How to optimize Windows 7 and ensure optimal performance

In a relatively short period of time, the seventh OS has become one of the most popular versions among users around the world. Microsoft really tried to make it famous. However, there is nothing perfect, and some people, inspired by the performance of the new OS, have a logical question: "How to optimize Windows 7?" At the same time, not always increasing the effective capacity of a PC is associated with a hardware upgrade. In most cases, you only need to occasionally conduct "electronic" prevention, and most importantly - be able to configure the computer for yourself. After all, each of you, dear reader, has its own preferences, individual vision and requirements for the computer technology used. Do you want to give speed to the operating system? Do you want a comfortable and stable work behind the computer screen? You have every chance to teach your PC to "fly"! Doubt will melt immediately after reading the article.

How to optimize the performance of Windows 7: eight "fly away" recommendations

Always remember that the seventh OS is, first of all, the program, as well as all the rest of the software that uses the hardware resources of the computer. Therefore, the system requirements of this OS should be "respected". The amount of RAM, the processor power and the storage capacity are critical components of the PC configuration. Minimal discrepancies with the required Windows 7 values will be reflected in the operation of the system as a whole. It is worth noting that significant changes in the performance of the seven with a "weak" computer configuration can not be achieved. If everything is in order, and there is a "margin of safety", the user has a lot of opportunities to affect the performance of his electronic "horse".

Torque: hard drive without "brakes"

As information accumulates on your hard drive, its performance will decrease. In deciding how to optimize the Windows 7 system, first of all you should pay attention to the organization of data storage. Standard tools are suitable for these purposes.

• Enter the "Start" and select the "Computer" tab.
• On the system drive "C", call the context menu, from the list click on the item "Properties".

In the minimized window, click on the "Tools" tab, then you need to use the "Check hard disk for ..." items and defragment the partition (the next block).

It does not hurt to go into the same service window in the submenu "General" and clean the disk.

Additional memory - do not let it down!

In some situations, you need to optimize the swap file.

Windows 7 is quite an "insatiable" software environment, and RAM is often not enough for the correct operation of resource-intensive applications. Therefore, it makes sense to expand the swap file, which in the OS is referred to simply as "pagefile".

• Go to the "Start" menu and, hovering the mouse over the "Computer", right-click on the manipulator, select the drop-down list from which to select "Properties".
• The next click on the item "Additional System Settings", which is located in the left window area (last in the list).
• In the window that opens, select the "Advanced" tab. In the "Performance" block, activate the "Parameters" button.
• Now click on the "Advanced" link in the configuration area, from which you will be given the opportunity to make the necessary revision by pressing the "Edit" key.
• Since the space on the system disk should be protected, and the question of how to optimize Windows 7 requires specific actions, it is reasonable to move the "pagefile" to any other "non-critical" capacity of the drive partition.
• Select the system disk (C) and uncheck it.
• Now select the required partition and in the "Specify the size" block enter the value: the source - the amount of RAM, the maximum - twice the value of the memory.

After the reboot, the changes take effect.

A cunning system: hidden megabytes of RAM

Indeed, the OS can hide a small amount of RAM. As in the case that will be described below. However, there are situations when the system "does not see" whole gigabytes, and it is connected with some limiting nuances of versions of Windows 7. The OS optimized for games is a 64-bit system, since only this kind of system allows to use memory up to 32 GB. Of course, the 32-bit "colleague" is much more modest with its 3 possible gigabytes, and, as is known, modern games are very demanding on the physical parameters of the installed RAM.

So, how to restore the lost memory?

• At the command prompt (Start menu - search) enter "msconfig".
• In the service window, open the "Downloads" tab.
• Activate the "Advanced Options".
• Now uncheck "Maximum Memory", and next to "Process Number" set the value to "2".
• Restart the computer.

The above example will allow you to optimize the RAM of Windows 7. However, a more fine-tuning of RAM is possible only with the participation of special software.

Disabling "extra" services

In the system, you can hold, so to speak, the reduction of "states". That is an incredibly huge number of services involved in the OS, for ordinary users are meaningless "eaters" of resources. As a result, they simply need to be turned off. This is especially important when a laptop is used as a workhorse. After all, in order for a laptop to function as long as possible in the offline mode, first of all, it is necessary to reduce the consumption of system resources to a minimum, that is, to optimize the operation of the laptop. Windows 7 is a system with an incredibly extensive base of integrated tools. However, using only some functionality, you will not be able to achieve a significant performance increase. Nevertheless, for a comprehensive solution without disabling "passive" services simply can not do.

• Open the control panel and click on the "Administration" tab.
• Then (with administrator rights) click on the item "Services".
• From the list presented, select the "candidate for the elimination" and through the context menu stop it and then disconnect it through the "Launch type" tab.

Attention! The stability of the system directly depends on the coherence of the work of many services. Therefore, disabling the services that you see as objectionable may threaten the full functionality of the operating system as a whole. So if you are not sure about your actions, find out how to optimize Windows 7 with other tools and methods.

Work without sense and automatic braking

Perhaps you noticed program shortcuts in the system tray. In fact, most of them remain unused during the next work session. However, the resources they spend adversely affect the overall performance of the current OS.

Of course, some background programs should be simply turned off. The familiar command "msconfig" will make sure that nothing superfluous together with the operating system is loaded when the workstation is turned on.

• After you called the "System Configuration" window from the search box, click the "Startup" tab.
• Unchecking allows you to deactivate the program, and in fact this is another element of the answer to the question "how to optimize Windows 7?"

Some caution: along with the system are automatically loaded, so to speak, critical to the stable operation of the OS programs and applications. If you do not know how deactivation of this or that startup item can affect, it will be safer to refrain from unconscious actions.

A professional will tell you how to optimize your computer

Windows 7 in the course of its work uses a special database - the registry, which stores the settings for launching various services and applications, as well as data on the operating system settings. Between the registry and the OS there is a constant exchange of data, and a lightning, counted by several hundred hits per second of time. Also interact with the database and programs. In the process of working, the registry accumulates a lot of unnecessary information in the form of "memories" about a remote software or changed settings in the operating system. As a result, digital garbage prevents the effective operation of the database. Performance is reduced, and the system becomes unstable. Unfortunately, the "Seven" does not have a sufficiently clear and effective tool for debugging the registry, in the arsenal of the OS only a special editor. However, to be able to work in it, you need to have the appropriate knowledge and have some skills. Nevertheless, today there is an incredible amount of software that competently copes with such tasks. The user only needs to launch the application and press a few buttons, the rest will be made by the program. Optimize Windows 7 thoroughly possible only with the help of complex solutions, the use of which does not oblige the owner of the PC to have special knowledge. This will be discussed in the next paragraph of the article.

The Almighty Helper

It makes no sense to focus the reader's attention on the name of a particular program, because there are a lot of tips about what software is better for optimization. One thing to be clear: the program should be easy to manage and effective in action.

For example, some "soft-monsters" have the option "one click", that is, it is enough for a user to press a certain button once, and the optimization process will be automatic. But in spite of the fact that the machine "knows" how to optimize the work of Windows 7, there is still a risk of mistaken miscalculation.

Visual resource waster

And now it's time to touch the colorful side of the "Seven". It is in a stylish design Aero Glass really looks impressive. But, as you know, beauty requires victims, and the user more than pays for the coveted graphics resources allocated for visual effects in the form of system animation. Of course, in special cases, "beauty" will have to be disabled in Windows 7. The system optimized for games is, of course, the least of all in the name of freeing the computational potential of the entire operating system as a whole. And if you, the dear reader, are not a gamer, but you will not refuse from the maximum speed of the system, use the method described below.

• Start Menu - Computer - Advanced Options.
• Block - "Performance" - the "Parameters" button.
• In the next window, open the "Visual Effects" tab.
• Check "Ensure the best performance".
• Then click "Accept" and "OK".

Finally

Within the framework of this article, there was no place to describe the process of disabling the "User Account Control" service. The review material only touched superficially on portable electronics, and in fact, in order to optimize the performance of the notebook, Windows 7 can offer several options for energy saving schemes. However, the main moments of "dispersal" and methods of containing "electronic appetite" were still taken into account and presented in full. Be in harmony with the system!