Adhesive for foam blocks: choice and use

In modern construction, foam concrete is often used. This material allows to create a monolithic construction, which is characterized by high strength, as well as exceptional heat and sound insulation properties. In the process of erecting walls, glue is used for the laying of foam blocks, since cement mortar, as well as other construction mixtures, do not provide the required thermal insulation. Seams between blocks should allow heat and moisture to pass through. In this regard, in the construction process, it is necessary to apply glue for foam blocks. It should not be forgotten that this compound can be used only when the foam concrete blocks have a perfectly flat surface.

With the correct manufacture of foam concrete blocks, they must have the correct geometric shape. Only the adhesive for the foam block will provide the perfect heat and sound insulation for your future home. Masonry using glue quickly gaining strength, the paste penetrates well into the micropores, so it does not require the use of any additional adhesives. Adhesive for foam blocks very quickly grasps, therefore requires high qualifications of the mason. On everything about everything from the master no more than fifteen minutes. Acting must be neat and fast.

The foam block is an effective heat insulator, the heat is lost only at the junction of two neighboring blocks. The adhesive for foam blocks will ensure the uniformity of the wall and the absence of cavities. The main advantage of the masonry on the glue is the flawless flatness of the walls, which further significantly reduces the cost of finishing the walls. In order to apply adhesive for foam blocks in a thin and even layer, it is necessary to use a special equipment. In the end, the consumption of glue decreases, the quality of the seam improves, and construction costs are reduced.

The correct masonry and adhesive for foam blocks make it possible to create a reliable heat-insulating wall. In this case, you do not need to use an additional thermal insulation layer. The very technology of glue preparation is simple enough and does not require special equipment, which greatly facilitates the life of builders. To prepare the paste, you will need a dry glue mixture, water, a drill with a mixer nozzle, a large capacity. Walls laid out with the application of this mixture can be operated in the temperature range from -50 to +80 degrees. Given these characteristics, we can say that foam blocks can be used in different climatic conditions.

When choosing glue for foam concrete blocks, you should not opt for cheap products. As a rule, such savings lead to additional costs. Cheap products have minimal penetrating and gluing properties. Apply a thin layer of the mixture is very difficult, as a result, we get increased consumption, poor thermal insulation and unreliable masonry. Naturally, the products of brand manufacturers are much more expensive, but it fully justifies its price. The most popular glues are the following brands: Practitioner Bergauf, Finger Blok, Selform T-112. It should be noted that the consumption of such mixtures is minimal.