AutomobilesCars

Review of ways how to understate the machine

This article is overview. It discusses common ways how to understate the machine. Technically, to explain in a few words and give specific advice on the modification of the vehicle is impossible.

Change in suspension height: "for" and "against"

To the question: "Why are cars understated?" - the answers are as follows.

  • It will be faster to drive, racing cars are low.
  • The machine will be easier to manage.
  • It is beautiful.
  • It's fashionable.

To speed the car and ease in management brought its own vehicle to the racing car, invest in it will have enough funds. To improve quality indicators only expensive modification is capable. It is unlikely that owners of VAZs will be able to re-equip this.

Improving driving performance? To ride with a low suspension on Russian roads is to condemn the car for quick wear. The potholes will touch the bottom and it is unlikely that this will increase the speed.

Beauty and fashion ... There is nothing to argue. Everyone chooses the design of the machine himself, and if the low car is a dream, then there is nothing to say against this argument.

Decided to understate - looking for ways.

Ways of understating machine

An overview of ways how to understate the machine.

  • Air suspension - the most effective way, but at the same time the most expensive.
  • Installation of a special suspension, in which you can independently adjust the clearance. In the complete set with a suspension bracket the complex of special springs is applied.
  • Installation of the suspension manufactured by the factory way. The springs are already mounted.

The above methods require economic costs. And how do those who want to save money understate the car?

  • Install short springs without changing the shock absorbers.
  • Trim the springs.
  • Lower the height of the car due to low tires and even always carry a bag of cement in the trunk, remove the "extra springs".

Who can help in improving the vehicle?

Where can I understate the car? Those who have the opportunity to purchase a vehicle "on order" receive an understated factory assembly machine. The fact that the factory modification is expensive, it is not necessary to explain.

Qualitatively mount the understated suspension can be in the SRT, there can also reset the springs or cut them. Some pruning springs and improving are engaged in their own garage.

Loading into your own trunk something heavy to reduce the ride height does not require any special room, no qualification.

Lower the suspension correctly

Before you lower the suspension of the car, it is worth remembering that the designers of the model have provided the optimal combination: reliability-compliance, therefore, you need to thoroughly familiarize yourself with the technical characteristics of the machine.

Failure to install the suspension can cause deformation of the entire structure. Having decided to reinstall the suspension, it is better to spend extra money, but to buy the kit together with the factory springs provided for installation in a specific working unit.

Cutting the springs yourself, even after reading the manual, you need to keep in mind: the sensitivity of the spring and the strength at the time of modification are changing. And to predict how, is quite difficult.

If there is an opportunity to turn to professionals, do not neglect it.

Low springs

If, after getting acquainted with the ways how the car is understated, the choice is made in the direction of shortening the springs, then one must have an idea of the difference between the shortened spring and the factory-made part.

The appearance of the car from what there are springs, does not change. But during the movement, having installed self-clipped springs, you feel uncomfortable. The car vibrates, every pothole you feel on yourself. The machine very quickly becomes unusable, the suspension is destroyed, the body is deformed.

Factory suspension is made of high-strength steel, cold winding method. Due to their special strength, they perceive the shock load for a smaller stroke of compression of the suspension and operate without shrinkage. Their service life is longer than that of cut springs, and thanks to their installation, the machine is not deformed.

Springs of factory manufacturing can be selected depending on the brand of the machine, which needs to be modified. They do not weight the car and improve its driving performance, do not interfere with rapid acceleration and do not contribute to increasing fuel consumption.

Of course, when installing such springs, you need to think about the shock absorber. It is desirable that the modification and re-equipment of the car involved professionals.

Someone likes understated cars. Photos of them are placed at their head, and the ground clearance of their own car is lowered, they think that a tall car is unaesthetic. Someone thinks that understating cars is unreasonable, especially in off-road conditions. The decision is made by everyone.

But you need to remember that lowering the car should not be dangerous for anyone who sits behind the wheel, or for others. And this happens only when the modification is executed qualitatively.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.