How to turn on the tablet without the power button: step by step instructions, recommendations and feedback

On whatever operating system your tablet works, no matter what money you pay for it and how much you care for it, gadgets can break from time to time. It's one thing if the device broke down due to your fault, that is, dropped, drowned or something by carelessness was rubbed in the OS, and quite another, when one of the elements breaks down without seemingly obvious reasons.

One of these reasons is the power button of the gadget. Well, if the tablet at this time was turned on, and the failure can somehow fix the built-in software, but another thing, when the device is turned off, and to revive it without this button is a big problem.

Causes of breakdowns

Let's try to figure out how to turn on the tablet without the power button: recommendations, instructions and factors that can lead to this malfunction.

First, let's look at the main reasons why the gadget stopped turning on. There are a lot of such, but conditionally they can be divided into two groups: mechanical and software. That is, physical damage to the device or a failure in the operating system, respectively.

Mechanical damage

Before you turn on the tablet without the power button, carefully inspect the device case. The gadget may stop working if you drop it, for example. Most of the components of modern mobile devices are made of brittle materials and components, and to damage them, no special effort is required.

With a few exceptions, the tablet may fall on the power button. A bounce will easily cause damage to the boards, cracks on the chips, or rupture of connections. Can I turn on the tablet without the power button in this case? Probably not. The only option is to contact a nearby service center for the repair of mobile equipment, unless, of course, you are not seven-sided in the forehead and have not graduated from a technical university. But even the last argument does not always help, because as for the repair you will need a special tool - the usual screwdriver and pliers here just can not do.

Software failure

Before you turn on the tablet without the power button, it's not superfluous to make sure the operating system is adequate. Very often it happens that after installing third-party software from suspicious resources the platform behaves a bit strange and buggy. OS failure can also occur from an incorrectly delivered update.

At its core, the tablet is the same computer, only smaller and on its platform. Therefore, to catch a virus or "catch" the failure of the operating system can be without problems. In this case, the question of how to turn on the tablet without the power button is not so acute, as with mechanical damage, and you can solve the problem yourself, that is, without going to the service center.

We try to include the device

The functioning power button should not somehow bend, sink or "walk" in the groove. If the mechanism is broken, you will not hear a characteristic easy click - pay attention to this, before turning on the tablet without the power button. If the key is responsive and mechanical damage is not observed, then most likely the case is in the "brains" of the gadget. To solve this problem, you will have to be patient with a lot of patience.

First of all, open the instruction manual for your device and look for a section with a "hot" and "cold" start (Recovery section) for your device. Typically, this is the standard combination - the volume up with the clamped off key. The answer to this method is not very flattering, because in this case all the insides of the gadget are subjected to a strong "shake". If you can not enter the "Recovery" mode, then most likely you will have to contact the service center.

Recovery mode

Nevertheless, it is worth trying to revive the device with some other moves. Before you turn on the tablet without the power button, be sure that the loops and connectors that you use are "native", otherwise the probability of successful repairs will be significantly reduced.

1. If the battery is OK, you can connect the tablet to the charger. It is unlikely, but sometimes the device shows signs of life and starts up in the "Recovery".
2. Also, it's not a pity to try to connect the gadget to a personal computer or laptop via USB-interface. The device can understand this action as synchronization and include the appropriate protocols.
3. If by chance you have the "Debug by USB" mode enabled in the settings, then using the ADB developers' development environment, you can run the gadget through the computer interface (command line cmd.exe). Just type in the "adb reboot recovery" field, and then use the volume key on the device to select the "Reboot Device" item.

Judging by user feedback, most of the owners of these steps were able to help. If none of the methods has helped, then your way to the service center, and there they will already look at what happened to you and how to deal with it: rewiring the device, replacing some boards, connections or repairing the power button.

The tablet does not wake from sleep

In this situation, things are a bit simpler than in the previous case. Some very competent manufacturers complete their firmware with additional functionality for unlocking the screen with the help of touch-gestures.

In the operating instructions, the device must have appropriate information. Typically, this is a quick tap on the central part of the screen or a frequent flipping.

We deduce a device from "sleep"

If you do not have the necessary information in the manual, then before you turn on Android without the power button, try the following steps.

1. Connect the gadget to the charger. In most cases, the device exits sleep mode.
2. Connect the USB cable to the PC or laptop. Synchronization protocols must be enabled. Discard the connection with the computer and continue working tablet, disconnecting the USB cable.
3. You can try to perform a "coarse reload". Most gadgets are equipped with a small hole with a small button, which is located in the vicinity of the headset interfaces and volume rocker. Click on it with something sharp - and the device must reboot.
4. Also, some tablet models allow you to reboot yourself with a specific key combination ("Cold Start"). The combination is practically unchanged - the power button and the volume rocker up or down. Then we wait 10-15 seconds, and the device should start.
5. In the event that the device does not turn on because of an incorrectly supplied update or your intervention in the firmware, the only correct solution is to reflash the gadget. With a minimum of skills, this procedure can be performed independently, it is enough to study the detailed manual on a specialized forum.

These recommendations are suitable for devices running OS "Android" and "Windows". "Apple" gadgets have a somewhat different philosophy and specifics, but the principle of action is similar to the first. For example, to perform a "Cold Start" on iOS, you need to clamp not the volume of the volume with the power button, as in "Android", but the "Home" key.