Selection and installation of metal-plastic windows

Installation of metal-plastic windows is a matter requiring accuracy and experience. That's why it's better to trust the experts. Experienced installers will do their job quickly, efficiently, in compliance with the installation technology and safety precautions.

How is the installation of metal-plastic windows?

To begin with, the old frame is removed and the opening is cleared to install a new structure. When getting a complete set, it is recommended to visually inspect the products for scratches, cracks and chips. The frame must be in a protective film, which is subsequently removed. Fixing the product is possible on the anchor and plate. It all depends on the design of the window and the material of the wall in which the opening is located. Between the frame and the wall the foam for sealing and warming is blown out.

Choice of metal-plastic windows

Modern advertising and marketing put the consumer in front of a huge selection of PVC products. To choose windows that suit you both in quality and price, you need to know a few rules:

• Choose the company that produces PVC products, which has been working on the market for the production of metal-plastic windows for a long time and has proved itself well over the years of its existence. Be wary of firms "one-day", which entice the low price and short terms of manufacturing and installation of products. Usually, such firms produce their products not under the Gosstandart and under improper conditions;
• If your apartment is angular or your windows overlook a busy road, then you need an increased level of sound and heat insulation. These conditions will provide you with a double-glazed windows and a profile with the presence of 5, 6 or 7 chambers. Double-glazed windows do not freeze in the cold and keep the heat in the room for a long time. A wide profile also affects sound insulation and thermal insulation;
• Do not save on the quality of the components. Choose high-quality accessories, because its operation will be frequent and long-term. The accessories must have a manufacturer's logo. The sash of the window should open and close with ease, and also make a turn from the usual position to the position of the top opening (if it is stipulated in the contract);
• Installation of metal-plastic windows should be made at an air temperature on the street not lower than - 10 degrees;

• The quality of metal-plastic windows largely depends on the technology of its production. Pay attention to the profile surface - it should be smooth, smooth and have a slightly milky shade. The glass unit must be absolutely sealed and have tight sealing gaskets. If you look at the double-glazed window in the section, then inside you will see the slats filled with silica gel - a substance that can absorb moisture. The frame must be equipped with holes through which air exchange takes place and eliminates excess condensate;

Installation of plastic windows should be done by experienced specialists who have the necessary skills and have all the necessary equipment. Do not forget about the warranty on the products from the manufacturer.