Automobiles, Cars
Injector flushing fluid: description, features, types, reviews
A person buys a car and thinks that he will serve for a very long time. Naturally, the car owner knows that it is necessary to look after him and serve the responsible units. But even fully-serviced equipment starts to malfunction - jerks are felt during the movement, dips appear when the accelerator pedal is depressed, the acceleration is completely different, fuel consumption makes you literally shed tears. And at the same time everything is quite normal with the car - the "Check engine" light on the instrument panel is not lit, there are no oil leaks in the engine compartment. What is the reason?
Why do jets jam
Gasoline is a non-uniform liquid. It is a mixture of light and heavy hydrocarbon particles. Naturally, light fractions burn better and faster. Heavy particles burn much longer, and as a result - carbon on the elements of the motor. But besides hydrocarbons, gasolines contain other substances. These are various resins, impurities, additives and other additives. It is these substances that, as they move through the intake tract, clog up everything they deal with. And here if in the fuel mains these deposits do not lead to anything special, then in the hot power unit the cylinders, the piston group, and also the nozzles suffer.
Symptoms of contaminated injectors on injection engines
Hence the problem faced by car owners - increased fuel consumption. The ECU tries to compensate for poor combustion by the amount of feed. There is also a decrease in dynamics and dips. The fuel burns non-uniformly, thus the necessary characteristics for the engine are not provided. How to fix the situation? There are two possible ways here: to purchase special fluids for washing injectors or to use ultrasound.
Ultrasonic processing
This decision is very impressive, but there are a few problems. The first thing to remember is that ultrasonic cleaning is only allowed by injectors. The remaining parts of the fuel system can not be cleaned in this way. And this method does not always work. For example, ultrasound cleaning is contraindicated in nozzles with ceramic parts. The fact is that this material is destroyed when exposed to ultrasound. Ceramic nozzles can be found on vehicles with a direct injection system.
Flushing the injector through the fuel rail
Thus, a special tube is attached to the ramp, under which a liquid is injected under sufficient pressure to flush the injector. But you can do all this only with professional equipment. Only a high-quality liquid is used to flush the injector. The price of such a procedure is quite high. The advantage of this option is that you do not need to remove the injectors, but you have to dismantle the fuel line and replace the candles.
Self-washing
This is the third option. Here, liquid is purchased to flush the injector into the tank. The disadvantage of this method: the drugs do not cope with serious pollution and are suitable only for preventive work on new machines. But the modern car chemistry market offers effective compounds that help give the motor a second wind.
Classification of liquids for cleaning power systems
The liquid for washing the injector, which is produced by modern manufacturers, can be divided into two main types. The first is a drug that directly affects all elements of the injector. These mixtures are injected directly into the injector or any suitable container. The second type is various additives that need to be cleaned by the injector. They are poured into the tank of the car.
Wynns Injector Wash Fluid: Quality and Warranty
That's how the manufacturer gives this drug. Experts argue that this tool is no less effective than expensive Japanese liquids. This mixture is made in Belgium. The company has been on the market for more than five years. Among the main advantages of the Belgian drug is the formulation, which uses a variety of strong solvents. Due to the fact that the manufacturer has worked very carefully on the composition, the washing liquids for the Wynns injector start to work from the first minutes. Almost immediately, reactions are triggered, during which the drug dissolves any impurities, regardless of their thickness. Among the main characteristics can be distinguished quality of cleaning not only the injector, but also valve seats, parts of the piston system, combustion chambers. Advantage is the lack of the need to dismantle these parts.
How to work with liquids Wynns
The first thing you need to start the engine, then get the fuse for the gasoline pump - so the pressure in the fuel system is released. Further from the injectors disconnect the terminals, as well as the fuel supply hoses. Then dismantle the fuel rail and O-rings.
How to make a washing liquid with your own hands
Many car owners are confident that you can make an effective liquid for washing the injector yourself. Yes, indeed, there is an opinion that the injector can be cleaned with means for washing carburettors. In this case, you do not have to visit the service station and pay for an expensive procedure. However, in the case of using "handicraft" drugs, there is an option that the engine will not recover.
Summary
You can clean the injector yourself in the garage, using a self-prepared preparation or a factory mix. Each owner is free to choose how to care for the car on his own. But experts recommend using the services of professionals.
So, we found out how you can clean the injector of the car with your hands by rinsing. вещества могут ухудшить дальнейшую работу двигателя из-за некорректного впрыска топлива. Carry out such manipulations are often not recommended, since aggressive substances can worsen the further operation of the engine due to incorrect injection of fuel.
Similar articles
Trending Now