Error code of the washing machine "Samsung" (Sumsung)

Washing machines brand "Samsung" are quite in demand. For today they are capable to brag of excellent quality. However, if the owner's model is misused, certain problems may await the owner. It should also be understood that the breakdown of the washing machine "Samsung" can occur for reasons beyond the control of the owner.

First of all, water wears the parts. In different regions of the country, its rigidity is different. At the same time, the contamination of the pipeline in the regions can be critical. Additionally, problems at the power plant can damage the electronic board that is installed in the washing machine.

How do I find the error code?

If we talk about washing machines that have a display, then the error code can be easily recognized by the inscription that appears there. In this case, you should first refer to the instruction that comes with the model. In it you can learn in detail about the problem that has arisen, as well as the ways to solve it. In some cases, you can solve the problem yourself without contacting a service center. However, in any case, you should carefully read the safety rules, which are specified in the instructions, and be sure to disconnect the washing machine before work.

Common Mistakes

Most often, consumers turn to service centers because of a breakdown of the water level sensor. This part in the washing machine is pretty capricious. As its name suggests, it sends information to the management card about filling the tank with water. There is a specified sensor from the system unit with contacts, as well as tubes. In some cases, only the hose is damaged. It can either disconnect from the unit or break as a result of mechanical damage. In either case, the error code "1E" can be seen on the washing machine display.

The second common problem is considered to be malfunctions with the electric motor. The device is rather complicated and its overload always ends pitifully. They arise, for example, when the owner loads too much laundry into the drum. Also, the engine may be blocked if an object falls on it. In this case, the code "3E" can be seen on the display.

What to do with the code "1E"?

As mentioned earlier, when the washing machine "Samsung" does not work, the "lE" error signals problems with the water sensor. In order to independently cope with the failure, you need to disassemble the case of the device. For this purpose, it is first necessary to remove the rear panel of the washing machine. Next you can see the top of the drain pump. Directly behind it is a water level sensor.

In order to remove the drain pump, you need to use a screwdriver. After that, carefully inspect the sensor. If the tube shows defects, it is replaced. In some cases, it may simply fall out of the block. In this situation it must be fixed there. When the unit breaks down, the sensor must be completely replaced. You can buy it at the service center by informing the model of the washing machine.

Error in the washing machine "4E"

If the display shows a "4E" error, the washing machine "Samsung" does not turn on because of a valve failure. It can be connected with an extraneous object, which accidentally touched it. Additionally, the valve contacts may be broken. The winding thereof is damaged. In order to find out the exact cause of the breakdown, experts advise first of all to check the correct connection of hoses. In some cases, hot and cold water can be broken.

Code of the washing machine "4Е1"

Errors washing machine "Samsung" - "4E1" are associated specifically with the supply of cold water. In such a situation, the washing of things can not begin, because the required temperature is not being dialed. You can try to solve this problem yourself. To do this, check the integrity of the hose, through which cold water flows.

If no defects are found, it is necessary to remove the back cover of the washing machine and check the pipe at the connection point. When it is broken, the cold water supply hose is best replaced immediately. Alternatively, one may consider the use of a sealant. If the damage is insignificant, it can simply be sealed.

Problems with tachogenerator

Problems with tachogenerators are quite common. In some cases, they arise precisely because of contacts. In this situation, the code "3E" appears on the display. If this problem is detected, the winding of the motor is first examined by a specialist. It can be disturbed by overheating. Additionally, third-party items can cause a malfunction.

As an example: a twisted bolt can enter the winding. Thus, the contacts are broken and the engine is not able to operate normally. If the problem is in the tachometer relay, users on the displays see errors of the Samsung washing machine - "3E2". In this situation, the signal between the contacts will be very weak. You can fix this problem by clearing the relay. If it is contaminated, the contacts are naturally blocked. Even in the engine tachogenerator, the sensor may break. It happens quite rarely, but the problem is considered serious. In this case, the displays show the errors of the washing machine "Samsung" - "3E3". To resolve this issue, you should check all contacts. The gap between them should not be significant. In this case, the signal from the sensor will pass stably.

What is the code for "5E"?

When the washing machine "Samsung" stops working, the error "5e" tells the user about the problems with the discharge of water. Most often the malfunction lies precisely in the pump, or rather its impeller. This element is located in the washing machine above the engine. In order to inspect it, you must first remove the protective filter. After that, you can twist the pump and check it. The impeller is located on it at the bottom.

In order to replace it, you need to use the key. If, in the long run, the pump turns out to be workable, then the problem clearly lies in the drain hose, which has a washing machine "Samsung". A "5E" error in this situation can signal that the pipe is simply clamped. In the worst situation, it will have to be cleaned or replaced. The drain hose is clogged most often due to the fact that various items, such as coins and buttons, can enter it.

Code of the washing machine "UE"

When the washing machine "Samsung" is broken, the error "UE" signals to the owner about the problems with the imbalance. This indicates that the linen in the device is laid unevenly. As a result, the drum is skewed. In this situation, the engine is not able to regain normal speed.

This error may well arise due to congestion. In order to avoid it, you should pay attention to the parameters of the model. In the instructions to the washing machine, the user can find information about the maximum permissible weight of laundry that the drum can withstand.

Error of the washing machine "SE"

If the Samsung washing machine does not turn on, the "SE" error indicates a cooling problem. This fault is primarily a drain of water in the piping system. This is due to the fact that its temperature is too high and exceeds 55 degrees. The reasons for this breakdown can be several. Most often, the problem of cooling is in the sensor, which is installed in a washing machine.

With the water temperature everything is fine, but the system does not see it. To solve this problem, a complete sensor replacement is required. Disassembling the washing machine, you should check all the connections, as the reason may be that the nozzles are not in their place. In this case, you can repair the model simply by putting everything in its place.

Problems with the engine (code "8E")

Errors washing machine "Samsung" "8E" are issued with a non-constant rotation of the engine. The cause of this can be considered violation of signals in contact. Additionally, the control unit may be defective. First of all, it is necessary to inspect the motor contacts. If they are dirty, they need to be cleaned.

When the problem lies in the control unit, doing something yourself is quite difficult. The simplest action is to replace this part. However, it should be borne in mind that the control unit is an expensive thing, and acquiring it, one must be sure of its necessity.

Power Failures

When the mains voltage is excessive, the display shows "9E1". In order to correct such error codes of the washing machine "Samsung", it is necessary to check the current in the network. You can do this with a tester. This device is applied to all power contacts. During the operation of the washing machine, it is also necessary to monitor the tester's readings.

In some cases, a malfunction may be caused by using an extension cord. If its length exceeds 1 meter, then a voltage decrease is possible. The most unpleasant is the failure of the control unit. In this situation, the voltage is normal, but the washing machine does not see this. This problem is solved by replacing the control module. However, with the code "9E1" this happens very rarely.

Why does the display show "AE"?

The inscription on the display "AE" is mainly associated with the model display system. In order to correct such error codes of the washing machine "Samsung", the experts disassemble the control module. At this stage, all connectors must be checked for integrity. If any defects are visible, they should be corrected. Most often they arise due to improper soldering. In the end, this can be called factory marriage. If after checking the display system is malfunctioning, the control module changes completely.

"FE" code: causes of failure and elimination

These errors, issued by the washing machine "Samsung", speak of problems with ventilation. You can try to solve them yourself, without contacting the service center. First, remove the back cover of the device. There is a fan, usually on the side panel. First you need to inspect the capacitor connector.

In some cases, its top cover may not hold. If the capacitor is OK, then it is necessary to check directly the fan, namely its wiring. If it shows defects, it should be replaced or sealed. It is important to observe the safety rules in order not to disturb the isolation of the system. In the last place to eliminate this error in washing machines "Samsung" experts examine the fan from the inside. In this case, it is necessary to start with the blades.

If they stop and something interferes with them, then the fan must be completely cleaned from dust. Also the problem can be covered in poor-quality bearings. As a rule, after a certain time they have the property of falling out. It is very difficult to replace them on their own. Considering this, it is more reasonable to give the fan for repairs to a service center.