How to rewrite a video cassette on a computer?

In the age of high technology, few people use VCRs. However, almost everyone has cassettes that contain different records important to their owner. As you know, over time, the quality of video recording deteriorates. Therefore, if these records are expensive for you, then they should be digitized. From this article, you will learn how to rewrite a video cassette on a computer.

Of course, you can apply to specialists who will do everything for you, but the fact is that the digitization of video recordings is now expensive. If you have a lot of records that you need to digitize, you will have to pay a large amount for this. But why spend money, if you can learn how to record from a videotape to a disc for free?

For this procedure we will need:

1. A computer with a Windows operating system. Moreover, you should know that it must meet certain requirements. A typical office computer is not suitable for your task.

2. Before rewriting the video cassette to a computer, you will need to purchase a TV tuner if you did not already have it. In comparison with the prices for digitization, the tuner costs not so much - up to 1000 rubles. The installation of the device is not difficult. The TV tuner looks like a regular board. To install it, you need to open the cover of the system unit (before turning it off), insert the card into the desired slot, and fasten it. After that, you will need to install the drivers for the hardware. It should also be noted that some TV tuners work via USB-interface.

3. Knowing how to rewrite a videotape to a disc or any other medium, you must take care of other equipment - a VCR or a video camera. It all depends on which video format you are going to digitize.

4. Before rewriting the video cassette to your computer, make sure that you have a program for editing or recording video. To perform this task, Windows Movie Maker, Movavi, Cyberlink Power Director and others will do.

5. Adapters from the TV-tuner. Usually they are sold complete with the latter.

So, having acquired all of the above, you can start digitizing records from a video cassette.

After installing the TV tuner, you need to connect the VCR or the camera to the latest via adapters. After that, you need to start one of the installed programs. In the video editor, you first need to set video capture parameters : sound parameters, color depth, frame rate, etc. Before rewriting the video cassette to a computer, it is recommended to find out the meaning of certain parameters so that the quality of digitization is the highest.

After that, you need to start the player (VCR or camera) and the editor on the computer. Digitization will begin. During recording, it is not recommended to run any other programs on the computer and use them.

After the recording is complete, remember to save the file. Also, you can edit the received video according to the capabilities of the program that you used.