Router D-Link 615 DIR - setting for Beeline, Rostelecom, Ufanet. Ways to configure IPTV

In this article, let's talk about the D-Link 615 DIR router, about tuning and features. Now you can find several options for this modem, but they work the same way. Therefore, there should not be any configuration problems for anyone. It does not have any unique systems. All the tips and recommendations described below can be called universal.

Router Features

Before setting up a router, you need to understand all its features and features. The maximum speed of the device is 100 Mbps. The same indicator has a network with a wired connection. The Wi-Fi access point operates at a higher speed - 300 Mbps. The device operates with the world-known technology - IPTV. Use the device as a print server from the owners will not work, because it does not have an additional USB port. Also it is forbidden to connect a 3G modem. Otherwise, it could transfer 3G and GSM to the router.

Set

The device is standard, nothing stands out. There is a router itself, a twisted pair (1 m, crimped ends), a power supply, and documents that make it easier to use the device. If you need a complete guide, you can download it from the official website of the company.

Preliminary data

To configure the D-Link 615 DIR, you need to specify the data that is required to send the Internet directly from the provider. It is because of this that we should study the treaty concluded with it for a more detailed understanding. It should specify the network address, connection, login and password. If they are not spelled out in the documents, then they should be specified in the service center of the provider. They need to be recorded and saved all the time while the consumer uses these services. This will reduce the time for setting the router for further failures.

Temporary connection

Configuring the D-Link 615 DIR router should be done either on a desktop computer or on a laptop. Best of all, if the technology is a device that does not change its location. The router must be connected temporarily. What do I need to do to make the settings?

• The computer and the router must be turned off.
• It is necessary to connect the network device cable to the power supply, the other end to the router.
• Next you need to take the interface wire. It must be connected to the computer and any port of the router called LAN.

This is how the temporary connection is made.

Enable and configure

Continuing to configure the D-Link 615 DIR for Ufanet or another provider, you need to enable it with the computer. Next, open the browser, enter the network address in any search engine. Often it looks like two three-digit numbers, followed by 0 and 1, separated by a dot: 192.168.0.1. Then you need to press "Enter" and wait for the connection. A menu pops up in which you need to specify a username and password. This data is in the contract. Basically they are standard and the same: admin. After entering, the router control panel opens. It is necessary to find the menu "Advanced settings". In them, the user is interested in the "System" item. There you should find the menu responsible for the language in which it can be changed to Russian. After clicking on the "Save" button, the changes take effect. Those who are fluent in English can skip this recommendation. As a rule, when setting up the D-Link 615 DIR for Beeline, the process is so easy that the entire interface is understandable in a foreign language.

Then go back to the "Advanced Options". They are interested in the WAN menu. It is here that you can set all the parameters that the provider prescribes. This is a permanent or changing network address, the type of connection, login and password to work with the signal. After you specify them, you need to save the data and go to the wireless network menu. In it, you need to configure all the parameters: name, encryption, login and password of the access point. Next, you need to save the changes and exit the control panel.

Transfer to a permanent place

Of course, many are interested in the fact how to configure the router not by the time scheme, but by a constant one. You need a network cable, which is issued by the provider, connect to the WAN connector. All other cables are to LAN ports. The power supply should be plugged into the power outlet and the back end of the cord to the router. Next, you need to wait until the network device is turned on and loaded. How to understand? The "Energy" indicator stops flashing. Further, the configuration of D-Link 615 DIR for Rostelecom and another provider is not needed. The user should only test the computer network.

Twisted pair test

How to connect the router itself, has already been described, but on this all the manipulations do not end. You must configure the connection to the router. To do this, after turning on the computer, go to the "Control Panel". There will be a menu "Network connection". Having opened the parameters in this section, it is necessary to activate the function responsible for obtaining the address of the access point in automatic order. It's enough to re-save and open the browser.

Next you need to go through any link, the Internet should appear. If this did not happen, then there was an error at one of the connection stages.

Wireless connection

We have already described how to configure and connect a router. Now you need to consider how to get a working wireless network.

To do this, you need to find on any device (laptop, tablet, phone) the menu responsible for receiving the Internet signal, turn on Wi-Fi. Next, you need to start the network search and find the one that was created when the router was configured. After specifying the login and password, you should try to access the Internet through the browser. Open the start page and check the connection.

IPTV technology

Any modern router works with IPTV technology. What is it for and how does it work? Thanks to the Internet and special equipment, this technology allows you to output channels to the TV. To connect the set-top box and the router to the screen, a special port on the device and a twisted pair are used. It is necessary to properly configure IPTV on D-Link 615 DIR.

We described how to enter the control panel. It is on this recommendation that you should go back there to configure the software. In the menu that opens, the user enters the IP-TV section. When you select it, the setup wizard will automatically start. It will ask for the port to which the console is connected. The screen displays an image of the available connectors, just click on the desired one using a standard manipulator.

In the event that the provider uses virtual networks to transmit the TV signal, additional settings should be made. It is necessary to go to the VLAN tab. In it, you need to configure a group of ports that have received a transparent type, you need to add a physical connector D-Link 615 DIR that works with the prefix. The settings should be saved and exited from the browser.

Software Upgrade

Completing the settings of the router, it is necessary to check the software update. How to understand which version is installed? It's written on the box and on the router itself. If this method of clarification is not clear, you can go to the control panel and look into the right corner. At the top next to the company logo will be the firmware version of D-Link 615 DIR. The setup goes on quite quickly.

After you need to look at the official website of the manufacturer, going to the "Search" menu. You can find information about the update using this section. If this option is not suitable, then you should pay attention to the drop-down list of all available modems of the company. In it, you need to select the name of the described router. There will be a "Downloads" item, which describes the new version of the security and a link to its download.