Stretch ceiling - how to do it yourself?

Today everyone knows what a stretch ceiling is. How to do it, in principle, it is clear to everyone. But how to mount it yourself, and is it worth doing it yourself? Our answer is not worth it. Everyone must do their job. And let the ceiling draws a specialist. But if you can not wait to do everything yourself, we will give some advice.

What do you need to work?

It will take the material itself, which can be either film or fabric. From tools - spatula, straight and semicircular. You also need a baguette for finishing the joints, self-tapping screws, screwdrivers. The main tool that you need, you can call a building hair dryer. True, professionals use a construction gun, which greatly accelerates the work, because it heats a large surface.

Getting Started

First, you need to conduct the wiring and connect all the lights, taking into account the fact that for a stretch ceiling the maximum power is 50 watts. Now let's talk about how to do stretch ceilings. Photos of the process are available in specialized magazines or on the website of any construction company. So, screw the ceiling profile to the walls. It should be taken into account the lowest point of the ceiling. It will be necessary to start from it in work. Initially, the profile will need to be glued, and only after you are convinced of the perfectly flat location, it can be fixed with screws. After that, warm up the room to 40 degrees. This temperature must be maintained throughout the installation process. The ceiling material is heated to 60 degrees. This will facilitate the tensioning process and prevent tearing of the blade. To fix a ceiling it is necessary from one of corners of a room. Then it is charged in the opposite corner, and so on. The last corner will be the most difficult, because the weight of the canvas will fall to the center. After all the corners are fixed, you can go to the very canvas. It must be filled around the perimeter with a spatula, evenly stretching the film.

Completion of work

Well, the stretch ceiling (how to do it, we just found out) is fixed completely. But there are some defects: excess material, wrinkles and wrinkles on the surface, not very beautiful seams. Correct all the shortcomings. The material that turned out to be superfluous is cropped. We fold the wrinkles and wrinkles with a construction hair dryer and smooth it. The place of attachment with the wall is closed with a baguette, which can be either simple, classical, or matched to the general style of the room. Well, here we are and figured out what a stretch ceiling, how to do it yourself, and realized that it is not so easy.

As for how to do stretch two-level ceilings, it should be borne in mind: a simple flat ceiling is much easier to pull than to do it in several levels. There are a lot of options, and they are all quite complicated in execution. Therefore, if a simple flat stretch ceiling can be made independently, then it is better not to risk and call a master.

Let's sum up the results

We told about the stretch ceiling - how to do it yourself. But it's better not to experiment. From my own experience it can be said that no one will do better than a real master. So, when buying a ceiling, also order its installation. The cost of work will be much cheaper than the spent effort, time and nerves for self-installation.