How to sew jeans with the preservation of the seam - lessons of skill

Very often, when buying expensive jeans, we are faced with the problem of the discrepancy of their length to our growth. You can simply cut them and sew them, as they do with ordinary trousers, but then the whole look will be lost, because you have to cut the shabby edge of the leg with the finishing stitch. How to avoid it and sew jeans with keeping the seam? Let's figure it out!

How to sew jeans with preserving the seam, and what is needed for this? Firstly, during the fitting process we will need tailors' needles, threads in tone, scissors and a sewing machine.

There are two options for shortening jeans :

• To start, you will need a fitting, during which you need to measure the required length of the jeans. Next, on the intended label, draw a line and cut off the leg 0.5 cm below the line. After we take the cut piece and at a distance of 0.7 mm from the decorative stitch cut off the excess. Now the line is torn off and we remove all the threads, we combine the leg with the cut off band of scuffs and we spend 0.7 cm from the edge. We strip the seam and turn it down. After the seam is smoothed, it is necessary to make a lapel over the old folds and, having trimmed the slices into it, lay a new decorative stitch with a denim thread. Thus, all the abrasions will be preserved. The line, of course, should be machine, but if there is not one, then it will not be possible to sew the jeans by hand in this way. The minus of this method is a too coarse suture, especially on tight fabrics. And if the denim is thick, the seam will look like a cuff, which is pretty ugly and unnatural.
• The next way, how to sew jeans with keeping the seam, is not so laborious, but also requires accuracy and diligence. So, first we measure jeans and determine how long we need trousers. Above the mark by 2.5 cm we draw a line, turn out the trousers on the front side and, together with the line, attach the edge of the leg with the line. We plot the line clearly on the bent edge, after which we cut off all unnecessary, leaving a cut of 1.5 cm. We cut the cut with an overlock and steal up. On the front side of the folded stitched parts, make a line with a small step in the thread in the tone of the fabric. To the underside of the processed seam is not flawed, it can be glued to the leg with a special tape for podgibki trousers. Using this option to shorten the jeans, you can use a linen or so-called seam stitch, then you can do without an overlock. However, the underwear seam is suitable only for thin fabrics. This is a more common and easy way, since you can sew jeans with a seam stitching even manually without a sewing machine.

It is worth noting that even the trousers purchased can have different lengths, so, having marked the desired length, do not be lazy and compare both legs along the outer and inner seams, this can be done with a usual centimeter tape. The process does not take much time, but you can avoid a blunder and save your new jeans.

It is not necessary to trim the jeans in an old-fashioned way and deprive them of a harmonious appearance, because, knowing how to sew jeans with preserving the seam, it's easy to fit any model to your height and enjoy beautiful and stylish trousers.