Mounting foam "Titan 65": technical specifications

Mounting foam "Titan 65" is a one-component polyurethane mixture, which is intended for installation of building materials and sealing. It shows high ability to adhere to materials by type:

• Bricks;
• Plasters;
• Concrete;
• Wood;
• Metals;
• Glass;
• Styropore;
• Rigid, as well as solid PVC.

Among its features: high heat-insulating sound attenuating ability, resistance to aging, as well as the emergence and further development of fungi and mold. The application of the composition is carried out with the help of a gun, which guarantees the speed of the dosage and the high accuracy of the work.

Economical

As practice shows, the foam output is very economical. Thanks to the use of a new generation of components and high extensibility, it has been possible to achieve significant foam performance. From one cylinder, the volume of which is 750 ml, you can get 40% more material. If we talk about specific figures, we are talking about 60 liters of foam with free foaming and 100 running meters of cracks. In the latter case, the area of the slits can reach 5 cm ² . If you are interested in the length of the slots, then you can count on 170 running meters. In this case, the gap can make up 3 cm ² .

Specifications

Foam "Titan 65", the technical characteristics of which should interest you, if you intend to use the material during the work, has in the composition propane-butane and diphenylmethane diisocyanate, while the color of the material is light yellow. Work with this material can be done at a temperature range of +5 to +30 ° C, while the minimum temperature can be 0 ° C. You can count on the hardening time, which will be reached as much as 12 minutes. While the minimum setting value is 8 minutes, during this time it will reach dustiness. These values are correct if the ambient temperature is approximately 20 ° C, humidity - 60%.

Foam mounting «Titan», technical characteristics, GOST which will be of interest not only for professionals, but also for private consumers, is characterized by pre-treatment time, which is limited to 45 minutes, while humidity can be 93%. Full hardening is to be expected in a day, thermal stability will be achieved after the end of the hardening phase, for which it is necessary to maintain the temperature in the range from -60 to +100 ° C.

You may also be interested in the density of the material, which is 25 kg / m ³ , or 0.025 g / cm ³ . The stability of the dimensions, or more precisely, the shrinkage is less than 3%, while the temperature can be +40 ° C, and the humidity can reach 95%, this stage lasts for 24 hours. The material can absorb water in an amount of 1.5%, the maximum absorbency of the foam will reach in 24 hours. The compressive strength and tensile strength of this construction foam is 0.07 and 0.22 MPa, respectively.

Before buying, consumers most often pay attention to the coefficient of thermal conductivity, in the described case it is 0.036 Watt / mCal. Acetone can be used as the solvent, but it will act only before the beginning of the hardening stage. In order to calculate the required amount of material, it is important to pay attention to the performance characteristic, it is 65 l or 750 ml. If you want to use foam in structures that are exposed to a flame, it is necessary to familiarize yourself with the flammability characteristics: B3 (DIN 4102), and B2 (DIN 4102).

Basic properties

Foam mounting «Titan», GOST of which is observed during manufacture and looks like 22695-77, should be used only after full familiarization with the basic properties. Thus, polyurethane is used as the base for production, and the material itself has a specific smell during the solidification stage. Then, after the completion of this process, the odor of the material does not emit.

In the course of work, the ambient temperature can be about 20 ° C, it is not necessary to deviate too much from the set value. The application should be carried out at a temperature not lower than -10 ° C. You can count on the fact that the foam will remain heat-resistant for a fairly wide range of temperatures, which vary from -55 to +90 ° C. According to DIN 52451, according to which the production is being carried out, the change in the foam volume can be about 20%. But the tensile elasticity is 10%. The maximum width of the gap to be filled can be 30 mm.

Recommendations for use

Foam mounting "Titan", GOST, which is complied with when manufacturing and carrying out works, should be used according to the manufacturer's instructions. Before starting work, the surface is cleaned and abundantly wetted with water, and the foam cylinder must be naturally brought to room temperature. Before use, it should be shaken about 20 times, which is required to mix the components.

The protective cap is removed and the balloon attached to the gun. During use, it must be kept upside down. When the "Titan" foam is used, you can adjust the volume of the extruded foam, it is controlled by the intensity of the pressure on the handle of the nozzle or gun.

Slots should be filled to half the depth, as the material will increase the volume after completion of the work. If you work with slots, the width of which is more than 5 cm, then fill them gradually, and the material is applied in layers.

Advice from a specialist

Mounting foam "Titan" after use must be cleaned with a gun immediately, for this you need to use a cleaner for guns. After the foam has hardened, it can be cut off, but the surface on which the material was applied should be protected from exposure to ultraviolet light, covered with sealant, plaster or paint.

Conclusion

Mounting foam "Titan" after hardening can be removed only mechanically, and before the solidification phase, acetone or a special cleaning agent of the same manufacturer can be used as the solvent.