Home and familyPets

How to make hals for dogs with your own hands

By itself, the design of the hulti has the form of a bridle. This device is used to control the dog for a walk. Halt (halter for dogs), with proper use, is absolutely safe. Below we will consider all the positive aspects of this device.

Halt for dogs - the main advantages in using for the owner

So, the advantages in using the halter are as follows:

  1. The dog owner fully controls the behavior of the dog. So she can not jump on passing people or pull her master behind her.
  2. Hulti is the ideal accommodation for a comfortable trip with your dog in public transport.

And what is the benefit of this device for the dog? We will discuss this further.

The advantages of using a halt for the dog

Halt for dogs can also be used in working with puppies. And all because the halter is the safest, in comparison with the usual muzzle. He does not strangle the animal, which makes it possible to use it even if the dog has any injuries to the neck or spine.

And the last plus - this adaptation allows the dog to eat and drink absolutely without any inconvenience.

These criteria, shown above, show all the convenience and versatility of the Halt for dogs. And further, the list of the sizes and breeds of dogs which approach to the given size will be resulted.

The sizes of halsi for dogs and breeds suitable for these sizes

In total, there are five sizes, from 0 to 5. In this part of the article will be listed and the breed of dogs that fit into this or that size of the halter. It is important to remember that a properly sized size will allow an animal to feel comfortable in such equipment, and, in addition, it is also safety. After all, if the hilt is too large, the dog can easily take it off and run away from the owner, and in the worst case, pounce on a passing person.

And now specifically about the size:

  1. The first size is 0. It's perfect for the smallest small rocks. These include dwarf taxes or those poodles.
  2. The next size is 1. It will suit the dogs a little more. For example, the Basenji will feel very much in a halter of this size.
  3. Size 2. It can be used for such breeds as beagle, Scotch terrier, etc.
  4. The penultimate size is 4. There are fairly large breeds here: the Great Dane, the Rottweiler, and the like.
  5. And, finally, the last - 5. This size is suitable for dogs of the Mastiff breed and other, not less large breeds.

So, let's summarize the above. When buying a halter in a store, it is important to choose exactly the halt, which is the most suitable for the animal in size. The halter should not be neither too small nor too large. The indicator of a properly sized size is the ability to open the mouth freely for a pet.

Manual for the manufacture of Halti own hands

Often there are situations when it is impossible to find a halt in the city's pet shops. And why? Because in Russia this accessory does not have the same popularity as abroad. Russians are accustomed to muzzles for their pets and often go by the windows with halters. But, by the way, it's easy to make hals for a dog with your own hands. And how it's done, we'll take a closer look.

What is necessary for the manufacture of halsi

How to sew haltti for a dog with their own hands? The answer to this question is quite simple, but first, you need to say that you need to work. The list is rather small. All that is on this list, you can safely find in any store at an affordable price.

  1. The sling, length of two meters.
  2. Two rings.
  3. Two small carabiners.
  4. Plastic fastener and regulator.

The main stages of work

After purchasing the necessary materials, you need to find out the size of the dog. To do this, it is necessary to measure the neck circumference and girth of the mouth, as well as the distance from the neck to the beginning of the mouth. In addition, you need to know the distance from the leash, which will be on the neck of the dog, to the middle of her nose.

When the dimensions are known, it is necessary to cut the strap into pieces of the desired length. It is important not to forget to leave a few centimeters of stock on the seams.

Hulk's fastening is mainly on the dog's scruff. Leash on her neck is best taken with a margin of 10 to 15 centimeters. Then, at one end of it, you need to sew in a length adjuster and lock. After that, the shortest piece of slings is taken, and at the end of this piece a ring is sewn. And the other end of this piece is wrapped in half and sewn to the collar.

It is worth noting that this part of the Halt will be under your muzzle. Then, a loop is sewn, which will wrap around the dog's muzzle. It should have a ring sewn in exactly the same way as on the collar.

It will be very good, if to those places where the hulti will touch the body of the animal, you will sew a soft cloth. After that, two more pieces of slings are sewn, which must go from the leash to the nose to the collar.

Halter halter for a dog to sew by hand is easy enough and simple. A lot of time it will not take, and the money will be cheaper.

Opinions of people who use halt for dogs: photos with examples of hulti

Regarding the use of halti, a lot of opinions arose among the owners of dogs. Someone considers this device to be unsafe, but someone on the contrary, so without which it is very difficult to do. So what do people think about the Halt for dogs? Reviews on the sites are mostly positive. Also here are some good examples of hals.

Many of the owners, at first they used a regular leash, and, often, a walk for them became a torment. The dog did not obey, tried to escape from the hands of the owner. This was the reason for finding an alternative.

Among the buyers of Hulti there are a lot of those who started the dog for the first time and are trying to find the most suitable variant for their walks. In a word, everyone has their own motive.

As for the pluses, which have revealed dog breeders, there are a lot of them. The most basic of these is the absence of any damage to the animal due to the use of halsi. In addition, the dog will be able to calmly drink, eat and walk in the fresh air. And, of course, one should not lose sight of the convenience during a walk for the owner himself.

Another important plus is the rapid adaptation of the dog to a new attribute. As the owners write, in order for the animal to become accustomed to a halter, only a few hours and quite a bit of patience are enough. Without attention, there was no durability of the Halt. Many of those who bought it have been using this device for several years already, and they are sure that it will last for a long time. An acceptable price dog breeders are also considered a hallmark of Hulti. For many, the acquisition of such an attribute did not become a catastrophe in the budget plan.

So, the general result can be summed up like this. Hulti can and should be used. The halter is safe for both the dog and the host. In addition, it is quite inexpensive and can not afford to be hard on your pocket.

Some tips for starting a halt

At the end of the article, I would like to say a few words about how to help a dog get used to a halter. After all, in order to use the halter was really convenient for both the dog and the owner, it is necessary that the pet is accustomed to it. And how to do it, will be described further. So, in order:

  1. The first stage is to give the dog a sniff of the halsi.
  2. It is necessary, holding one hand strap for the nose, give a treat to the dog through the hole and put the strap on the dog's nose. Continue until the dog itself starts to push his nose into the hole.
  3. When the dog finally gets used to and will not bite or try to rip off a halter, you can completely put on a hatterie on a dog and go out into the street.

Observing these three points, you can quickly and easily achieve that your pet will get used to the hilt and will not break.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.