Polishing glass - tips and instructions

Every driver should follow his car very carefully. You can not ignore the auto glass, because they show who is behind the wheel. If they are not scratched and damaged, it immediately shows that a person cares about his car, pays her due attention, and he cares about what to ride. Polishing of car windows is quite a complicated process, but without it no car will look presentable. In addition, the procedure can be performed with your own hands, if the degree of damage is not very large.

Most often, defects can be removed only partially, because The process itself is very laborious. Polishing glass involves the use of tools such as polishing and diamond sheets, polishing wheels, as well as abrasive materials (sheet). The technology of recovery can be different, it directly depends on the place where the defects are located, and the type of glass. In some cases, it is not possible to clean at all.

Polishing car scratches will help in eliminating shallow defects. This method is suitable for you if you want to remove a layer that does not exceed one micron. In this case, use a paste with a low level of granularity.

There is another way that will help to remove deeper damage - photopolymer. It will help, if the scratches reach three hundred microns, here manual work is already powerless. Using these methods, you can remove 80% of scratches from the windows of your car. Well, if the lesions are very deep and exceed 300 microns, then grinding is necessary. Most often this process is carried out manually, but if the area of the glass is large, then you can use an electric typewriter for polishing.

Glass polishing. Basic Materials

• Pasta, which contains boron carbide.
• Emery paper (sandpaper).
• Pasta with the presence of boron nitride. It is important to correctly choose the grain size of the material to remove the desired layer.

Usually polishing the glass takes no more than four hours. If you need to remove a thick layer, then the process is divided into several stages. It is important to remember that each subsequent stage must reduce the level of granularity. Since there is a big chance to spoil the glass, the process must be performed as carefully as possible.

Stages of polishing

• Prepare to process the glass. To do this, thoroughly wash it, in addition, close the body with a special protective film.
• Only the polishing of the glass remained. Apply a special chemical to the polishing disc and start work. Remember that every next approach needs to reduce the abrasiveness of the paste. It is important to know that the last step should be done manually, without the use of electric machines.
• Rinse the surface of the glass thoroughly.

Thanks to this technology you can achieve really good results. If the process is performed correctly, the old, scratched glass can eventually take on a pleasant appearance. The main thing to remember is that glass is a fragile substance that can be easily broken if you do not follow the rules. When using an electronic machine, you need to distinguish your forces evenly, so as not to damage the surface.