Hand-made garden boulevard with own hands

For many, the garden plot is the place where you constantly need to work, plant or build something. When carrying out some measures for the improvement of the territory, it becomes necessary to make holes in the ground. This may be required for planting shrubs and trees, as well as installing fences and other structures. Of course, you can do this with a shovel. But this will take a lot of time and effort.

Significantly facilitates work on the backyard of the bur Zubr. Garden hand tools are very convenient. With it, you can easily make a hole in the soil of the right size. Using this tool makes it much easier to work. In addition, a bit of physical effort is required to apply the garden borer.

Can I do it myself?

Burm hand garden is an indispensable tool. As a rule, it is equipped with several augers, which are easily screwed into the soil like drills. Such a device is a good helper in the construction. Alas, not every specialized store can buy a garden drill with replaceable knives. And the price in some cases is too high, and not everyone can afford such costs. Therefore, the question arises: "Is it possible to make a garden hand drill with my own hands?"

Of course, you can. To do this, you need to have at hand some tools and material for work, as well as certain skills and abilities. The process of making a garden borer is quite simple. The main thing is to choose the right material.

What is required?

The hand-made garden borer is manufactured quickly and the result is a quality product. Of course, when choosing materials, you should be careful. After all, the reliability and longevity of the instrument depend on this. Do not forget that the garden drill consists of several parts. To make the instrument you need a scrolling pen, a metal pole and a screw, which make holes. Every detail must be made of quality material. Otherwise, the tool will not last long. Metal should be strong enough, because the tool will be used to make holes in the soil with different density. Soft material in this case will not work. For manufacture it is required:

1. Metal sheet.
2. Armature, 2 and 1.5 meters long.
3. Drills for working with metal.
4. Bulgarian and other tools.

Manufacturing process

To make a manual garden drill, it is worth using only high-quality metal. Of this material, several auger blanks must be made. Also, you should immediately determine the diameter of the parts. It depends on where the garden drill will be applied. If the tool is used to make holes for the posts, the diameter of the screws should be greater than the estimated diameter of the hole by about five centimeters. Otherwise, the device will be useless.

At the base of the blades, it is necessary to make holes that will allow the parts to be attached to the base. They should be done in the center. In this case, the holes must be small. Their diameter should be a millimeter less than what was done in the rack of the future drill.

What's next?

The garden drill consists not only of augers. Particular attention should be paid to the rack. It must also be made of a reliable material. To fix screws on the rack, it is necessary to clamp it in a vice, and then to make several holes across the rod. In these places it is necessary to cut the thread. You can do it with a tap. After this, you can fix the blades with bolts.

The hand-made garden borer is almost ready. The following manipulations must be carried out using the Bulgarian. With this tool you need to do radial incisions. This will allow, if necessary, a little to stretch the blade into a screw state from a flat one. After the work done, you need to process and then sharpen the bottom at an angle of 50 °.

The final stage

On the bushing side, a small indentation should be made, approximately 10 millimeters. This does not stop the manufacturing process. It is necessary to do liski, about three millimeters deep. You can do this with an emery circle. The tip itself can be sharpened so that it resembles a peak. After all, the garden drill will be used in soils of various densities. In the area of the lower end of the column, it is possible to make screw grooves. For this it is worth using the Bulgarian.

To make the garden auger manual auger was convenient in work, it is necessary to make a handle. It is usually fastened directly to the rack. In this case, the handle should not be welded. This will not allow you to adjust the height of the rack. It is better to lock the handle with bolts.

Finally

A self-made garden drill is the tool you need in the farm. After all, the device can be used for many types of work. In addition, the tool perfectly replaces the shovel. Making such a device at home is not very expensive. The main thing is to observe several basic rules and choose the right material.

To garden borer lasted long, it is necessary to protect it from the negative impact of various abrasives. First of all, it is necessary to paint the instrument with a compound that can protect products from corrosion. Only in this case the drill will serve more than one year. Besides, the device made at home will save the family budget and equip the household plot without much effort.