Than to wash an acrylic bath in house conditions? Tips for washing up improvised and special tools

Perfectly clean plumbing is the aspiration of every mistress. However, choosing what to wash an acrylic bath at home, you should choose the right tactics. Otherwise, you can say goodbye not only with an unpleasant plaque, but also with the plumbing. Therefore, we will consider how to clean the acrylic bath in the home and what means are absolutely unacceptable for this coating.

Care instructions

Keep the acrylic bath clean is very easy. Therefore, before resorting to cleaning agents, it is recommended to simply wash it with warm water. Such a simple method will get rid of many small contaminants.

For regular preventive cleaning, use a soft sponge and a specially designed remedy (about how to wash an acrylic bath at home, it will be discussed below).

The washing process is extremely simple. Initially, the surface must be moistened with water. After that, a soft cloth or sponge is applied with a cleanser and the bath is wiped. The surface must be rinsed with water and wipe dry. To make it shine, you can use a wax polish.

The more often you resort to the usual washing of the surface, the less often you will begin to think about how to clean an acrylic bath from a raid at home. It is recommended to repeat this procedure once a week.

Prohibited funds

Acrylic bath has many advantages. However, she also has one significant drawback - this is a low mechanical strength. Therefore, it is important to know how to wash an acrylic bathtub at home to not only provide it with an ideal look, but also to protect the surface from damage.

It is strictly forbidden to use the following tools and equipment for this sanitary ware:

1. Brushes that have a metal or other hard coating.
2. Cleaners, which contain substances: chlorine, ammonia, acetone, formaldehyde, abrasive components.
3. Washing powders.

It is strictly forbidden to wash the bath "on dry". Purification always involves the use of water.

Means, intended for cleaning acrylic bathtubs

For washing the surface it is allowed to use liquid substances, which do not contain aggressive components. This will quickly and easily clean the plumbing.

There are also specially designed tools for these surfaces. So, what to clean the acrylic bath at home?

Consider the most popular tools:

1. "Acrylan". The substance very quickly affects the surface and is quite effective. It removes mold, rust, soap residue, plaque. Does not leave after itself microdamages, scratches. The bath after use of this product is covered with a light protective film.
2. Ravak. These are the remedies that are used to remove grease, stains, rust, scale. They perfectly disinfect the surface.
3. "Acryl Polis". Effective agent for the acrylic surface. It differs in low cost.
4. «Tim-Profi». A modern product that does not contain abrasive ingredients. It allows to achieve crystal clearness and thus does not leave scratches.
5. Mr. Chister. A fairly cheap solution that can effectively eliminate rust and plaque. In addition, this drug has an antifungal and antibacterial effect.

Removing the water stone

The main problem that arises in people who have installed an acrylic bath is a plaque on the surface. However, it is not difficult to eliminate it. So, than to wash an acrylic bath from a raid in house conditions?

To remove water stone, the following measures should be taken:

1. Collect warm water in the tub. Its temperature should not be above 30 ° C.
2. Add vinegar to the water - 0.5 liters. Instead of this component, you can use citric acid. The bath will need 1 packet.
3. Hand mix the water. Leave the bath in this condition for the night.
4. Waking up in the morning, let the water out. The surface must be rinsed. Then wipe dry with a towel.

Such measures are quite enough to get rid of the raid. But what if there were too many water stones and could not completely eliminate it? Than to wash an acrylic bath in house conditions? From the plaque, the above-described cleansers will perfectly work. For example, liquid "Akrilan" or RAVAK Turbocleane.

Getting rid of yellowness

For acrylic surfaces, such defects are completely uncharacteristic. Often yellowness occurs in the baths, made of inexpensive plastic, which has a protective layer.

Initially, it should be said that such spots appear from poor-quality water, a sharp change in the temperature of the liquid. It is on these situations that the plastic reacts with the formation of spots. In addition, it is very important that acrylic is always dry. It is absolutely unacceptable that the bathroom should be stagnant. Be sure to check the valves. Of these, do not drip water to the surface.

It is necessary to remind once again, than to wash an acrylic bath. From yellowness at home, the cleansing agents specially designed for such coatings will be perfectly cleaned. You can use the substance "Akrilan". An excellent liquid is Tim-Profi. Such a tool effectively cleans even very neglected surfaces. In addition, it perfectly disinfects the bath.

Perfectly clears the yellowness of citric acid. It is recommended to dissolve 1 packet in 1 glass of water. The resulting liquid is applied to the acrylic surface. Then rinse it thoroughly. Your bath will again become white.

Checking the tool

If you do not have the right fluid at hand, you can use another one. However, how to choose the one that cleans well and does not harm the surface?

Initially, be sure to study the composition of the substance. The product should not contain aggressive ingredients.

Further, to determine what to wash an acrylic bath at home, it is recommended to resort to a small trick. Apply the selected liquid to a small area. Choose a low-profile area. For example, from the side. And it is best to apply the product on the bottom of the bath. Leave the minutes at 20-30. After that, rinse this area. Carefully examine how the bath reacted to this cleanser.

If defects were not found, then the liquid is fully suitable and you can start the washing procedure.

Bath disinfection

Acrylic surfaces, as a rule, do not promote the growth of mold and microorganisms. However, even they need regular disinfection measures. Therefore, planning, than to wash an acrylic bath at home, be sure to think about such a cleansing. This is especially true for families with children. Do I need to crash additional risk?

Disinfection of the bath is a simple enough exercise, which is recommended once a year.

To conduct the procedure you need:

1. Collect warm water in the tub.
2. Add a little disinfectant to the liquid. You can use the above-named liquid "Tim-Profi". Stir water.
3. The bath should remain in this state for 10-15 minutes. Then release the liquid.
4. The surface must be rinsed. All remnants of the solution must be removed. Do not forget to wipe the bath dry.

Disinfection with chlorine

There is another method that allows you to clean the surface. However, one should be extremely cautious with him. Because a high consistency can damage the surface.

To disinfect chlorine, use the instruction:

1. Type the water in the tub.
2. Add chlorine to it. The solution should be 7%. Carefully follow the consistency.
3. Wait a few minutes. Then open the sink.
4. Rinse the surface thoroughly and wipe it dry.

A clean solution of chlorine wipe the acrylic bath is strictly prohibited. It will not only damage the surface, but also leave behind itself yellow hideous spots.

Caring for acrylic baths is not particularly difficult. The main thing is to make all the procedures regularly and use only those means that will not damage the surface.