TechnologiesElectronics

Projector Benq W1070: overview, specifications and reviews

Projectors for home use occupy a rather specific niche in the entertainment multimedia market. Firstly, this is not cheap equipment, even in the initial segment, and secondly, serious competition with mini-cinemas is hindering the wide distribution of such devices. Nevertheless, the projectors have a sufficient audience of fans of high-quality "pictures", especially if it is a multifunctional equipment with the inclusion of modern technology. In this regard, the short-focus model Benq W1070, the overview of which is presented below, is unique just by the combination of high-quality hardware stuffing, moderate for its price segment and a rich spectrum of communication capabilities for connection.

General information about the projector

The model is positioned as a medium-level DLP projector, which is designed for home use. However, the boundaries in the segments are rather blurred, so this device can be considered both a good solution for the office, and as a budget equipment for private use. Actually, the equipment belongs to the initial level, and the cost, and poor equipment. A VGA cable, a power cord, a remote control and a software disc are the entire kit with which the Benq W1070 is supplied. The price of the device varies on average from 60 to 70 thousand rubles. This is inexpensive, given the active expansion of the class of multifunctional models from 100 thousand rubles. However, in the middle segment there are enough competitors with high performance indicators.

Specifications

Against the background of the distribution of ultramodern formats for transferring images such as UHD and 4K, the capabilities of this model look rather modest. Nevertheless, the high quality of the projector Benq W1070 and decent performance indicators allow him to make a strong competition for the leading class. The characteristics of the device can be represented as follows:

  • The resolution is 1920x1080.
  • The light source power is 240W.
  • The lamp has a service life of 3 500 h.
  • The parameters of the diagonal are from 102 to 600 cm.
  • Frame scan - frequency from 23 to 120 Hz.
  • The power of light radiation is 2 000 lm.
  • The contrast ratio is 10000: 1.
  • The noise figure is 33 dB.
  • The HDTV format is up to 1080p.
  • Dimensions - 31,2x10,9x24,4 cm.
  • Weight - 2.75 kg.

Design and controls

The developers of the model did not look for unusual formats of the design to attract the client with the originality of the design and applied the traditional concept of the block projector. The case is made of glossy plastic, while the front part is decorated with a gray insert. On the same side, the projector Benq W1070 has a ventilation grille, lens and proximity sensor, which, if necessary, blocks the supply of light. The main slots and connectors of the device are located on the back. Here, in particular, there is a special trigger for connecting motorized screens.

The sides, with the exception of the ventilation holes, do not have anything. The bottom of the device is equipped with a grill for air passage, as well as threaded fasteners for the bracket with a supporting leg. The main elements of the external control and the power buttons of the Benq W1070 are located on the top panel. In the groove, which also contains gray inserts, rings are provided for adjusting the scale of the image and focus.

Interfaces and Communication

For audio and video equipment for several years, it is mandatory to support the HDMI interface as the most modern means of connection. Although this cable is not included in the basic configuration, the projector provides two jacks of this type. Also, the back side of the device allows you to connect devices through the composite input, VGA, S-VIDEO and a relatively new format of the RS-232 connectors. For audio, RCA channels and a standard mini jack are provided. Also Benq W1070 supports mini-USB technology. It is worth noting that modern projectors, despite the development of hardware, often have problems with sound. The creators of this model thoroughly approached the implementation of the acoustic system. The model is equipped with a speaker for 10 watts, which, judging by the reviews, copes well with the reproduction and sound track in films, and musical parts.

Operating modes

In addition to the basic set of formats with different settings, Benq offers two original viewing modes - SmartEco and EcoBlank. In the first case, automatic adjustment of the lamp power of the device is proposed, supplemented with an intelligent brightness setting taking into account the minimization of power consumption. This means that with the optimal contrast and saturation "picture" settings, the user Benq W1070 can also expect a minimum level of power supply. Even more economical mode EcoBlank automatically turns off the projected light stream if the device is not used for a certain time. In this case, there is a gradual reduction in the power of the signal source, which allows to reduce energy consumption by almost 70%.

Positive feedback about the model

As the practice of operating this model shows, the manufacturer was able to maximally reveal the operational capabilities of the hardware filling. Users note decent image quality with high lamp brightness. The advantages of a short focal length are also underlined, which also provides advantages in the viewing process. The latest technological innovations, the projector Benq W1070 is not deprived, but the presence of 3D technology compensates for this flaw. In general, the main advantages of the owners of this device include ergonomics, a high level of which can be traced in every detail. But first of all it concerns the external control elements of the settings on the case and the remote control.

Negative feedback

Serious drawbacks in terms of the direct function of the image translation users do not note. As for the other nuances, many owners complain about the noise of the projector, which is caused by the fans. Strangely enough, there are also complaints about the presence of speakers. According to some users, the projection equipment is not designed for acoustics, so the sound reproduction function seems unnecessary. However, there are other opinions about the speakers Benq W1070. Feedback from users who appreciate the versatility of multimedia technology, for example, note the benefit of the built-in speaker. So, if you plan to use the projector in the country, where there is no special sound technology, such an addition is simply necessary.

Conclusion

Modern projectors have to fight hard on the market with plasma and liquid crystal panels, which are successfully used as home theaters. Understanding the popularity of traditional solutions, manufacturers strive to surprise the consumer with new functions and communication capabilities. However, a very different example shows the projector Benq W1070. The price of the device is 60-70 thousand rubles. Is not due to a wide range of options, but a high-quality element base and a thoughtful technical stuffing. This option is not suitable for connoisseurs of high-tech fashion functions, but for those who expect to get a decent quality with minimal investment. In the same concept, by the way, fit the proprietary modes of the projector, designed for a balanced energy consumption.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.