How to knit reinforcement for a foundation

The foundation must first of all be a reliable support for the house. In order to be strong, the use of concrete alone is not enough. This design is necessarily reinforced. This method of the device allows the construction of structures capable of withstanding both a huge mass of walls and ground pressure during spring whipping.

For the production of reinforcing mesh , steel rods 6 to 32 mm in thickness are used. They can be either smooth or corrugated. In order to connect them into a single structure, basically two methods are used: welding and knitting. In industrial construction , the first is most often used, since the mesh is delivered ready-made from the factory, where it is easier to make such a structure.

In a private home ownership and in the construction of small structures, such a method of connection can be considered inexpedient, since it takes quite a few welders to quickly make a grid in place. Therefore, in such cases, the second method (knitting) is usually used. Next, consider how to knit the armature.

Use this method is also better because welding weakens the structure. In addition, rust can appear in the joints in the future, which will also make the reinforcement frame not very reliable, and this will certainly affect the durability of the foundation and the building as a whole. So, how to knit reinforcement under the foundation?

First of all, it is necessary to prepare the rods themselves, as well as the wire. The latter usually has a diameter of 0.8-1.2 mm. It is cut into pieces of about one or two meters in length. There is how much answers to the question "how to knit reinforcement". The easiest way is to install by means of pliers. In this case, the wire is folded in half, passes through the connected rods and binds. Further excess ends are cut by means of wire cutters.

Often, in self-construction, the craftsmen ask themselves how to knit the armature crocheted. This is another rather common method, which uses not pliers, but a special device that can be purchased either in the store or made independently of the wire. This tool is a hook, which The loop of the knitted wire is folded in two. Its ends are also wound on the hook after they have been previously passed through the connecting rods.

So "how to knit armature, using a crochet" - a simple matter. In both cases, the wire is tightened by twisting the hook. Factory models are equipped with a special handle to facilitate this process. Instead, you can also use a screwdriver. The hook is simply inserted into the socket instead of the screw. Using manual knitting, you can get the designs very flexible and elastic. To their disadvantages is the possibility of displacement of nodes in the process of pouring the foundation.

There is one more way, in which wire of a special kind is used: staples, connectors and fixators. In this case, no tools need to be used for binding. All work is done directly by hands. With the use of such elements, the knitting process can be accelerated. In this case, the nodes will be much stronger.

So, now you have some idea of how to knit the armature. Starting to do this work, you yourself will be fine in everything. This process is simple and quite feasible.