Roof gutters for roofs

It can be said that the drainage systems on the roofs are created in order to protect the surface from a large amount of moisture. Gutters are becoming an integral part of such structures. They help to prevent the destruction of the foundation, which really happens under the influence of many environmental factors, including water in large quantities.

About drains

At the lowest point of the roof, water may linger, even when it drains, so that proper installation of drains allows additional protection. Only the degree of efficiency of water intake should be the main factor in choosing the location in which the drainage funnels will be installed. For example, their installation is not recommended near supporting columns. Otherwise, the base of the roof will be deformed, and if earlier these points were lower, now they can become the highest, especially if the base slope is not sufficient.

Additional information about the roofs

Strong downpours sometimes provoke a collapse of the roof due to too much water accumulation on it. Builders usually provide livevnyki for additional water discharge, although drainage funnels also solve this problem. In addition, the storm catcher can help in cases where the roof space is clogged - this design begins to discharge water when its level exceeds a certain limit.

Some rules and fineness of erection of funnels

The collection of water becomes one of the main functions for such an element as drainage funnels. For the hull of this funnel is characterized by the presence of a side, fairly wide. In the funnel itself, the main elements are the clogging barrier of the receiving hole, a protective grille, a crimping metal flange or an apron. Only in the lowest places of the roof should there be funnels. The main thing is to evenly distribute these devices over the surface.

Additional tips

It is better to use such a structure as a two-part gutter, the price of which may be slightly higher than that of conventional products. Funnels should have some reserve in order to protect the surface from the environment, after all, the heater itself undergoes various deformations during operation.

About other activities

It is important to take into account the speed and volume of precipitation, in order to correctly calculate the amount of rainwater roofing funnels needed. The structures themselves require additional regular care and inspection, as well as the removal of excess contaminants. If necessary, perform emergency repairs. It is important to leave at least 50 cm of space between the funnels on the entire surface. The minimum number of funnels is two, this will create an optimal protection against excessive moisture. Some install more and more - it all depends on the original characteristics of the roof. You can additionally consult with the sellers.