Staples for staples: types, sizes. Types of staplers by designation

Every person who has had to deal with documents at least once in his life will confirm that the staples for staplers (types, their sizes in this case do not matter) are much more reliable to fasten the sheets than the paper clips. That is why the stapler so quickly gained popularity in the world of office supplies, and no one enterprise, even the smallest, can do without this device.

What is a stapler, and what is its purpose

The device for binding ("stapling") of papers is a office stapler. This small device is designed to "stitch" several sheets of paper with a thin steel wire (curved in the form of a staple).

The first stapler appeared in the eighteenth century in France from its ruler - Louis XV. However, then the staplers were more of an interesting curiosity than an important device.

But John McGill in the middle of the nineteenth century (when science began to develop, as well as bureaucracy) saw prospects in the production of staplers and, having slightly modified the time model of Louis XV, patented this device. Soon, the stapler John McGill, made of brass, capable of reliably and, most importantly, fast, fastening sheets of paper, has become an incredibly popular device.

Types of staplers by designation

Since the appearance of the stapler many years have passed, and during this time its design has been improved. Therefore, today there are several types of this device.

The cheapest and most common are pocket stationery staplers. They are small in size and can hold no more than ten sheets. As a rule, they put staples for a stapler "10". They are designed for stitching sheets in road conditions. For example, when you go to a bank, you need to make out the documents. Schoolchildren and students often use them to fasten their abstracts. That is why very often pocket staplers have a bright, even slightly "toy" design.

The price of such devices is low, however, as well as the service life.

Desktop staplers in appearance are very similar to pocket staplers, however they are more powerful and larger in size. Typically, they are used in offices or small companies, as well as in schools and universities for "stitching" documentation. Depending on the model, they can bind from ten or more sheets.

Specialized stationery staplers have a slightly different design than the previous varieties.

They have a lever for pressing, since such a stapler can sew about two hundred and fifty sheets at a time. Therefore, it uses longer and sharp staples for the stapler. The price of such a device is quite high, so it is used often in large offices, as well as in printing houses.

All of the above models were of a mechanical type. There is also an automatic clerical stapler. It reacts to the movement, and when it is on, to attach the paper, it is enough simply to shove them into the special hole of the stapler. This device works from finger batteries or from the network.

At the end of the twentieth century, a new stapler was also invented by Christian Berger, "stapling" documents using a paper tape cut from the fastened sheets themselves. This device does not need staples.

There is also a construction stapler. However, unlike stationery, he even uses braces, but does not flog through them and does not bend. In other words, the staples of the construction stapler serve as the bent nails.

In addition to construction, there are also packaging and industrial staplers.

Staples

Staples are small, n-shaped wire products that "sew" papers together.

Depending on the purpose, they are different in length, width, and also in the metal from which they are made. So that they better stitch the papers, the tips of the staple feet are always sharpened.

In the early models, the bracket had to be inserted one at a time. However, in the twentieth century, the company Boston Wire Sticther Co. Invented a method how to fasten with the help of glue staples for a stapler. Types, sizes of staples now did not matter. Bonded with glue, they easily refilled into the device, simplifying its use. Since then, all staples are sold in the form of glued strips, which are easily inserted into the stapler.

Staple staples: types

Dimensions of stapler brackets are different. However, before you understand them, it is worth paying attention to their types. So, there are staples for a stationery stapler and for an industrial stapler. The main difference is not only in the types of staplers for which they are used, but also in the thickness and strength of the staples themselves.

Stationery staples for ordinary pocket or desk apparatuses are made of thin, but rather soft wire. For packing, building, and also super-power stationery staplers use brackets from more strong materials.

Dimensions of staples for stationery staplers

Each stapler corresponds to a certain size of staples. It all depends on the number of sheets you need to flash.

The most common staples for the stapler are "10". For most other brackets, which differ from the standard "10", the name is immediately two figures. The first is the number, and the second is the length of the pointed stalk of the staple.

For most staples for office "stitchers" the length of the foot is identical, but the size may be different. Therefore, before there how to buy staples for staplers (the price for them is usually small), you need to carefully read their size on the package from the device.

The smallest clamp bracket has the size "21" - the length is 7 mm, whereas in the traditional "10" - 9 mm. The biggest clamp is "24", while the length of the legs can be 6 mm or 8 mm. So when you buy, you need to be very careful.

The most common staples for the stapler (8 mm length of the foot): "24/8", "26/8". With a leg length of 6 mm - "24/6", "26/6".

Staples for the construction stapler

Unlike the office stapler, in the building the most common size of the staples is "53" (width 11.4 mm, length 4-14 mm). They fit most building devices, regardless of their subtypes. By the way, many building staplers due to the universal design can use several types of staples.

For more durable "sewing" of wooden and other surfaces staples are used with the numbers "36", "140", "300" and "500". Since the length of the legs for all these numbers can be very different, you need to carefully read the accompanying documentation.

Prices for staples

As a rule, the price of staples is rather small - about 15-30 rubles per thousand pieces of "10" size (stationery staplers). Staples the size of "24" or "26" cost a little more - 30-60 rubles per thousand pieces. Specialized staples designed for a certain stapler model, are more expensive. As a rule, the price is regulated by the manufacturer, and often there is a large mark-up for the brand.

As for staples for construction staplers, because of the use of more expensive materials in their manufacture, they are more expensive than clerical. So, the most common size of "53" on average costs about 300 rubles per thousand pieces. The remaining dimensions, as well as specialized staples are worth more.

How to insert staples into a stationery stapler

Having learned, what are the staples for the stapler, the types, their sizes, it is worthwhile to figure out how to insert them into the device itself.

In most such devices, in order to insert glued staples, it is necessary to open the top cover, pushing the spring back. Then place the bracket in the released compartment and release the spring, which immediately fixes them. Next, you need to close the stapler cover and check on any sheet of paper whether it works. If the sheets of paper are not sewn as they should (the bracket is bent, two or more are used at the same time), it is necessary to check the correctness of the filling, as well as the size.

How staples are inserted into an electric (automatic) stapler

In an automatic clerical stapler, the staples are inserted slightly differently. Before doing this, the unit must be disconnected from the mains or pulled out of the batteries. Then, pressing the "rev" button, push the slot for the brackets from above on the paper connector. Insert brackets, push in the slot, turn on the machine and check its operability.

How to insert staples in a stapler

The most commonly used construction mechanical stapler. Filling it with staples is a process rather like using a stationery. To insert the glued staples, it is necessary to pull out the spring in the lower section. Next, gently place them in the open connector and lock by inserting the spring until it stops back.

After the staple installation is completed, you need to check the operation of the device.

Today, a stapler, along with a punch and folder-folder, has become an integral attribute of every office, as well as a workshop (if it concerns the building type). To pick up braces to any of these devices, and also to fill them it will not be difficult even for the child. The most important thing is to clearly know the size and type of staples used and not to disregard the safety rules.