Head of the bed with your own hands

The head of the bed transforms not only the bed itself, turning it into a royal bed, but the entire interior of the room, which immediately begins to play with new colors. If you do not know how to do it, but have been thinking about it for a long time, this article is for you.

Head of the bed with your own hands: the first method

For this option, you need to take plywood, sintepon, foam rubber, fabric, furniture stapler, scissors and glue. Plywood should be 10 mm thick, and the dimensions of each sheet - 45х90 centimeters. You can use textiles for the design of the headboard, which will contrast with the rest of the things in the bedroom, then this object will become a bright accent of the interior of the room. It will consist of four parts-shields.

Using a pencil, make a marking on the plywood, marking four centimeters from each edge. By marking, draw lines, then they will be required to pull and nail the fabric. Now take the foam rubber, its thickness should be four millimeters, put the plywood on top, and then cut the foam by its size. It must be glued to the side of the plywood sheet where there is no marking. Now the foam should be applied to the adhesive, which will fix the sintepon. The fabric should be turned on the wrong side, put a sheet of plywood on it, and then measure from each edge of eight centimeters on the allowances. Cut the fabric according to the resulting markings.

Place the almost ready board of the headboard with a soft side on the underside of the fabric, press it down with something heavy to get a good tension. Using a stapler, you need to nail the fabric along the lines on the plywood. So the first shield is received, the other three are done similarly. After that they can be attached to the wall above the bed.

Head of the bed with your own hands: second method

For this option, tools such as needles, embroidery threads, foam rubber, plywood according to the shape of the bed, buttons, special hooks and nails are useful. The head for the bed with your own hands can be made figured, for this you need to cut out its necessary shape with a paper template. The plywood is given a marking with a simple pencil, and then you can use a jig saw. With the help of a drill, it is necessary to make holes in those places where the buttons will be fixed.

With the help of conventional scissors it is necessary to cut out foam rubber in the form of plywood. The thickness of the foam depends on what degree of softness should be the head. For a tight connection of plywood with foam rubber it is necessary to use a stapler. Now with his own help you need to sew the headboard with a cloth. On the fabric should be formed only natural angles. The buttons are sewn with a cloth, then fasten them to pre-prepared places. On the back of the head of their need to fix the thread. On the wall, this headboard is fixed with the help of hooks. Now you can tell about its decoration.

Head of the bed with your own hands: decorating

The fabric for covering the headboard should be chosen suitable for the general interior and other items in the bedroom. You can buy ready-made canvases or use two different fabrics. Decorating with buttons is not a prerequisite, you can use photos, pictures and various knick-knacks. If you attach the tissue pockets there, you can put the most necessary items directly over your head. If you fix the curtains with large folds on the headboard, you can give the bedroom a romantic and theatrical poetry, and when installing the bed to the window, this design will protect you from the bright sunlight in the mornings.

To create a bed head with your own hands is not at all difficult, and looking at it, you will be warmed every time from the thought that you made it yourself.