AutomobilesCars

Antizatotevator car glass: description, reviews. How to use an anti-mist for windows?

The fogging of the windows in the car is a usual phenomenon, and in some regions it is ubiquitous. Prepare for it should be in advance, because to eliminate the trouble of ancillary facilities and at minimum intervals on the spot is quite difficult. But there is a risk of losing control over the road and getting trouble of a different kind. In advance to protect themselves from such misfortunes will help anti-mist car glass, which is available in the market in a variety of variations. The practice of using such means is ambiguous, but in case of the right choice and observance of the operating rules, one can count on a favorable result.

Electric anti-fenders

To begin the review costs from a regular means which have already in a base complete set many modern models. Typically, this is a small device that operates on the principle of a conventional hair dryer. If such a device is not provided for in the car, it can be purchased. In the selection it is necessary to pay attention to the temperature of the air flow, the speed of moving masses and power. Of course, the higher these figures, the faster the device will save the interior from over-wetting. Also worth paying attention to the material of the device. Usually, the anti-fouling of automobile glass has a metal base, but for safety reasons new devices are made of ceramics. Manufacturers provide them with automatic shut-off functions and protection against overheating. With regard to placement, the device does not provide any problems - it can be fixed to a sticky tape or bracket, and a normal 12-volt cigar lighter will act as the power source.

Reviews about Rain X

In general, this spray is suitable for use in the risk of condensation. Users notice noticeable changes in the areas treated with this composition. Only occasionally there is accumulation of water coverings. One of the main disadvantages of this remedy is the lack of a special pump with a nebulizer in some models. This gives some difficulties in applying the protective mass. More importantly, there is no visual distortion on the glass, which was processed by this anti-fog. Reviews often emphasize the ability of such drugs to rid the surfaces of drops, but they complain about the appearance of other problems. In this case, no side effects are found.

Fog Clear Spray Reviews

It can be noted that most of the auto chemistry in the domestic market comes from China. It is clear that the quality of this product is seriously inferior to European counterparts, but there are also pleasant exceptions. They are pleasant not only because of efficiency, but also because of the affordable price. This applies to the simple Fog Clear tool from GlassScience. The official test of the anti-misters of this brand, which was carried out in conditions of -10 ° С with humidity in the cabin at the level of 94%, showed that the glasses kept their transparency for several hours. As for the users themselves, they also note the good performance of these products. The composition does not allow water vapor to condense, clearing the surface and from contamination. By the way, not only car owners, but also motorcyclists positively respond about this spray.

Reviews about Gyeon AntiFog

The company positions the drug as a highly effective coating that prevents condensation. It is important to consider that this spray refers to long-term funds. According to users, the treatment retains protection from watery coating for two months. Also, the advantages of the anti-mist car Gyeon, include ease of application, economy and additional cleaning effect. For example, owners of heavy trucks indicate that only 20 ml is sufficient for a single processing of their vehicles. The applied coating will last for a long time, however, the drug itself is much more expensive than its counterparts.

How to use an anti-mist for windows?

First of all, the surface of the glass is cleaned. Depending on the composition and recommendations of the manufacturer, it may be necessary to use special means that will prepare the basis for the further formation of the protective coating. The second stage involves the direct application of a spray. Usually the bulk is laid or sprayed, after which the user blurs it over the entire surface. To do this, the anti-mist of the car glass is completed with a microfiber, which allows to optimally blur the composition without harm to the surface. The operation should be performed in a place where ventilation is provided, and without direct exposure of the sun to the work area.

How to choose the best option?

Most drugs of this type are positioned as universal agents, which attracts more customers. Indeed, all preparations are combined with a protective function directed against the formation of condensate. But there are many factors that differentiate compositions from each other. Among them, one can single out the conditions of use, the requirements for the preparation of glass, the duration of the effect, the principle of operation, etc. Having decided upon the requirements for a particular machine, it is possible to choose suitable anti-flammers for glasses. Councils of experienced motorists note that the quality of the composition does not necessarily stand in the lines of famous brands such as Shell and Liqui Moly, so it is worth analyzing and characteristics of less popular products. As noted above, even Chinese inexpensive sprays are quite suitable for use in an average threat of fogging.

Folk remedies as an alternative

One way or another, the formation of condensate on the windows is not a problem today, and not only motorists are struggling with it. And it is quite logical that many drivers do not spend money on auto chemistry, but turn to proven and at times no less effective means. In particular, gas mask manufacturers advise users of their products to lightly wipe the glasses with soap. This same trick is used by divers, treating similar solutions with masks and swimming goggles.

It is possible to make an anti-mist of glasses with your own hands and with the help of a familiar vegetable - potatoes. It is enough to take a pair of shoots, cut them into two parts and wipe off the surface of the glass with the evolving liquid. Then grind the potato juice with the same microfiber or napkin. Of course, with professional means such techniques are difficult to compare by the criterion of the long-term effect, but practice shows that for a few hours there is enough and such protection.

Use of napkins

When you do not have any means of protection from the fogging of glasses, it remains to use improvised inventory. The most accessible and acceptable from the point of view of efficiency is a napkin. Generally, for such purposes, car chemistry manufacturers produce special microfiber products, but a short-term result can be provided with a conventional clean cloth. To do this, moisten the cloth with water and, if possible, give it with a light cleanser available at hand. Best of all, if it is a special anti-mist of automotive glasses, but for a quick effect for 1-2 hours, any composition that forms the coating will suffice. The main thing is that the resulting layer does not cause optical distortion. Next, it is necessary to wipe gently with the napkin gently and without excessive pressure, until the glass becomes transparent.

Conclusion

Water condensation in the passenger compartment is easily prevented by preventive measures that are available to any driver. It is enough to use the equipment that is involved in creating a local microclimate correctly. First of all, it is necessary to turn on the stove and blow out the panes. On the one hand, this will smooth out the difference between the temperature regimes of glass and air, and on the other - even the emerging moisture will be neutralized by the action of warm currents. This is an elementary cunning, which should be taken into account, not forgetting about other measures.

For example, if you pre-fabricate the anti-misting glasses yourself with soap and potatoes and at the same time stock up on the microfiber, then the need for specialized tools will no longer be required. However, this applies to one-off trips in the face of suspiciously foggy weather. If regular movements are planned in this mode, it is better to treat the glass with a special preparation. His purchase will cost money, but the security level will remain the same.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.