How to reflash "Android" via computer or without it

Probably, everyone who used tablet computers, faced with some kind of software malfunction. Some could be solved by simply reinstalling the program or game from the Market, while others required more drastic measures, like a complete reset to the factory settings. If this did not help, then the question arose of how to reflash "Android" through a computer. There are several basic methods. We will discuss them in this article.

Firmware Search

The first step in this case is to find a suitable firmware for it. If there is a question about how to reflash the "Android" Chinese, which does not have identification marks, and the model can not be determined, then you can simply disassemble it and see which processor and other modules are installed on the board. Often such tablets are made on AllWinner or RockChip processors, and the firmware for them are interchangeable. In other cases, it is worthwhile to find the model number of your device on the case, or to look at the device's menu if it is still turned on.

First of all check the availability of firmware on the official website of the manufacturer. If it is not there, then just go to the major thematic forums devoted to this issue. Do not download suspicious files, because they can contain malicious software. Have you found the firmware? Congratulations, the first step in deciding how to independently reflash "Android" is done!

How to stitch - through the computer or without it?

There are two options for firmware - with the help of a personal computer or through the firmware of the tablet. In the first case, you need to prepare a PC, which we will talk about a little later.

The second case explains how to reflash the tablet "Android" independently without a computer. To do this, download the firmware in the archive, which is an image intended for deployment by the tablet's own forces, and loaded onto a memory card that subsequently connects to the gadget. When you press a certain key combination (it is usually indicated in the firmware manual), you will be taken to a special service menu, which the masters call the "Recovery".

Further, according to the same instructions, you should select the file with the firmware on the card and confirm the installation. As a result, after these actions you will get a working tablet if the problem was only in the software. Often, all data from it is deleted.

Preparing the computer for firmware

If the tablet does not turn on at all, or there are no firmware for "Recovery", it can be stitched using a personal computer. In this case, you will have to download not only the firmware itself, but also drivers and the program-broacher.

First, you download and install drivers that will allow your computer to recognize the tablet and work with it. Without these programs, the computer or laptop simply will not see the gadget and, accordingly, the firmware will fail.

The next step on the way to solving the question of how to reflash "Android" through the computer, will be installing the program for firmware tablet. What exactly will be needed in your case, you can find out on thematic forums or instructions from the manufacturer. It is this program that performs the functions that in the previous version performed the "Recovery".

It works with an image of the firmware and correctly registers its blocks in the memory of the gadget. If everything was chosen correctly and there are no hardware problems with the tablet, after the firmware is completed it will turn on and will work. If the problem persists, it is not associated with firmware, and a hike in the service center can not be avoided.

What if the firmware is not found anywhere?

But what if you already know how to reflash "Android" through a computer, but can not find anywhere suitable for your model firmware or flash program? Then there are two options.

You can ask for help on all the same thematic forums, where you can tell where to get what you need. Probably, for your device the firmware from other model will approach, and to you simply will show this possibility of replacement. If this does not help, then you can use the second option, which, unfortunately, does not always work.

It consists in contacting the manufacturer through the official website or by phone. Some manufacturers appreciate the buyers of their equipment. And with joy will help to solve the problem. Others will require a visit to an authorized service center, and there is no other way out, unfortunately. In any case, in a conversation, show the manufacturer's representative that you know how to reflash the tablet "Android" yourself, so that he does not doubt you and your knowledge.

Conclusion

As you can see, the firmware of various gadgets, and tablets in particular, is not as complicated as it seems. In most cases, there are clear instructions that help to do this. If you still do not understand how to reflash the "Android" through the computer, then we advise you not to experiment and contact the service center, so as not to increase yourself the cost of repair work.