Girdling the gable with your own hands

Due to the fact that vinyl siding is a material with excellent quality characteristics, it is often chosen for finishing the gable of a private house. You can be sure after completing the works that the walls will be reliably protected from moisture.

Advantages of siding

Siding excellently copes with rainfall, and also does not burn out in the sun. Vinyl finishing material today is considered the most optimal option for facing. If you carry out the siding of the pediment, you can not be afraid of having to do extensive preparatory work. For such manipulations, you can use the plinth trim, which is distinguished by its impressive strength. But the most commonly used vinyl siding.

In the building materials store you can choose from a huge range of finishing materials, which has many colors and textures. This allows you to get the building, decorated in the original style. Moreover, you can create a pediment that can not be found on any other house. This is most attractive for a private consumer who carefully builds the exterior and independently works on his solutions.

Why choose a siding for finishing the pediment?

The siding of the gable is produced most often for the reason that the alternation of colors of the material looks very impressive and original. Vinyl lining is easy to install, it can be installed without the help of professional builders. This allows not only to save money, but also to carry out the work in the shortest possible time. This material has not so impressive value, and a variety of textures and colors can hit any consumer. After the plating, you do not have to worry about the fact that the walls of the house will be exposed to unfavorable external factors. Stability of the material to high humidity and temperature changes guarantees a comfortable and warm microclimate in the house.

Among other things, the siding of the pediment can be accompanied by the installation of a thermal insulation material, which significantly reduces the heat transfer from the base of the roof. This is especially important for private houses, for the reason that about 30 percent of the heat loss occurs through the roof. Siding is strong and durable, over time it does not lose color under the influence of ultraviolet. That is why such material is an economical and durable option of finishing.

The siding of the pediment can be carried out by the method of installing the material on the wall surface. It can be brick, wood, reinforced concrete blocks, and also stone. It is important to note that the lining of the house rarely allows the use of insulation materials, which can not be said about the siding, which suggests the possibility of using a heater suitable for the consumer at cost and efficiency.

Preparation of tools

The work can not be done if the master does not prepare certain materials and tools. It is important to check the availability of a mounting knife, a plumb line, a construction level, a drill, a tape measure, a steel ruler, a hacksaw for metal, assembly foam, galvanized nails, and self-tapping screws.

Most often in the absence of any tools, home masters use rented appliances. This is the most expedient approach for those who plan to deal exclusively with finishing their own facade. Some construction stores provide the opportunity to rent the necessary tools.

Carrying out the gable with a socle siding

It is often enough to finish the gable with the help of socle textured siding. Thus, it is possible to obtain a design that is attractive and respectable. The master does not have to invest much money to purchase materials.

Ground siding is often chosen for the reason that it is able to perfectly simulate the texture and color of natural materials by type of wood, stone or brickwork. He is able to reliably protect the pediment from external influences. With the help of this material, you can lay out an interesting and complex drawing by combining textures and colors.

Preparing the gable

The siding of the pediment with the siding with its own hands presupposes the need for preparatory work. They consist in cleaning the surface of the old paint, all kinds of dirt and dust. If you want to work with a wooden pediment, then it must be treated with a deep penetration primer, which is able to protect against mold and rot. In addition, you need to analyze how smooth and dry the surface is. Level differences for the siding installation should not exceed 10 millimeters. Otherwise, the lining can go in waves, which will change all the original linear dimensions.

Installing the frame system

Girdling of the gable with its own hands requires the installation of a frame system. If you want to work with an old construction that has an uneven surface, then the installation should be carried out exclusively on the frame. This will ensure the durability of the facing material, as well as help to level the foundation of the pediment and insulate the attic room. If the installation is made for a new construction, then the frame is not necessary for this. If under the roof you intend to place the attic room, then it is simply necessary to perform the installation of thermal insulation material, as well as carry out waterproofing works.

The distance between the elements of the crate during installation must correspond to the dimensions of the panels. When the gable is siding with the gable of a house, the photo of which you can see in the article, as a rule, the distance between the components of the lath is about 30-40 cm. Among other things, all elements must be installed strictly vertically. The correct position of the frame system can be checked using the building level.

Recommendations for installing the frame

The siding of the gable of the house can be made by using a galvanized steel profile, which forms the basis of the frame. Its installation is carried out on special fastening suspensions. It is preferable to use steel galvanized profiles to install the lath. This material is easy and does not exert additional stress on the foundation and walls of the house. In favor of galvanized metal, you can also say that it is not exposed to moisture, does not rot, and does not rust. It is worth considering that the metal profile will cost more, but the high price will be compensated by the strength and reliability of the design.

Installation of panels on the pediment

If you carry out the siding of the pediment, step-by-step instruction will help in carrying out the work. For the installation it will be necessary to prepare the fittings, namely the outer and inner corner profiles, the starting profile, and also profiles of the type J. In addition, the soffit panels will be needed. If there are arched windows on the pediment, the profile J will be simply irreplaceable.

First you need to install accessories for mounting panels. Do this in a certain sequence. Initially, the vertical internal and external profiles are set, which are called angular. The fixation of these elements starts from the top mounting hole, it is necessary to move from top to bottom. Profiles should be mounted strictly vertically, thus it is not necessary to be guided by rafters of a roof.

The siding of the pediment with a siding, the photo of which is presented in the article, requires the use of a plumb line, as well as the water level of the building. These tools will allow you to analyze the correctness of the installation. On the perimeter it is necessary to mount the starting profiles. When working with the elements that should be placed around the window, you should use the window and finish planks.

Tips of the master

Profiles should be placed in 25 cm increments, while the corners should be paired at the bottom element, it is important to leave a gap of 6 cm between the back "cheeks" and the overlap. After the hardware has been mounted, it is possible to proceed with the installation of the cladding panels. The technology of work suggests that it is necessary to begin to install these elements from the lower row. When installing, leave a gap with a maximum width of 10 millimeters. This distance will be necessary for the case when the material undergoes thermal expansion and contraction.

Features of work with soffits

When the siding is made with siding of the roof gable, it is possible to install heat-insulating materials. In this case, you should provide a ventilation space, which should be left between the skin and the wall. The diameter of the vent hole should be 1/150 of the attic space.

When installing soffits, you need to mount solid and perforated slats. The latter are necessary for ventilation. Soffits must be installed before the installation of the siding on the walls is completed. In this case, it will be sufficient simply to leave a gap for thermal expansion between the final panel and the rack. The girdling of the gable with metal siding assumes the need to use spotlights, which should be started from the receiving profile. The latter must be placed on the overhang of the roof.

At the next stage, the level will need to set a height mark for the installation of the receiving profile. If during the installation of this element on the wall there are some problems associated with the unevenness of the base, this fact can simply be corrected by the method of laying large wooden bars, which should be located under the fittings. The technology of mounting the soffit strips assumes the need to use the receiving profiles on the overhang of the roof and on the wall, while these elements should be located strictly in parallel.

Work on chamfering

The siding of the roof gable may require the installation of vinyl facets. Due to the fact that the windboards on the roofs are usually made of wood, they need protection from the effects of moisture. When installing chamfers it is necessary to provide a gap for thermal expansion of the material, its thickness should be equal to 2.5 cm.

The main features of mounting the siding on the pediment

Siding girders of the gable eaves are made by a certain technology, which does not allow tight tightening of fasteners. Between the material and the self-tapping screw the master must leave a temperature gap. Between the fittings and panels, you also need to provide a distance, the width of which can vary from 5 to 10 cm. This parameter will vary depending on the compression and expansion of the material at temperature differences. If you decide to start the gable paneling in the cold, the panels must first be held in a warm room, leaving the material there for 12 hours or more. This is required in order for the finish to acquire the flexibility necessary for installation.

Conclusion

Installation of siding on the gable of the house is possible, if you comply with all the rules of installation. It is important to purchase the entire set of materials and tools. Only then the master will be able to work without interruption from the process in the shortest possible time and get the expected result. And the siding with the siding of the pediment of the wooden house will be quite an easy task. Stock up with tools, knowledge and patience - then you will get a really cozy home.