What characteristics must have tile adhesive for swimming pools

For the lining of pools most often used special tiles, which has not only an attractive appearance, but also many advantages. It is not susceptible to rotting and corrosive phenomena, does not react with minerals, is resistant to mechanical influences and high pressure.

Description

Adhesive for swimming pools water-resistant Consists of a sand-cement mixture of high quality and polymer additives. The composition is suitable for use in tanks designed for filling water and lined with ceramic or tile. The material is characterized by hydrophobic and adhesive characteristics, due to which it provides a high-quality fixation of the tile with constant exposure to water. Most brands can be used at higher levels of chlorine in the liquid. Tile adhesive for swimming pools It is characterized by elasticity, resistance to frost, water resistance, environmental friendliness and the absence of substances that can adversely affect health. The material can also be used for rooms that are prone to frequent effects of water, such as basements, ground floors, terraces and showers.

What you need to know

In order to enjoy the pool for many years, it is important to choose not only the material for the cladding, but also the liquid glue for fixing it. It increases the water repellent characteristics and the life of the coating. There are certain criteria that must be taken into account when choosing an adhesive:

• Water properties and temperature conditions;
• Depth of the tank;
• Location of the pool (in the building or on the street);
• Base materials and tiles;
• Size, mass and type of elements.

When using products with a large mass and size must be selected tile adhesive for swimming pools With an increased level of adhesion, it has a viscous structure that prevents the elements from slipping before the solution starts to solidify.

How to choose

In addition to the properties of bonded materials, the possibility of deformation of the base and geometry of the reservoir when shrinking and under the influence of the mass of water must be taken into account. For a base characterized by high susceptibility to deformation and flexibility, a polyurethane elastic compound or a preparation containing other highly plastic components is used.

The ambient temperature and location of the pool are decisive factors in the selection of the necessary adhesive. For an open tank suitable frost-resistant liquid glue that retains its characteristics at frequent temperature changes.

Strength and quality of the tiles are selected in accordance with the depth of the reservoir, that is, with increasing depth, the requirements to the reliability and thickness of the liner are raised, as a consequence, a glue with suitable properties becomes necessary.

Water can have a different chemical composition with a certain ratio of minerals and salts. When used in the pool, chlorine-containing and disinfectants are added to it, which affect the inner surface of the tank. That is why tile adhesive for swimming pools should be resistant to chemical attack.

Characteristics

To the fixing material high demands are made, it must possess the following qualities:

• High level of tightness;
• Prevention of fungal and mold development;
• Reliable adhesion of the surface of the tile and the base;
• Resistance to temperature changes;
• Preservation of the former characteristics under the action of salts and chlorine;
• High elasticity and water resistance.

Given the available characteristics and specific uses, the adhesive for swimming pools water resistant can not be cheap, so it will not be possible to save on it. It is worth giving preference to solutions from popular, proven manufacturers and carefully follow all the instructions and recommendations indicated on the package.

Preparatory work

The qualitative result depends not only on the correct technique of laying the tiles, but also on compliance with all preparatory work, which includes three main stages:

• Surface preparation consists of thorough cleaning from dust and contaminants;
• If there is an old paintwork, it must be removed, then level and sand the substrate;
• Preparation of the working composition (as a rule, 250 ml of liquid are taken per kilogram of dry matter).

It is worth remembering that ready tile adhesive for swimming pools should be used within 2-3 hours, after this time it will become hard and unfit for further use. The final hardening of the material will occur in three days, the process should take place under suitable conditions, in particular, in the absence of precipitation and other atmospheric influences.

What you need to know

The internal surface of the pool is always under pressure of a large amount of water, so all materials for facing, not only tiles, but also waterproof "Plus", must have high quality. When buying too cheap funds in unchecked stores, you can be very disappointed with the result. Low-quality products do not have all the necessary characteristics, which can be seen even at the preparatory stage and during the laying process. The tile does not adhere well to such compounds and eventually starts to move away from the base, which causes the tank to be repainted. Today, the stores offer a wide range of products, so when choosing it is worth to contact the seller-consultant, which will help you navigate among the variety of brands and brands. The adhesive waterproof price is in the range of 300-1000 rubles per package weighing 25 kg.