HomelinessTools and equipment

Inverter heaters: advantages, features, reviews, prices

With the advent of cold pores, each owner of his own home reflects on how to warm up in severe frosts, and also how to make living more comfortable. Modern industry develops and creates many different devices and devices for this, and models are constantly being modernized. Not so long ago in the shelves of the corresponding goods appeared inverter heaters.

Popularity

Such heaters quickly gained popularity and wide distribution, as modern customers are important in significant performance and economy. Manufacturing companies are increasingly introducing new systems that can meet the above requirements. Thus, inverter heaters have been designed and manufactured. They differ in the principle of action, but they share common positive characteristics.

general description

This kind of device has a built-in inverter that converts the alternating current into a constant one, while the voltage and frequency change. In physics, this process is called inverting. The devices described are generators with periodic voltage. They are close in shape to a discrete signal or a sinusoid. This process significantly affects the capacity of the unit. Due to this, electrical devices at operation show noiselessness and economy.

Main advantages

Inverter heaters have many advantages, among them there is a special mode of operation. Due to the fact that the system has an inverter, after reaching a certain temperature the mechanism does not turn off, but continues to function at less impressive speeds. At the same time, a favorable microclimate is maintained in the room. The device does not expend energy on the processes of switching off and on. Inverter heaters, reviews about which you can read in the article, should be purchased only after a thorough study of the quality characteristics of the equipment.

When using an inverter, there is no concept of high current during start-up. When starting, the current is not above the rated current, which favorably affects the life of the device. Inverter heaters due to the qualities described above do not need to be switched off and on constantly. These cycles reduce the operating time of the device. Energy savings range from 30 to 50% if compared to conventional devices.

Reviews about performance and usability

The wall heater of the inverter type is distinguished by its practicality and high efficiency. The unit is able to heat at low temperatures, demonstrating high performance. The device shows the ratio of heat produced in the course of work to the energy expended. This figure is 4. This fact indicates that with an expenditure of 250 watts it will be possible to get more kilowatts of heat. According to consumers, this is a very good indicator.

Safety reviews and low noise levels

The inverter-type wall heater is environmentally friendly when used and safe. The modern consumer emphasizes that in operation such units have a low noise level due to the fact that the rotational speed of the compressor during operation is reduced, because the load is incomplete. This has a positive effect on people who are in the room.

Negative moment

Economical heaters of inverter type are very popular today. Consumers note, however, that this device has a high cost. Sometimes it forces customers to make their choice in favor of other equipment. However, it is worth considering that the unit is able to justify itself in a fairly short time.

Inverter Heater Features

At present, a huge number of heaters are on the market. Among the most common, we can distinguish an inverter variety that works on liquefied and natural gas. These units are used to maintain the most comfortable temperature in open areas and in country cottages. The device is characterized by an impressive supply of heat, which is accompanied by low fuel costs when heating large areas. Economical heaters of the inverter type are mobile devices that are easy to handle and allow them to cope with them even for those who do not have professional skills.

Quite often the consumer also uses infrared inverter heaters. They are used for heating residential and utility premises. These devices are characterized by resistance to moisture and rain, so these units are convenient to use for heating dachas and verandas. Recently, instruments of this type have found their application in the installation of heating systems that operate on electricity. About them you can read a lot of positive feedback. Such equipment can function in places where there is access to electricity.

When using inverter heating, the owners will not need to make out the documents, as well as take a permit for installing the heating system. The most pleasant factor for the consumer is that the cost of the equipment is lower in comparison with other heating systems. If you decide to buy a gas inverter heater, then it can form the basis of heating, with this equipment you can replace the gas boiler. The operation of the system using such a device will consist in the fact that the electric energy entering the boiler will pass through the heater. Inverter boiler will produce induction current. If there is a situation where the electricity is turned off, the boiler can continue to function from the battery. The heater has two parts, namely a heat exchanger and a magnetic element.

Comparison of inverter heater with conventional

If we consider the air conditioner, which is equipped with an inverter, so that it is deprived, then it can be noted that the operation of the heat pump is based on the first one . There are two blocks in its composition, one of which is internal, and the other is external. In the first unit there is a heat exchanger in which, under the influence of an impressive pressure, freon is condensed. At the same temperature reaches a mark of +80 degrees. Freon in the liquid state is transported to the second unit, where the pressure is at a lower level. As a result of the pressure drop, Freon migrates to the gaseous state from the liquid. Thus, the inverter electric heater operates according to a simple principle. It is highly ecological for the reason that its operation is not accompanied by the combustion of any kind of fuel, as well as the release of harmful substances into the environment.

If we compare a similar model with a conventional model that lacks an inverter, then we can see a number of differences. If you choose the right product, it will be able to maintain the temperature inside the room in the range from +20 to -22 degrees. In this case, the temperature can be kept from +30 to -35 degrees. If the outside is not too hot weather, then the capacity of the equipment will not be changed, since the compressor is characterized by the installed capacity.

To accurately maintain the temperature of the unit, it is necessary that the cooling power is changed. This question is solved quite simply. At the moment when the product is started, the thermoregulation sensor monitors the air temperature in the room. When the temperature changes to a mark of 2 in the downward direction, the compressor will be turned off automatically. In this case, the fan located in the indoor unit will continue to function, for this reason the compressor shutdown will not be too noticeable, only the temperature rise may strike the eye.

When the mark is raised 2 degrees higher than the set value, the compressor is turned on again, after which the whole cycle will be repeated many times. As a significant disadvantage of this technology are large fluctuations in temperatures inside the room. This is because for precise control, there is a need to switch the compressor on and off. This can cause a breakdown or difficulty in working.

Additional positive features

If you decide to choose an inverter heater with a thermostat, you can get equipment that saves an impressive amount of electricity. Due to the special technical characteristics of the power network wires are almost not heated. One can not but note the absence of reactive current components, which is accompanied by minimization of power factor losses. The unit is equipped with heating elements that passively refer to oxygen.

Negative Features

Inverter heaters for home have some drawbacks. Among them, one can identify the presence of complex electrical circuits, which are located in the indoor unit. This increases the sensitivity of the unit to the differences that occur in the network. The device has electronic mechanisms that exclude the possibility of turning on the compressor at a temperature of -11 degrees and below. If the temperature of the environment has risen above +42 degrees, then the compressor can not be turned on either. The devices have non-standard spare parts, which is why if you need repair, you may experience some difficulties, for example, a long period of work.

Cost

Inverter heaters, the price of which varies between 10-20 thousand rubles, justify their value in the first months of operation. In support of this belief, there are customer testimonials that must certainly influence your decision. Among the most popular brands are Ballu, Frico and Elara.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.