How to reinstall Windows xp instruction for novice users

Every computer user sooner or later faces problems that can be solved by a single method - reinstalling the operating system. In addition, the skill and knowledge of how to properly install windows xp is also necessary in the case of the purchase of a new computer, especially when the PC is not supplied in assembled form, but "on components" without an operating system, which is more popular in our country due to the lower final cost Finished device. So, how to reinstall windows xp the instruction through which this is done is outlined in this article.

To understand how to properly reinstall windows xp, you should remember only a few steps, to which to share the installation process. By the way, the user who knows how to reinstall windows xp the instructions of which is described below, can easily undertake installation of other versions of the OS family of windows - the installation stages are almost identical for them.

So, how to reinstall windows xp instruction:

1. All valuable information from the system partition (in most cases - the C drive) is transferred to removable media, or to a logical partition intended for data storage.

2. You must find a bootable CD-ROM or other media that contains windows xp. About the ways of searching, you can create legends, but then how will the system be acquired, has nothing to do with the installation process. Let's just note that for today the installation of windows xp from drives, other than CD-ROM (flash drive, external hard drive, etc.) is increasingly popular. The installation process from all media is the same, only the method of preparing the media differs, but this topic is already for another article, we will assume that the corresponding medium is ready for use.

3. The most difficult stage for a novice user is to configure the BIOS of the PC to boot from a CD (another removable media). In most modern PC motherboards, BIOS settings are called up by pressing the Del key, or F2 at the time the computer starts. There are other options, which are described in the instructions to the motherboard. In general, when the screen with BIOS settings appears, it is necessary to select Advanced Setup (or something similar) using the arrow keys, enter it by pressing the Enter key. After that, find an item like Boot Devices and set the boot priority in it. The first place should be a CD-ROM or other medium from which the OS is supposed to be installed. For details on how to set the priority and which items to select, refer to the instruction manual for the motherboard. After setting the boot priority, the BIOS settings should be saved and exited from the basic I / O system setup program (most often the F10 key). After that, the PC will be rebooted, and if the compact disk is installed in the drive (the usb-drive is connected to the corresponding port), the OS installation program will start to load.

4. After copying the files required for installation, the user is given the choice of the installation script: installing over the existing system with saving parameters, files and programs (Enter key), system restore (R key) and "clean install" (Esc key). The latter option is the most preferable, although it assumes the loss of all user data stored in the system partition (in case they were not copied in advance). The matter is that with a clean installation, the data stored in the system partition is completely deleted, but all errors that occurred during the operation are deleted, and also the viruses that are "settled" in the system partition are eliminated.

5. After selecting the installation script, a window appears with the selection of the hard disk partition for installation. In the case of a "clean" installation, the system partition must be formatted.

6. After selecting the partition and formatting it, the process of copying the OS files from the removable media to the hard disk of the computer begins, that is, the installation itself, which usually lasts no more than an hour. This process does not require user intervention, is accompanied by a restart of the PC, and upon its completion "will ask" to enter personal data, as well as language settings and information on the geographical location and time zone settings.

7. After the installation is completed, the PC will reboot again and the user's eyes will appear with the interface of the newly installed OS. The user can only install the driver, as well as the necessary applications.

We hope that those who wanted to learn how to reinstall windows xp the instructions outlined above will help in this process.