We make a merry-go-round with our own hands!

Children are very important space, where they could run and frolic. But not in every village there are sites near houses. To the guys were where to play, residents often have to invent something themselves. Some craftsmen can try to make a merry-go-round with their own hands. It will be an indispensable attraction for kids. How to make a merry-go-round by yourself? And what is needed for this? All useful information can be found in this article.

Kinds

To make a merry-go-round with your own hands for a children's playground, you must first determine its design. Their species are not so many, namely two. Simply other types of designs, where the seats are made in the form of different animals, ascending and descending during the movement, can not be made in the garage.

The first type is disk. This is one of the most common designs found in yards. They consist of a large disk (hence the name), to which are attached seats and handrails. That is, they are located as if on a platform. Therefore, it is convenient for children to stand on it, and it will be difficult to drop out of it.

The second type is radiation. Here a little differently. In such designs, the seats are as if from the bottom - the center. From the main tube, the smaller ones depart, on which the seats are screwed. But it has its advantages. If you make such a merry-go-round with your own hands, then you can ride it yourself. Just kick off the ground. You can not do this on disk. There needs a second person who will twist.

Features

It is very important to initially think about what the future attraction will be. It is necessary to take into account the material, the features of fastening and coating. The latter is also important. High-quality painting not only makes the carousel beautiful and bright, but also saves later from rust.

Too heavy a construction will be cumbersome, therefore for children it is inconvenient, as for riding on it it is necessary to put the big efforts. At first it can go a bit tight, but it's okay. If you constantly lubricate, then after a while the mechanism will be developed a little and will move as it should.

How to make a merry-go-round by yourself: design

The task is quite feasible. The main thing is to have the necessary tools and materials. You will help Carousels with your own hands the drawings presented in the article, but you can create your own original design.

A strong and large pipe is used for the base. It should be thick enough to support the weight of the children and the load they create when riding. In order to keep it firmly, it must be well fixed. Therefore, it is buried to a depth of about a meter. Then the surface is poured with concrete to ensure maximum immobility.

After all has dried up, it is possible to install a cylindrical ball bearing, having previously well lubricated it. To the inner walls of this part, you need to weld 4 pipes to make a cross. Each of them forms the radius of the circle of the carousel. In order for them to form a strong structure together, it is necessary to weld a hoop-tube. That is, the crosspiece will be welded one end to the bearing, and the other to the rim.

We make carousels with our own hands: assembly

Next, we need to make a foundation on which the children will stand. It is usually made of plywood or dense plastic. It is necessary to take into account the density of the material, so that children do not accidentally sell it. Therefore, it must be sufficiently rigid.

Corners are welded to each part of the crosspiece. Then 4 pieces are cut from the plywood. The base is screwed to the corners using bolts. Here the main thing is to accurately guess with the dimensions. Therefore, before you cut it, you just need to measure everything.

The base is already ready, on which you can stand and turn. But this is not enough. For children it is necessary to install seats and handrails. To do this, you need a pipe slightly larger diameter than the bearing itself. She puts it on top of him. Such a pipe must be welded all to the same crossings. It is then installed handrails - curved pipes in the form of the letter "G".

It remains only to make the seats. There is also nothing complicated here. Two small iron tubes are simply welded in the form of the same letter "G". And with the help of screws or bolts on them fixed plywood back and seat. And only then they are welded to the handrails. To each railing, you can fix 2 seats: from one side and the other.