Lightning broke: how to fix it at home?

It is difficult to imagine clothes without a favorite zipper. She has many positive features: reliability, compactness, beautiful appearance and much more. It is used in the manufacture of jackets, coats, jeans, skirts, dresses, bags, purses, shoes and other necessary things. If the lightning broke up, how to fix it yourself and quickly - this is the first thought that comes to mind.

Sometimes a buckle can bring a bunch of inconveniences, since it has one feature - to break when the least of all is expected. And then the search for information begins, which will help to correct the situation. Lightning broke up: how to fix it? First of all, it is necessary to understand the reasons for the breakdown. In some cases, it breaks down, because the maximum period of use is exhausted. Sometimes a new lightning just tears. In this case, it is unlikely to be repaired.

Lightning diverges: repair

If the lightning has dispersed, how to fix it, we will tell in the article. If this unpleasant phenomenon happens, then it is not necessary to flee to the workshop and change it for a minute. First, tap the hammer on both sides of the zipper. Blows should be easy, so as not to disrupt the overall integrity of the product.

After this, use pliers to press the paw on both sides. This will allow you to make a gap less - the zipper will fasten more when fastening. Such manipulation can be carried out only once. Since when you repeatedly squeeze the pliers dog will just fall apart. Therefore, if you already pressed the dog, prepare the runner in advance, just in case.

List of possible breakdowns of lightning

Let's say you have a problem: the plastic lightning is not moving. How to fix this clasp? For this, the following procedure should be carried out. To start, you need a solution of rosin, which need to miss the zipper. Plastic fasteners are more confirmed by breakage. Therefore, require careful attitude of the owner.

If suddenly a plastic zipper pops out of the plastic, then a few stitches of a fishing line should be made at that place. Such repairs for a while will postpone a complete replacement of the lightning. If it constantly diverges, while it is very difficult to properly fasten, then, most likely, you need to replace the slider itself. To do this, you need to choose a part of the appropriate size. If there is any figure on the inside, then it is much easier. This value corresponds to a certain size. If suddenly the lightning detaches from the base, then it can be repaired simply by sewing with machine thread.

Prevention measures for lightning

That lightning served us for a long time, it is sometimes necessary to clean them with an old toothbrush. After that, along the entire length of the fastener should be carried a candle made of wax or paraffin. Never use additional force to open and close the zipper. This will not speed up the fastening, but only bring the time to break. If suddenly there was lightning on the backpack, how to fix it, you now know. After all, these tips are applicable not only for clothing, but for other products.

Where do lightning fail most often?

The most popular clothing, which often disperse lightning, are the pants. To fix a divergent zipper on jeans is easy and simple. If the slider is unfastened unintentionally, then a tab made of any tape must be attached to the tongue. When fastening it must be put on the button, and then zip up the jeans. So it will perform its direct function. In this case, the tape will not be visible at all.

If the tongue itself is lost from the slider, it can easily replace the usual clerical clip. Fishermen always have in stock clockwork rings that will also fit. Just attach it to the bottom of the runner - and you can use the thing further. If the tongue is lost in a less prominent place, a simple threaded thick thread will do.

If the base is damaged, and the lightning went off, how to fix it? You do not need to ask about this. The answer is simple - you should apply any colorless varnish to the damage site and wait until it dries. After that, slowly try to fasten. If everything turned out, that's fine. If it does not work, you need to repeat the procedure again.

Thanks to the above simple methods, you can quickly and independently manage to cope with the failure. After all, how much you take care of, and everyday use of a thing leads to its wear and tear.