Homeliness, Repairs
How to cut ceiling skirtings in the corners with a chair and without it?
The procedure for installing fillets on the ceilings seems to be quite easy, but requires specific techniques for the successful completion of the repair. Often we cut the corners of the ceiling skirting absolutely wrong, which leads to a reduction in the time of its use and the low quality of the repair work. Correct docking, evenly fixed edges - is quite achievable result, if you use the recommendations of experienced professionals.
Varieties of finishing products
This material is intended for decorative finishing of the ceiling zone, its visual separation from the walls and the covering of joints of various finishing elements. Virtually any option of decorative design, interior design implies the use of such details. Otherwise, the room will look unfinished.
To fix this part, fillets are used, which are attached to the ceiling with the help of glue.
The choice of mounting option depends on the type of product:
- Of PVC - the cheapest, but also the most brittle, prone to defects, but easy to use, it can be cut with a knife.
- Expanded polystyrene foam is also inexpensive, brittle, requiring hacksaw for metal, although it is easily cut. A little more expensive is another option - from extruded polystyrene foam, it's more difficult to cut, but it crumbles less.
- Polyurethane is the most expensive and waterproof, durable and elastic. It is more difficult to work with, it deforms at high temperatures.
- Wooden - dense and heavy material, cut only by a hacksaw.
Finishing: Features
Many owners of houses and apartments often in the midst of repair work are puzzled by the question of how to properly cut the ceiling skirting in the corners. The problem is that there is no technical opportunity to make an incision at an angle of 45 degrees. To perform such manipulations, an important correct docking at the borders of the outer and inner corners of the canvas, which is quite problematic.
The specificity of the ceiling version is not only in the sheer position of the canvas.
For the most accurate cutting, a special corner element is used, which is inserted into the edge of the plinth - it will help to hide errors during cutting. This element will emphasize the corners in the room, the choice of such a detail must be approached responsibly.
Angle cutting
How to cut ceiling skirtings in the corners? The secret of the qualitative cut is in the execution of cuts on both the outer and inner sides. An internal incision is important if we perform an outer corner.
Usually use a professional technique - miter saws or electric punchers for industrial use. But supporters of home repair can do with ordinary tools. The main requirement - at the end of the work, the result should be a distinctly visible texture for the eaves, reflected on its front or back side.
Angle cutting technology
So, at what angle to cut the ceiling skirting and how does the formation of the angle begin with the help of home remedies?
First you need to measure the angle that is between the walls - for this you can take pieces of foam plastic from the technique. Usually the angle is 90 degrees - a strict perpendicular. In this case, cut the edges of the product at an angle of 45 degrees.
In the case of irregularities and mismatches in the gap between the ceiling and the walls, the radius of the corner must be divided into two. In this case, it is not necessary to confuse the details. The baguette for the left side is cut right, and the one on the right is vice versa.
Before cutting the skirting boards in the corners, form an angle inside the material in the upper space - this decision is based on the fact that the underside protrudes above the top. When the outer corner is executed, the procedure is reversed. It helps to smoothly and accurately customize the details of the very texture of expanded polystyrene materials. If wooden or plastic elements for baguette are used, then they will have to work more carefully.
Method of slicing with a stool
The most popular variant of fixing is using household tools. The chair is a well-known assistant to the carpenter, helping to make the cutting at the right angle. Usually it is a tray, wooden or plastic, having vertical slots for the blade at angles of 45 and 90 degrees. How to cut the corners of the ceiling skirting with a chair?
First you need to put the material to the ceiling, set its bar in the stool.
Hold the working material with your right hand, select the position of the hacksaw at a level of 45 degrees and cut off.
Cutting without tools
How to cut the angle of the ceiling skirting without a stool? It is possible to calculate and cut manually.
Attaching the product to the place where it will be mounted, you can immediately take into account all the errors on the walls.
Recommendations of the masters
The best know how to cut ceiling skirtings in the corners, experienced carpenters, carpenters and builders. The majority advises to carry out incisions from the side and try the strips to the ceiling, if necessary - to cut in the direction of abutment of the part to the surface.
After making a rough docking, tighten the final prepared fillet to the wall. The seams are sealed-the skirting board is finished.
Similar articles
Trending Now