How to make a stone slab in "Maynkraft": instruction

To create various buildings in the world of "Minecraft" you can use almost any resources there. However, playing in the survival mode, it is very difficult to get the required object, therefore for most buildings usually the most common stone is used. Today we'll talk about how to make a stone slab in the Maincrafter.

Receiving

Before you make a stone slab or an analogue in Minecraft, you will have to get the right material. Fortunately, this resource is found everywhere right under the soil layer.

To get it, you do not need any tools. However, for extraction by hands you will have about 7.5 seconds per block. So it would be better to use at least a wooden pickaxe. The production time will be reduced to 1.5 seconds.

After extraction, you will get a cobblestone block. Before you make a stone slab in Maynkraft, you will have to burn the necessary resource in the furnace. Be careful! If you install a stone block on the surface, and then work it out again, you will again get a cobblestone, and it will have to be re-burned.

After receiving at least three blocks, one can begin to consider the question of how to make a stone slab in Maynkraft 1.8.

Plate

Now you can start the crafting process. To make a conventional stone slab, place the three blocks of stone in the lower cells of the workbench. So you get just three stone slabs.

These items can be used as stairs or for decoration. It should be noted right away that the plates are full-sized blocks. That is, the water does not flow over or under them. There will always be an empty space. When falling loose materials such as sand or gravel on the slab, they fall out in the form of a block.

In addition, plates, torches and levers can not be placed on placed plates. On the other hand, you can put these items on it from the side. Putting two stone plates on top of each other, you combine them into one block, but there will still be a crack between them. When using a pick, both objects fall out.

Knowing how to make a stone slab in "Maynkraft", you can create not only ladders, but also side shelves, as well as mechanisms for automatic extraction of bulk materials. If the stove is installed on the fence, you will get a table.

Pressure plate

Another way to use stone blocks is to make mechanisms out of them. To do this, you will need red dust to create circuits and activating elements. How to make a stone pressure plate in "Maynkraft"?

Imagine that the workbench interface is a NUM keyboard. Then the cells will correspond to the specific numbers on it. Place the stone blocks on 4 and 5 cells. So you can get one pressure plate.

This element is very durable and is not pressed when objects and arrows hit it, as it does with a wooden analog. Therefore, a person or a mob must necessarily step onto it for activation.

You can also get this item if you find it in an abandoned temple. Typically, at least one such component is generated. To get it, use a pickaxe of any quality. Without it, you will not succeed.