Production tables. Key manufacturers of neutral equipment

No industrial kitchen can do without neutral equipment from food grade stainless steel. It is thanks to all sorts of tables - professional and cutting - workers are provided with comfortable workplaces, have the opportunity to place their kitchen equipment and small equipment so that they do not interfere with the process.

In this article we will consider the stainless steel production table, its varieties and key manufacturers of neutral equipment. It should be noted in advance that it is not recommended to replace certified stainless steel products with cheaper, faceless analogs, as this is fraught with fines at the first check. All manufacturers are required to provide you with a package of documents confirming their right to manufacture furniture that will be in contact with food.

Tables. Characteristics and varieties

The production table should be made of 430 or 301 food grade steel up to 0.1 cm thick. They are divided into:

• The table is professional. The legs are made of a round or square stainless steel pipe, and from the bottom is a solid shelf, which serves as an additional working surface, is used for temporary storage of dishes, food, etc.
• Table cutting. The legs of it are made of galvanized corner, and instead of the shelf there is a lattice.
• Production tables with board. One of the 4 sides of the table has a side, which it is attached to the wall - thanks to this nothing spills over the edge.
• Tables without side. Used as island modules, which put in the center of the room. Due to the lack of sides to them you can approach from either side.

Production tables "Atesi" (Russia)

The most popular brand on the territory of Russia, which deals with the complex equipment of points of catering. Their assortment includes thermal and neutral equipment. It is worth noting the tables, which are presented in both cutting and professional execution. Regardless of the model, their height is 870 mm. There are the following table sizes: length - 600, 950, 1200, 1500, 1800 mm; Depth - 600, 700, 800 mm. All these indicators are combined, forming a variety of models. Also distinguish:

• The table is made for cutting - it is labeled by the company "Atesi" as SR. The presence of the figure 3 before the dimensions indicates that it is equipped with a board. For example: SR 3/1500/700 - a table with a board measuring 1500 x 700 mm. The foot is made of galvanized corner.
• The professional production table is marked by the company "Atesi" as a joint venture. The presence of a 2 in front of the dimensions indicates that the product does not have a bead. For example: SP 2/1200/800 - a table without a board in the size 1200 х 800 mm. The leg is made of stainless pipe with a diameter of 4 cm.

The firm "Atesi" always provides certificates for its products with actual dates, which makes them the perfect suppliers of equipment for public facilities. The price policy of the brand allows you to sell tables in the price range from 4 to 20 000 rubles.

Production tables "Techno-TT" (Russia)

Less popular, but high-quality equipment. In addition to the models already mentioned in the paragraph above, the brand offers its customers:

• Corner tables with two sides;
• Tables with one closed side;
• Tables with three closed sides as an element of the module from which you can assemble the structure that you need;
• Closed tables with shelves;
• Tables with a side table for the confectioner;
• Fully enclosed production tables with sliding doors and drawers.

Equipment brand "Techno-TT" is considered quite expensive - for the table, depending on its variety, will have to pay from 10 to 30 thousand rubles.

Production table MXM (Russia)

The plant "Mariholodmash" (MXM) is engaged in the production of neutral and refrigeration equipment. Their products (a production table, a kitchen rack, a cantilever rack, etc.) are relatively inexpensive compared to the analogues listed above.

Yes, somewhere we had to neglect the quality of metal, somewhere - the quality of assembly, but for a small kitchen with a low degree of loading is an excellent option. The dimensions of the tables are the same as those of the "Atesi" equipment, while the price fluctuates from 3 to 12 thousand rubles per position. For example, for a production table with a board and a shelf measuring 1200 x 600 mm you will have to pay about 6 thousand rubles.