components and fabrication

For a well-bred person a trip on a dirty car is considered a sign of bad taste. You can bring the car in order in two ways: by using the services of a car wash or using several buckets of water and rags. The first option, if used constantly, will lead to high costs, the second - is inconvenient, takes a lot of time. However, a car wash, manufactured by yourself, will greatly simplify and speed up the process.

Of course, there are also industrial equipment equipped with a high-pressure pump, but its cost does not contribute to mass distribution. The conclusion suggests itself: a mini-wash, assembled with its own hands from available materials, is thus an inexpensive solution to the problem. Repeat in artisanal conditions, the industrial design will be unlikely, and its cost will be prohibitive.

Components for self-made car wash

Readers are invited to design a simple device for washing the machine. As a base and a container for water , a polyethylene canister of 10 liters in volume is suitable. The fluid supply to the brush with special channels is made by the pump, which are used in the VAZ-2109 car washer.

The electric motor of this product works from a car battery and connects to a standard cigarette lighter socket. A silicone hose with a diameter of 6 mm, enclosed in a protective tube of a larger size, is used to supply water to the working area of the brush. This car wash with their own hands is literally on the knee, for several hours, and almost always ready for use as intended.

Compact washing

First you need to make improvements to the canister device. The most advantageous location of the pump is at its lower point. In the bottom, drill a hole of the desired diameter and insert the pump into it through a special rubber sleeve. Now we connect the supplying six-millimeter pipeline, previously threaded into the protective hose. It also carries out the control wiring to the pushbutton located on the brush.

A car wash, manufactured by oneself, needs to protect the work units. The casing is cut from another canister, placed on the working container from below and fixed in this position. In the protective case, cut out the hole of the desired diameter, through which the hose and wire will be removed for connection to the on-board network. Field tests showed the high efficiency of the device, allowing to produce a washing machine, without dousing the hands.

Business for washing cars

The offer to take a bucket with a rag or homemade device in order to earn some pocket money is good for a teenager. For a serious business, a room with a water pipe, a sump for used water and all necessary equipment and appliances is necessary. The construction of a car wash by one's own hands must begin with the acquisition of a land plot and the processing of documents.

When building a structure, you need to take care of the heating system. Otherwise, the provision of services to bring the car in the proper form in the winter will be impossible. A modern car wash, built by themselves, will bring a good income to the owner, especially in large cities. After all, most car owners here can not deal with the process of washing the car themselves.