How to make a home network and deploy a local network

For sure, you are familiar with the concept of a local network. The simplest example is when there are two computers in one house, and you want to create a link between them with the ability to transfer files from one to another. How to make a home network? This can be done in two ways: through wired and wireless communication.

Let's consider each of them separately. In order to connect the two computers with a wired connection, you will need a cable. You can buy it in the store. By the way, ask that you immediately squeeze it with connectors. When you come home, plug one end of the cable into the network card slot on the first computer, the other, respectively, into the connector on the other. Turn on both computers.

Before making a home network, check the availability of computers, the antivirus can block the connection if it is installed. Now, you need to go to the control panel and select the "network" menu. We press on "search of networks" and, in general, everything. You will not have problems with data transfer, as well as games on the network.

Let's talk about how to create a local network. Before you choose the type of network. We choose the "home network", and all network computers are located within the same building or home. Right-clicking on the "connect to the network" icon shows that there was a shortcut with a connection. The same procedure must be performed on another computer. That's all, now your computers are connected by a network.

Now consider how to set up a local network using a wireless connection. Well, here everything looks much more attractive in terms of scale. There are many different types of local networks, through which radio access to the Internet is carried out. The most common of these are wi-fi, WLAN and DSL. An important difference of networks of this type is that in this case you are already assigned a specific ip address directly by your ISP. And these networks allow you to go online.

How to create a home network network via Wi-Fi, nowadays, probably, everyone knows. All you need is a wi-fi adapter (modem) and an ip address. Everything is done in the same way as when creating a home network, only in the selection menu we are looking for an "Internet connection".

Regarding DSL and Wlan - all the same. But we are a bit away from the topic. The most common and convenient way to make a home network using a wireless channel is, of course, Wi-Fi. This method allows you to provide mobility to all computers on the network and the ability to transfer already-connected machines, which would be impossible with the use of a cable, because sooner or later it will end.

Let's talk more about this kind of connection. Wi-fi adapter is a small device, similar to a flash drive. When you connect it to the computer, in the list of network connections you will have one more - "Wireless Network Connection", which is exactly what we need. Open the "properties", and note, if you are using windows, then there is already a wizard in the wizard that will help you create the network. You add a network name. Depending on whether you want to protect your network or not, you can encrypt it with a password.

As you can see, you do not need to make any additional settings. After you have completed all the steps, restart the computers - and then the connection will appear automatically. If this does not happen, manually select the "search network" utility from the menu and connect yourself. As you can see, options like how to make a home network or deploy a local network is mass; Choose the one that is convenient for you.

I can not fail to mention the following fact. In operating systems such as windows vista and windows 7, it is enough to configure the connection only on one computer. On the second one it will come automatically by means of built-in connection systems. This applies, for example, to the Internet. If you configure the Internet on one computer, then on all computers on the network with it the same connection will be configured.

The last, perhaps, what is worth saying is that if you do not have the opportunity to create a wireless connection and you still use cables, and there are many computers in the network, then use a hub router. This is a kind of server, to which all network cables from computers of your network are connected. Through it, and the exchange of data.