HP Pavilion dv6 Notebook: How to disassemble it for cleaning

If you purchased a HP Pavilion dv6 laptop, how to disassemble this miracle of technology, you need to know necessarily. This machine is quite powerful, has high characteristics, it is equipped with a strong video card and all the latest achievements of computer technology. Notebook HP Pavilion dv6 is designed for office work, and for installing special programs for working with images and video, as well as for games of any complexity. It withstands heavy loads, therefore requires cleaning every six months to prevent overheating of the cooler and contamination of internal parts.

Carry the HP Pavilion dv6 laptop in the workshop or clean it yourself?

There are only three basic operations that the HP Pavilion dv6 laptop allows: repair, replacement of parts and cleaning. Repair of the machine, no doubt, should be handled by a specialist. But the remaining two procedures are quite possible at home in your own performance.

You can, of course, use the services of a repair shop and twice a year to part with your favorite equipment for a week. But it's better to master disassembly of the HP Pavilion dv6 laptop at home. With a developed skill, this will take you along with cleaning for about an hour.

Preparing the HP Pavilion dv6 laptop for disassembly

Before disassembling the HP Pavilion dv6 laptop, disconnect the charger, modem, flash drive, headphones, and other accessories. Make sure it is completely turned off. Wipe the surface of the laptop with a special cloth to prevent dust from entering the internal components. Close the lid of the notebook and place the back cover up in front of it.

In advance, prepare small containers for the bolts that you will twist from the laptop. Each species must be put in a separate place, so as not to confuse.

How to start disassembling HP Pavilion dv6 laptop?

So, in front of you on a soft surface (to protect the case from scratches during operation) is the HP Pavilion dv6 laptop. How to disassemble?

First, remove the battery and unscrew the screws below it. Remove the top cover in the form of an inverted "g", picking it up with a special tool or screwdriver with a straight tip. Do not use a knife and other sharp objects to analyze the notebook: you risk damaging the parts, cutting the cable or cable. On some models, the cover is fixed with screws that do not need to be removed when disassembling. There may also be two separate covers for the hard drive and memory cards.

We take out the hard drive, Wi-Fi, DVD drive and memory card

To remove a hard disk, you need:
• Unscrew the four screws that secure it;
• get the hard drive;
• Pull the black tab up and disconnect the hard drive cable.

After removing the hard disk, unscrew the right upper bolt under it and carefully disconnect the speaker wiring. Then unfasten the DVD drive cable. Unscrew the last bolt attaching the DVD drive to the motherboard, and remove the drive from the front.

To remove the Wi-Fi module, it is necessary to unfasten the two cables (black and white), remove the two screws and remove the module.

If you do not need to replace the memory cards , but the HP Pavilion dv6 laptop is being cleaned regularly, you can leave the memory modules on the motherboard. When replacing memory cards, the operations are carried out in the same sequence as with Wi-Fi: the cable is loosened, the mounting screws are loosened, the memory card is removed.

Disconnect the keyboard from the laptop

How to disassemble the HP Pavilion dv6 laptop next? You need to remove the keyboard.
• Remove all bolts remaining on the body.
• Remove the back cover completely.
• Unscrew the bolts securing the keyboard (usually 4).
• Turn the laptop over and open the lid.
• Lift the panel above the keyboard, trying not to touch the trails coming from it to the motherboard.
• Gently press the keyboard block and pull it out with the upper rib on yourself, pushing from behind, from the side of the DVD drive. The lower edge should remain in its previous position.
• On some models, you need to unscrew the additional three screws below the keyboard.
• Unfasten the keyboard cable. First, gently move the latch so it looks up, then slowly pull out the cable.

Remove the front panel

Before you laptop HP Pavilion dv6. How to disassemble the accessories under the front panel?

First disconnect the power and touchpad plaits from the motherboard. In some laptops in this series there is also a loop of the fingerprint scanner. They are not fixed by latches, so they need to be pulled out slowly enough from the nests. Then unscrew all the bolts along the perimeter of the front panel.

Remove the front panel, detaching it from the back with a special tool or screwdriver with a straight tip. You can use an ordinary plastic card. In some models, the front panel is divided into two parts, first removing the top part (above the keyboard).

Disconnect the cables from the motherboard

Disassembly of the HP Pavilion dv6 laptop at this stage is reduced to "manual work" - disconnecting the cables and cables from various devices. It is best to disconnect them in the following sequence:
• Loop from the USB module;
• Loop from the speakers (in some models);
• plume from the matrix;
• Loop from web-camera;
• Remove the metal panel.

How to remove the display panel of the HP Pavilion dv6 laptop?

Using HP Pavilion dv6 laptop, how to disassemble it to the last screw, it is not necessary to know at all. But sometimes you need to remove the display panel. This is a very delicate and responsible job, so it is not recommended to do it at home without the utmost necessity.

First you need to remove the wireless network card, having previously disconnected from it two antenna cables. Then, the antenna cables and the video cable are disconnected from the motherboard. Antenna cables are pulled down, behind the back panel. And the video cable goes up for a special black label. It remains to unscrew the bolts securing the monitor and remove it.

How to replace the power supply and clean or replace the cooler in the HP Pavilion dv6 laptop?

The power supply in the HP Pavilion dv6 laptop is not soldered to the motherboard, so replacing it is fairly easy. It is necessary to disconnect its connector from the wires and remove the unit.

So we reached the climax in the article on how to disassemble the HP Pavilion dv6 laptop. It remains for us to unscrew the last screw that secures the motherboard to the back panel. Then in two stages we remove the motherboard: first lift it to the right, disconnect the power cable, then remove it completely.
Unscrew the two screws holding the fan, and unfasten its loop. More advanced models of the line of notebooks HP Pavilion dv6 have a special cooling system, it is fixed by eight screws.

When disassembling the laptop, even without apparent need, it is necessary to replace the thermal grease on the cooling system and use silicone grease for the fan.

So we reviewed how to disassemble the HP Pavilion laptop. To return the laptop to its previous form, you just need to repeat all the done operations in the reverse order. It will be nice if, during assembly, you clean each part of the dust with a special soft brush.

Carefully monitor the sequence of actions. Check if all the cables you connected and properly fixed. Watch for the presence of all fixtures. If you do everything right, the next six months you are guaranteed stable operation of the notebook without noise and overheating.

About laptop

The problems were sorted out (disassembling the HP Pavilion dv6 laptop is done), and as a "dessert" we suggest that you discuss the advantages of the laptop, which we have already learned to disassemble. A distinctive feature of the dv6 notebook series is the excellent balance between price and quality. Special thanks should be given to the developers for the characteristics of multimedia: HD display, which received a diagonal of 15.6 inches with a 16: 9 format.

These laptops are suitable for deploying a variety of computer games on them. The case of dv6 looks like HDX16. If you do not take into account the difference in coverage, the apparatus consists of similar parts. If you continue the comparison, it should be noted that there is no silver keypad, with preference given to the relatively modest finish of the components.

If the constructive point of view is taken as a basis for comparison, significant changes are evident that touched the display. He got an anti-reflective coating, he does not have the entire laptop, but there is a nice edging that is made in gloss. The case is made of black plain plastic. Appearance greatly improves ornaments.

Such details are located correctly: usually on the lid, as well as the surface of the pad for hands. At the same time, the build quality is very good. Fuzzy connections of the body parts are completely absent. The port configuration is the same as the HDX16 model. The card reader is located separately, it can be found on the left, after the ExpressCard slot. So we figured out how to disassemble the laptop HP Pavilion dv6, and also discussed the features of this model.