Light electric saw for a summer residence: the review, characteristics, kinds and responses of owners

How to choose a chain saw for a dacha or a house? Many people try to pick up compact models that weigh a little. All this will allow us to deal with sawing wood without any problems and not to apply great physical efforts. Electric motors for compact models, as a rule, are installed with a power of no more than 5 kW. However, in this situation, much depends on the manufacturer. Also note the type of saw.

Types of saws

To date, the shops are mainly chain saws. They are not particularly compact, but they have a very high power parameter. If we consider circulating saws, then they are considered small-sized and in use are fairly simple. Another type of saw is the jigsaw modification. By the performance parameter, they are very different. However, it should be noted that for cutting large boards they do not fit uniquely.

If we talk about saber modifications, there are very few compact models on the market. On average, the power parameter in them fluctuates around 7 kW. In turn, the maximum frequency of the instrument is located at 55 Hz. The last type of saw is considered to be an electric hammer. By design, they are quite similar to the saber modifications, but the tires they use are wide. Thus, for cutting large boards they can be applied.

Circulation Saws: how to choose

Many companies presently offer buyers high-quality models. However, all the saws do not fit all the saws. First of all, you should pay attention to the engine power. On average, it should be 4 kW at a working frequency of 55 Hz. All this will ensure good performance. The diameter of the saw blade, ultimately, will affect the depth of cut. In this case, one should approach the choice individually. If you select a universal model, then the saw blade in diameter should be 25 cm. Reducers in such devices are often installed worm-type. If we talk about shortcomings, it is important to note the absence of a restraint. This type of electric saw is sold for a dacha (light) in St. Petersburg for about 9 thousand rubles.

Secrets of choosing a chain model

How to choose the right chain saw for the dacha? Devices of this type in our time are quite common. First of all, when choosing a model, you should pay attention to the bus. The thickness of it must be at least 2.5 mm. All this will ensure good performance. It is also important to assess the power of the electric motor. On average, this parameter fluctuates around 7 kW at an operating frequency of 60 Hz.

Depth limiters for such saws are absent. For accurate cutting wood models are not suitable. It is also important to note that they are quite different in type of gearboxes. Some modifications are equipped with chain catchers. It is an average lightweight electric saw for a dacha in the store of about 7 thousand rubles.

Jig saw type

How to choose a power saw for wood? Which is better and why? A distinctive feature of the models of this type was considered to be the presence of a small saw section. These devices can work with wood, the thickness of which does not exceed 3 cm. It should also be noted that the power of the models does not exceed 4 kW at an operating frequency of 45 Hz. Protective visors for instruments of this type are absent. However, it should be noted that they are very cheap in the market. On average, the user can buy a saw for 6 thousand rubles.

How to choose a saber saw?

At once it should be noted that models of this type are mainly used for work in hard-to-reach places. Saw tires in devices are used in different thicknesses. Speaking about the parameters, the power of the models reaches a maximum of 6 kW at a working frequency of 55 Hz. To work at the dacha this is enough. Depth limiters in devices of this type are absent. Reducers are usually mounted worm gear. In some cases, electric starters are used. It is an average modification in the store about 9 thousand rubles.

Choosing the Hammer Knife

When buying an electric hammer, pay attention to the width of the saw blade. On average, it is equal to 3.5 cm. For a comfortable sawing of wood this is quite enough. Various controllers are used to control the power of the instruments. As a rule, for saws of this type they are rotary. Electric motors for models are installed only asynchronous. Their power ranges from 4 to 8 kW at a working frequency of 55 Hz. If we talk about the cost, then the model of a good manufacturer will cost the buyer about 8 thousand rubles.

Saw "Bosch GK 150"

If you believe the reviews of consumers, then this light electric saw for the villa can boast a high clock speed. In use it is quite simple. The brake system for this modification is of a chain type. According to many owners, the engine in the device breaks very rarely.

Speaking about the parameters, the power of the model reaches 5.2 kW at an operating frequency of 45 Hz. The starter in the device is of a manual type. The rotor is half-closed. The carriage is not used for this model. For sale is presented the electric saw for a summer residence (easy) in "Leroy Merlin" for 8 thousand rbl.

Reviews about the model "Bosch KC 190"

In inaccessible places, this electric saw for the dacha (light) shows itself well. For women, it fits well, because it is not necessary to apply large physical effort during its operation. In this case, the saw blade is of a steel type. If you believe the reviews of buyers, then problems with the asynchronous motor are rare.

The model deserves special attention. On each side it is corrugated, so it lies comfortably in the hand. Directly the rotor is used as a standard semi-open type. The starter in the device is used manually. In service, the model is simple. A protective carriage for this saw is available. In stores, it is sold at a price of 12 thousand rubles.

Overview of the saw "Bosch COP 150"

This light electric saw for the dacha is equipped with a very strong saw blade. However, if you believe the opinion of experts, then with performance, the model has serious problems. The electric motor in the device is two-stroke type, and it works at a frequency of 55 Hz. The housing for protection of the reducer is available in the model. Also to the strong points is a quality pen. The depth stopper in this case is available. For safe operation of the tool, the manufacturer provides a base plate. It is worth on the market is quite expensive this electric saw for the dacha (light). Prices for it start from 10 thousand rubles.

Opinion about the model "Fort TS100"

This saw is equipped with a powerful asynchronous motor. Of the features of the model should be mentioned about a quality starter. The cooling system is air-cooled. If you believe the reviews of consumers, then the damper is very rare. At an angle with this model you can work. This device also makes it easy to control the angle of the cut. A lining is provided for the flange by the manufacturer. Thus, the rotor of the model does not wear out quickly. It is worth a specified saw in the area of 9500 rubles.

Features of the Forte TC 200

The presented light electric saw for a dacha is excellent for work in hard-to-reach places. With this model, the boards can be sawed to a thickness of up to 4.5 cm. In this case, the braking system is a stepped type. If you talk about customer reviews, many owners appreciate the saw for high power. However, it should be taken into account that the saw blade of the model is of small diameter. The blocking device in the presented saw is installed as usual. The maximum speed of the electric motor is gaining quite quickly.

The power rating of the device is 5.6 kW at a working frequency of 58 Hz. In this case, the ventilation ducts for cooling the engine are located at the rear of the structure. The reducer itself has a worm-type. If you believe the reviews of buyers, then for cutting at an angle this model does not fit very well. However, the depth limiter of the power tool is available. Thus, for precise cuts it can be used. In the market this saw is sold at a price of 8 thousand rubles.

Description and reviews of "Fort TS300"

Reviews this power saw for the country (easy) from the buyers receives different. Some owners believe that the device is great for longitudinal sawing boards. Directly the tire on the model is fixed to the lock. She has a protective visor that is reliable. The electric motor is provided by the manufacturer asynchronous type, and its power reaches a maximum of 6.9 kW. In this case, the operating frequency of the instrument is 60 Hz.

The model operates from the 220 V mains . A protective casing is available at the reducer. Also of the features should be noted a quality carriage. With the stabilization of this saw, problems are rare. However, shortcomings, according to the owners, still there. First of all, it is important to note a fairly low handle. To some it seems not convenient. As a result, it is impossible to control the tool during cutting. The spindle in this sample is erased often. It is also important to mention the rapid wear of the tire. To avoid damage to the gear unit, you should periodically clean it. Despite all the shortcomings, the model is in great demand. In the market it can be bought for 10 500 rubles.

Features of the saw "Makita LS1018L"

The specified electric saw for a summer residence (easy) for high productivity responses receives good. For longitudinal sawing the model can be used. The handle is comfortable, so it's very easy to handle with a saw. The depth limiter is in this case. The electric motor of the asynchronous type is designed for a maximum power of 5.6 kW at a frequency of 55 Hz.

If you believe the opinion of the owners, then problems with the starter in the device are rare. The rotor of the tool is of the semi-closed type, and the protective casing is there. At an angle, it is allowed to make a sawing by the said device. Find in the store this saw can be for 7 thousand rubles.

Description of the device "Makita LS1020"

Many customers this saw is very appreciated. First of all, it is important to mention the qualitative asynchronous motor, which is operated at a frequency of 60 Hz. The rotor of the model is installed in an open type, however it has a protective casing. There is no depth stop in this case.

If necessary, longitudinal cuts of wood can be done. However, it is very uncomfortable to work at an angle with this tool. For operation in hard-to-reach places it does not fit. The limiting power of the model reaches 6.2 kW at a frequency of 60 Hz. You can drill a saw for 8 thousand rubles.

Description and reviews of the model "Makita LS1030"

This saw has many advantages. In this case, the protective casing on the rotor is provided. The motor is standardly used asynchronous type, however it is installed with a reliable protection system. All this helps to avoid frequent overheating. If you believe the feedback of customers, then the problems with the bus are rare. However, the starter breaks periodically.

It is also important to mention that the regulator in the presented saw is very simple to twist, so you should be careful when using the tool. If we talk about the parameters, the power of the model is at the level of 6.2 kW, and the frequency reaches as much as 50 Hz. Buy this saw user can for 9 thousand rubles.