How to make a frame from a tree with your own hands: step by step description and recommendations

In our time, the interior furnishings made with their own hands are in great demand. There are many stores selling products of this category. Handmade-products look original, the authors put not only imagination and skills, but also a piece of the soul. And it is pleasant to have in the house not standard products from the consumer goods, and individual product which in the single copy. However, for such products will have to pay a tidy sum, as authorship is valued expensively. It will be much cheaper if you show creativity, imagination and realize your vision of the household item, for example: frames for photographs, paintings, mirrors made of wood.

Creative plans

Before you take up any work, you always need to draw up an approximate plan of action, prepare materials and an object that you want to frame. The finished product should fit organically into the interior of the room, be it an office or a residential apartment. The frame can not fail to match the stylistics of the overall interior. Also, the materials from which frames are made differ greatly in texture, in quality, in color. The very wooden frame can be in a strict style, and maybe with a beautiful openwork carving.

Even a simple smooth frame made of wood is complemented by design elements that will give it a special style and originality. We also need to decide what to focus on in the work. If the main thing in the project is the design of the already finished frame, then it can be purchased at the store, and at home, it can be transformed into a masterpiece. If the object of creativity becomes the frame itself, then it is better to do it yourself.

Choice of materials

In order to make a frame with your own hands made of wood, the necessary wood is selected. Basically, you need to look at the picture and structure of the tree, because for this, in principle, any breed is suitable. If the frame is then painted, then the simplest one is chosen - pine or spruce. If the structure of the tree is visible and the product is subsequently covered with varnish or stain, then you need to take wood with the original pattern. Very beautiful look nut, ash, cherry, linden.

Beautiful frames for paintings with their own hands made of wood are created when they are carved (floral, story or simple ornament). For carving, wood is softened, especially if the carver is a beginner. The professional, of course, and on the oak board will make a pattern, but for a beginner it will be difficult, since the oak is considered a very hard tree. Also you will have to buy a set of cutters of different sizes.

Another option for making frames with your own hands made of wood is a simple wooden product, which is decorated on top with improvised materials. Now fashionable picture frames, decorated with something unusual. These can be pieces of bark, pencils, shells, buttons and other throwaway material.

Making a frame with your own hands made of wood

Before you make a frame for a picture of wood, you need to prepare the following materials and tools:

• Plywood or fiberboard;
• Wooden slats, plinth or baguette;
• Hand saw or jigsaw;
• Stool;
• Construction stapler;

• PVA glue;
• Acrylic lacquer or paint, brushes;
• Stain (optional);
• A plastic or metal loop;
• Nails or screws;
• Hammer or screwdriver (in case of emergency - a screwdriver);
• Angular clamps;
• sandpaper.

Planning something to glue the frame for a picture (you can make it with your own hands from wood), prepare the material that is needed for this. You can put the necessary pattern on the table in advance in order to understand how it will look.

Step-by-step instruction

The first stage measures the size of the picture and is cut from a plywood or fiberboard square or rectangle. The size of it should be more than the picture for the width of the wooden slats. Applying a picture or photo to the plywood, paint it with a pencil so that when working, do not stain the object. The picture can then be put aside until the end of the work.

The second stage in making frames with their own hands made of wood will be cutting the slats at an angle of 45 degrees. This will require a saw and a stool. A rack or a bar of wood is inserted into the stool and sawed through the line. Then repeat the procedure with another bar. Combine the corners of two pieces of wood, you should get a right angle of 90 degrees. Apply this angle to the plywood and mark the length of the other sides. After this, on the marked marks we make cuts of two other angles. The assembled frame is applied to the plywood and check its size. If everything clearly came together, you can proceed to the next stage.

The ends of the slats, cut at 45 degrees, are smeared with PVA glue and tightly tightened by angled clamps, left alone until complete bonding (approximately 2 hours). After that, for the best binding, join the corners of the rails with staples, using a construction stapler.

Building a wooden frame

The last step in making the frame is bonding parts together. There is a small nuance. If you fix a picture or a photo forever, then it can be glued to the plywood. Then everything is much simpler. The ready frame should be simply nailed to the plywood with nails or screwed with small screws. If the photo is false, you will have to work hard.

In order for the photo to be freely inserted into the frame, it is necessary to leave a gap between the frame and the photo. In the purchase frame, the wooden slats are machined on the milling machine and a step is made for the insertion. At home, not everyone has a router, so you need to do it differently. Between the frame and the plywood make an additional layer, for example from thick cardboard. Cut to the size of the stripes corresponding to the width of the frame, and are glued along the perimeter of the plywood on three sides. You do not need to do this from above. In that slot, a picture or picture will be inserted.

Then sand the surface and cover with a layer of varnish or paint. After drying, repeat the cleaning procedure and cover with one more layer. Allow to dry. Acrylic lacquer dries quickly and almost does not emit unpleasant odors.

The picture frame itself is made for a picture from the tree for a short time. It remains only to attach the eyelet and hang it on the wall. The only thing you can advise is to laminate the photo so that you can periodically wipe the dust without damaging the picture itself.

Variety of materials

You can create frames with your own hands made of wood and metal, baguettes and plastic, polyurethane skirting boards and simple twigs. Now there is such a free approach to the choice of materials that you can realize any flight of fantasy. The frames are roughly knocked down by large nails, are connected from the random size of branches, are burned with a blowtorch, and are ripped off with a rigid brush. Everyone has his own approach. Anyone who thinks of something, and embodies in his work. In our time, there are so many different materials and examples of other designers that you can, by viewing photos, choose the right one for yourself.

Designer frame for the mirror

You can make frames not only from racks or bars. Let's consider some variants of unusual frames. For example, how to make a frame for a mirror of wood with your own hands, using small twigs? Take for this plywood and cut out the figure, a few centimeters greater in diameter than the mirror.

If, for example, it is round, then a larger circle is drawn, etc. Then the mirror itself is glued to the liquid nails into the center of the plywood circle. On the edges there is a strip of plywood, which we will decorate. To do this, take the glue for the tree and in turn each twig is spread with glue and put in a circle end in the middle. The work is scrupulous and long, but it turns out completely original thing.

Frame of twigs

Consider another example of an original photo frame. With her hands, everyone can make it from her tree. On the plywood sheet, a photo is attached and a few centimeters of margin are left to the brim to frame the frame. Sprigs of one or different length are collected, carefully dried and treated with an antiseptic.

After that, you can cover them with acrylic lacquer, and you can leave it untouched. Take a beautiful twine, four beams are made from an equal number of branches. The bundles are tightly connected. It turns out a frame of twigs, which is then glued to the free part of the plywood sheet.

Invent your own version, create, search, try, and everything will turn out! Good luck!