How do I clean the washing machine?

It is unlikely that some modern hostess does without a washing machine, because it is an indispensable assistant. Unfortunately, dirt and grease often accumulate on the parts and surfaces of the device, fungi appear. Another problem is scum, which in the absence of proper care can easily lead to breakage. This is why this technique needs constant care. Probably every housewife at a certain time asks about how to clean the washing machine. In fact, the method of cleaning directly depends on the type of contamination.

How do I clean the washing machine of grease and dirt?

Mud and fat deposits are a fairly common problem. After all, together particles of fat, dust and other substances from contaminated clothing settle on the parts of the washing machine. Especially often with a similar phenomenon, those housewives who use low-temperature washing and liquid detergents that do not contain whitening particles encounter.

Proper care of the washing machine is especially important here. At least once every two months, adjust the device to the highest temperature, add a high-quality detergent and start washing, but without laundry. It is best to use special preventive detergents for this purpose. Do not use bleach in pure form - the best option is an oxygen agent with bleaching particles.

Instead of a cleanser, you can add ordinary baking soda to the powder tray. At high temperatures, soda crystals perfectly dissolve fats and quickly remove them. In any case, preventive hot washing will prevent reproduction of fungal and bacterial organisms.

How to clean the washing machine from scale?

Scale is another common problem. It appears when used during washing of solid water. After all, you will agree, water with a high content of magnesium and calcium salts is by no means a rarity. Scum is a white coating, which is deposited on the exterior and interior parts of the machine.

Perhaps the best remedy is prevention. To date, there are a lot of tools that are recommended to add to the tray during washing, as they protect the internal mechanisms from the deposition of salts.

Try to use magnetic water softeners - these are special filters that are installed on the filler hose or water pipe. Such a device perfectly cleans water from excess salts.

How do I clean a washing machine from mold?

Mold is associated with intensive reproduction of fungal organisms. After all, constant moisture and warm temperatures are excellent conditions for the life of fungi. With this problem, you can and must fight. First, the growth of mold is accompanied by an unpleasant odor. Secondly, spores of fungi during washing are deposited in the tissues of clothing, causing then all sorts of allergic reactions and even diseases.

A universal means of purification is the use of ordinary citric acid. To do this, in the powder tray, pour 200 grams of crystals, set the temperature at 90 degrees and start the washing mode, but, of course, without laundry. By the way, cleaning the washing machine with citric acid is also effective when removing fat, dirt and scale. Perform preventive cleaning about 1 to 2 times in three months.

There is another way to get rid of the fungus. To do this, you need a liter of ordinary table vinegar and the same amount of cleaning disinfectant (it can contain chlorine). Pour the prepared solution into the powder tray and start the hot-wash mode.

It is necessary to remove the mold and rubber surfaces, because it is there that it appears most often. To do this, it is necessary to clean the parts with a brush and a cleaning agent containing chlorine. 50% copper sulfate will also help. Carefully handle the rubber parts with a solution and leave it overnight (work exclusively in rubber gloves). In the morning, run the rinse mode.