Dremel soldering iron and its features

Market spec. The tool is constantly updated. Manufacturers offer more and more new models with improved performance and extended scope. Some tools are revised and redone. For example, everyone knows the soldering iron, which is powered by an electrical network. But very few people know that at present he can be replaced by a gas soldering iron Dremel. The country of production is Taiwan.

Features of soldering iron

Dremel soldering iron is a gas burner connected to a cylinder. It is structurally designed in such a way that the balloon is the handle of the soldering iron. As a gas, butane is used, similar to gas in lighters.

It is used for various purposes: welding, sealing, burning, melting, removing paint, heat shrinkage. This is due to the presence of various attachments. Depending on the model, their set may vary. There is also an arson system with adjustable flame power. It works thanks to the piezoelement. One of the most popular models is the Dremel Versatip 2000-6 soldering iron. Let's consider these soldering irons in more detail.

Dremel gas soldering iron has the following characteristics:

• The heating temperature without attachments reaches 1.2 thousand degrees, with nozzles - 550 degrees, with a hair dryer - 680 degrees.
• The maximum nozzle temperature is reached in only 25-30 seconds.
• The volume of the balloon is 17 ml.
• One cylinder is enough to burn the soldering iron for half an hour.
• The weight of the instrument without gas is slightly more than one hundred grams.

Care should be taken when working with the tool and safety. There is a risk of burns during operation. Therefore, it is necessary to wear protective clothing. In this case, the fire must be kept at a safe distance from itself.

Before starting work, the workpiece must be secured. It can not be held in your hand.

The nozzles can only be changed after the tool has completely cooled down. The clogged nozzle must be cleaned in a timely manner. This will extend its service life.

Equipment

The following components are supplied with the gas soldering iron:

• Directly the soldering iron itself.
• A set of nozzles of six pieces (for soldering, cutting, burning, and so on).
• Two cases for storing preheated baits.
• Napkin for cleaning the soldering iron.
• Keys for changing attachments (two pieces).
• Cap for protection.
• Catalyst for flameless combustion.

Also there is an understandable instruction with drawings, which helps to start working with the tool.

It is worth paying attention to the fact that the kit does not include the gas cylinder itself. It must be purchased separately.

Functional capabilities of the instrument

The capabilities of the soldering iron are due to the presence of various attachments. As mentioned before, there are six of them in the standard package. Each of them allows you to perform separate operations.

For normal soldering, a thin nozzle is used in the form of a stinger.

A wide nozzle allows you to heat a large surface.

For firing of wooden and varnished surfaces, there is a hair dryer.

Two types of knives allow you to cut the necessary materials (plastic, fabric and others).

The nozzle-reflector allows to compress the cambric.

Hot air, fed through a small nozzle, serves to burn patterns on wood.

Dremel Versatip gas soldering iron

This is a wireless model of the instrument, which includes six nozzles. It fully meets the requirements of the working process, since it has a temperature regulator. Of the additional functions there is also a lock from the children.

The length of the soldering iron is twenty centimeters. Weight - a little over a hundred grams. The volume of the gas cylinder is 17 ml. This amount of gas is sufficient for continuous burning of the fire for one hour. Suitable as a working fluid is butane or a mixture of butane and propane.

The scope of delivery includes the following parts: a box, a soldering iron, solder, a soldering tip, a cutting knife, a straight knife, other interchangeable attachments, a reflector.

Gas soldering iron Dremel 2000 Versatip allows you to perform the following tasks:

• Burning.
• Sealing.
• Fixation by hot method.
• Cutting materials and other functions.

You do not need to wait for the tool to warm up. Work passes with open fire at a temperature of one thousand two hundred degrees. Hot air is heated up to six hundred and eighty degrees. The temperature of the working nozzles is five hundred and fifty degrees. And they cool down in seventeen minutes. It takes a little less time to cool the protective caps - fifteen minutes.

Dremel soldering iron is a universal wireless tool that allows you to replace several instruments at once.