Artvinil for sex - what is it? Artvin vinyl for floor: price, reviews

In the domestic market of finishing materials, floor coverings are presented in a very wide range. Nevertheless, almost every year there are new, more advanced materials that attract the attention of specialists and ordinary buyers.

Most recently consultants of large construction stores began to offer their customers artvinyl for the floor. What it is? According to the manufacturer (Tarkett), this is a unique material that can be compared to ceramic tiles or parquet according to assembly technology. Various colors and shapes of tiles allow you to create on the floor the design you dreamed about.

Artvinil for sex - what is it?

This is a multi-layer material that consists of:

- Fiberglass, responsible for the safety of dimensional indicators. Tiles from artvinil does not narrow or stretch under the influence of different loads.

- Calendered layers (usually two). They protect the appearance of tiles and ensure the resistance of the material to loads. On the floor of this material there are no traces of heels, furniture.

- The decorative layer creates the appearance of the coating.

- The relief transparent layer creates a relief on the outside of the tiles, emphasizing naturalness. This layer provides greater strength to the material.

- Varnish (brand Extreme Protection), which is the development of the company Tarkett. It has a high level of wear resistance, which is 7 times higher than those of similar materials.

Advantages of the material

Artvinil for the floor has high quality characteristics. It is durable, waterproof and wear-resistant, perfectly tolerates temperature changes. All these indicators are very important when it comes to choosing a floor covering. It is necessary to take into account other parameters.

Artvinil for the floor has a beautiful appearance that mimics natural materials. Designers use it to implement the most daring ideas on the floor. For example, combine in an harmonious composition oak and marble, beech and slate. On this subject there can be a huge number of options. Tiles or laths are collected in different ways - parquet, herringbone, in the form of brickwork and so on. The manufacturer offers its customers 10 styling schemes. They are described in detail in the instruction sheet attached to the material.

It is quite natural that buyers are interested in how the styling is done. Artvinil for the floor is mounted quite simply. This we will talk about later.

To the merits of the same material should be attributed ease of transportation, practicality of the material. In addition, this coating has a long service life. The manufacturer, Tarkett, guarantees 15 years of impeccable material service, without changing the look and performance. It should be noted the ecological compatibility of the coating, which is confirmed by the certificate "Leaf of Life". Therefore, such a floor can be laid even in the children's room.

Many consumers have already used art vinyl for the floor. What they are, they know firsthand. Often this modern coating is compared to other materials. For example, its multi-layered and practicality resemble a good, high-quality linoleum, beauty and elegance bring it closer to the piece parquet. But there are also significant differences:

- artvinil tile, unlike linoleum, is able to diversify the floor design, since these are modules having different design, and not roll material;

- unlike parquet, it can be used on the "warm floor" system;

- the coating is very nice to the touch, it's possible to walk barefoot with pleasure, which is not true for tiles.

disadvantages

As you can see, many advantages have a new material - artvinil for the floor. Its price is equivalent to the cost of laminate. It varies from 665 to 1600 rubles per square meter. Some buyers think this is a minus. Although not everyone agrees with this.

Artvin vinyl for floor: instructions for installation by own hands

As we mentioned earlier, laying this coating will not be too difficult even for a person far from construction. However, it should be borne in mind that when working with this material, care and attention are necessary. Negligent attitude towards work will inevitably lead to mistakes that will affect the quality of the coating.

Stacking technology

Any finishing process is divided into several stages. It is no exception and laying flooring.

Obligatory surface preparation requires art vinyl for the floor. The technology of laying involves the fulfillment of this stage in the first place. The final result largely depends on the quality of this work.

Surface preparation

It should be noted on what surfaces this coating can not be laid. This is plywood, particle board, linoleum, fiberboard, wooden floor. In other words, on those surfaces that with time will begin to deform under the action of various loads. Consequently, the tile itself is deformed, and this can not be allowed.

The ideal base for artvinyl is a strong concrete floor, filled with screed. But remember that the cement screed in this case is not suitable. It is better to use self-leveling self-leveling floors.

The modern construction market offers a large selection of dry mixes for these purposes from different manufacturers. These are cement plaster or polymer compositions. It is more expedient to give preference to the latter. Such a surface has a small thickness, but at the same time an ideal surface, characterized by high strength.

After the screed is poured, it needs to dry thoroughly. Then the floor surface must be thoroughly cleaned from dust. This will help you a normal vacuum cleaner. Before cleaning, close all windows to avoid drafts.

Now you can proceed to the primer. It is better to use a two-component material based on polyurethane. It will increase the adhesion coefficient and strengthen the upper layer.

Layout

Once again, we remind you that you need to be careful when you lay artillery for the floor. The technology of laying involves another obligatory stage, which for some reason the home masters are neglected for some reason. It's about markup. It depends not only on quality, but also on the simplicity and ease of installation. For example, a well-marked scheme in a room of 40 square meters can be covered with tiles for one and a half to two hours.

First you need to determine the center of the room. To do this, apply the diagonals - their intersection and will be the point you need. Through the center, draw two perpendicular lines. They will divide the room into 4 rectangles.

Begin to lay the tile from the center, gradually filling it with all the plots. This scheme is direct. If you want to conduct a diagonal assembly, the markup will have to be done with additional lines - from the center at an angle of 45 degrees to the previously applied lines.

Final stage - installation

For the installation of artvinil tiles used acrylic adhesive. Its uniform layer is applied to the base of the floor with a notched trowel. Note that the glue has a strictly defined time, during which you can work with it. Typically, this is one hour. Therefore, the solution should be applied to a site that you can cover with tiles during this time. If you fail to meet the deadline, the adhesive should be removed and a new layer applied.

After applying the adhesive, do not start immediately. Allow him to stand for 8-10 minutes. After that, you can lay the tile. On the back of each module you will see an arrow that shows which way to mount the assembly. This greatly facilitates the process regardless of the selected floor pattern.

Each element of the coating is installed on the surface, previously smeared with glue, and pressed with hands. The edges can be rolled with a roller. Such movements are produced from the center to the edges of the panel. Tiles are laid tightly to each other, without gaps. This will not allow them to shift during operation under the influence of loads. Experts advise after 10-15 minutes to re-roll a new floor to be sure that the tile is well pressed and its edges will not wrap up after a while.

Artvinil panels on the edges of the room near the walls do not always come in whole. Therefore, they must be pruned. To make it is simple enough - by means of an acute knife. Take into account such subtleties:

- Trimming is carried out only on the front side of the cover;

- Accurate marking must be carried out, without allowances and tolerances;

- an incision with a knife at the place of marking is carried out strictly along the planned line.

- bend the tile in place of the incision and cut it with a knife completely.

During installation, the glue, when pressed on the tile, can protrude beyond it and leave a mark on its surface. This must be avoided. But if it still happened, immediately remove it with a napkin, which is better to moisten with alcohol.

Well, you laid the art vinyl for the floor. What is it, you now know how to put it - too. It remains to learn how to care for such sex.

After all the tiles have been laid, it is necessary to conduct a wet cleaning of the floor. It can be done only in three days, when the coating is completely glued to the base. After that, floors can be washed with water with the addition of funds that are designed for PVC products.

Customer Reviews

Today we presented you a new coating - artvinyl for the floor. Reviews about him were divided into enthusiastically positive and frankly negative.

The first group of buyers is completely satisfied with their purchase. They are comfortable with a stylish and diverse design, a fairly long service life, easy maintenance, an adequate price.

The second group of buyers notes the complexity of installation, poor quality of the tile, which after 5-6 months is peeled off at the seams. Experts from the company-manufacturer refer these reviews to poor-quality installation. Therefore, if you feel that you can not lay this cover yourself, contact the professionals.