Bad_Pool_Header Error: Causes and Methods of Correction

Despite the fact that the operating systems Windows 7 and 8 are some of the most stable, they can also be fatal crashes. One of the most common situations is a version of the "blue screen of death" (BSOD) with an error message like "0x00000019 Bad_Pool_Header". Let's see what it is and how to solve the problem in the simplest ways.

What is the Bad_Pool_Header error?

Typically, failures of this kind can occur if the system is unable to allocate enough memory (virtual or physical) to run an "iron" or software component.

The reasons for the appearance of a blue screen with failures Bad_Pool_Header (Windows 7 and 8) can be very much. Now we look at the most basic.

Causes of the occurrence of failures and the method of their correction

The most likely cause of the failure is the inconsistency of the "hardware" equipment with the system requirements (the usual incompatibility), including the installed device drivers. At the same time, this also applies to the software part, which uses these drivers for correct operation.

Most often, such situations are observed when using Avast! In the environment of the "seven" and "eight". It is also possible that the newly installed software is also incompatible with the shell of these operating systems. Often the cause of the failures are the NTFS file system errors.

As it is already clear, if a failure in the Bad_Pool_Header system is connected with the hardware, it will have to be replaced or at least tried to reinstall or update the "native" drivers. You can do this from the Control Panel or use the driver disk provided with the device, or with the help of special automatic utilities to reinstall.

Sometimes you may need to test the RAM slats. It is recommended to disconnect the computer, and then insert them one by one and check the correctness of the load each time after inserting the next bar.

Fix Bad_Pool_Header with Disk Checker

So, first you need to check the system disk. However, in order to avoid the Bad_Pool_Header error or fix it, the system needs to be loaded in safe mode (F8 key when Windows starts).

If the download is normal, you can use the command line with the chkdsk shortcut or use the standard disk checker from the menu that is called by the right click on its letter. It is better to set the parameter for automatic error correction. At the end of the service, you will need to reboot again.

Installing the latest system updates

One way to fix Bad_Pool_Header errors is to fully install system updates. This applies to cases when this operation does not use automatic mode (disabled).

In some cases, even with the automatic update involved, they will have to be found manually and then installed. However, this is a standard procedure.

Remove specific software

It may very well be that the above described methods will not help. Here it is necessary to tinker with recently installed programs. As already mentioned, often this problem is associated with anti-viruses like Avast! Or even with a system scan of the Dr.Web utility . Web Cure It!

As you already know, in this situation, you can either install another antivirus software, or use a different system from Dr.Web for testing. Web antivirus.

The same approach is recommended for the removal of some programs (most often games) that can modify the configuration files of the system and use the "operative" or resources of the video card too hard. In the list of installed applications, they must be sorted by the date of installation, and then the sequential deletion until the problem disappears.

System rollback

If such actions do not help, and the system starts to "crash" already at the stage of loading, then you will have to use the installation disk with the subsequent entry to the recovery console.

With its help, by the way, you can not only roll back to the previous state from the control point, but also perform many additional actions such as the same checking of the system partition (chkdsk c: / f / r), the NTFS file system (the chkntfs / xc: ) Or rebuild the loader (components FixMbr, FixBoot, etc.).

Conclusion

However, even if the program methods for fixing the Bad_Pool_Header error do not give a result, then there is only one thing: to search for its cause in the hardware. There are no other options. Everything can happen with the same "RAM", maybe this winchester flew, maybe the video card is not supported by the system.

There can be as many options as possible. In this case, in order not to completely "kill" the computer or laptop, it is better to contact the appropriate service center, otherwise the clock will not work, and the motherboard will burn, and then the material costs will become even greater.

However, in most cases, a normal scan of the system disk with error correction or Windows recovery should have the desired effect. And, of course, do not forget about viruses, antivirus packages that can cause conflicts of this kind.