"Deck" (siding basement): characteristics, installation

At registration of private houses today the socle siding is quite often used, which pursues two goals. One of them is the protection of the surface from external influences, the other is decorating.

Why choose "Deck"

With the help of this finish, you can create an outer layer, under which it is easy to hide thermal insulation. This reduces heating costs, and the lower part of the house is reliably protected from dirt, water and snow drifts. Visiting the store of building materials, you can find the products of the company "Deck". Siding socle of this manufacturer has many advantages, among them: ease of installation, durability, and a wide range of use temperatures.

Main characteristics

Considering the features of the Deco socle siding , you can understand that these panels can last more than 50 years with proper installation and proper maintenance. The texture in the process of operation does not lose its original properties, and the material can be mounted at any temperature range. Siding is able to easily tolerate external damage, among other things, it has a heat resistance ranging from +50 to -50 degrees.

Admittedly, today the products of the Russian manufacturer "Deca" are very popular. Siding socle is no exception. It is not combustible, it will only smolder in the event of fire, in addition, it does not conduct an electric current, and when it is produced, toxic additives are not used. Due to the fact that the material is created to protect the facade, it perfectly copes with the vagaries of nature, its negative effects are not terrible, while the products do not exfoliate and do not rot. Do not see you on its surface and the processes of corrosion, insect pests, it is not interesting, during installation you note that for the work there is no need to have special skills.

The manufacturer has ensured that the panels are easily attached to each other due to the presence of a lock connection. Vinyl siding "Deca" has the ability to breathe, on its inner surface there is no condensation. To care it will just have to be washed, after that it looks like a new one again. In addition, the products are reinforced with a stiffener, which is able to withstand mechanical influences. If the correct width of the gap is observed, the geometry of the pattern will not be disturbed during installation, and even temperature fluctuations will not be reflected in this in any way. The appearance of the panels is so realistic that they look like a natural stone.

Characteristics of the basement siding of the brand "Deca" of different collections

Siding "Deca", the colors of which can be the most diverse, is on sale in several collections. One of them - Berg - was created to simulate a classic brick. The material has five primary colors, namely: brick, brown, golden, cherry and gray. The Berg collection will create a facade that mimics a natural stone, hand-worked. In the end, you will be able to get a surface that will not only be powerful and reliable, but also very interesting in appearance.

The Stein collection is represented by an imitation of sandstone. In the series, you can find five colors, and the size of this siding is 1196 x 426 millimeters. You do not have to worry about looking for additional elements from other manufacturers, since the Deck took care of this. On sale you can find starting bars, corner elements and j-profiles.

You can follow the example of many consumers and choose the products of the company "Deck". Siding socle of this manufacturer has one more series - Fels, which looks very reliable and severe, and outwardly resembles a rock of rock origin. The size of the product is 450 x 1152 mm. There are a lot of color solutions, namely: the northern rock, rye pearl, ivory and mother-of-pearl.

Installation: preparation

Siding "Deck", reviews about which only positive, you can install yourself. According to users, it is initially best to take care of the availability of a specific set of tools. For mounting and marking you will need: a screwdriver and a screwdriver, a cord, a square, a tape measure, a level and a pencil. For sawing and creating a sheath, you will need: a metal hacksaw , metal scissors, a Bulgarian, a knife-cutter, and an electric jig saw.

Stages of work

Siding "Deca", the dimensions of which were mentioned above, is set in several stages. First you will need to create a crate, which is based on a wooden beam or galvanized profiles. The latter option will last much longer, but it will cost more. Initially, the guides are installed, only after this you can proceed to the installation of rack profiles. The distance between the ribs should be calculated, taking into account the surface of the building, the amount of work and the dimensions of the products. The step should not seem more than 60 centimeters. The surface can be previously aligned, as an alternative solution, special pads are used, which allow to level unevenness. The next step is to set the starting bar, only after that you can proceed to the installation of the panels. It should not be forgotten that j-profiles and mounting angles will be useful in the work.

Methods of work

On the market of building materials, the Dece company itself proved to be very well recommended, the siding of the socle of this manufacturer can be found on sale at an affordable price. After all the preparatory work is completed, and the lath is installed, you can proceed to the installation of the panels. Work starts on the left, you gradually move to the right. The first panel is set to the start bar, while the next one is attached to the right. Lock joints must fall into the groove. After the completion of the first row, you can start the second, the master starts the new wall after the complete installation of the previous one.

Setting the starting plate is extremely important, it is mounted after determining the horizon, or rather, the lowest and highest points on the surface. On the perimeter, the starting bar is set, and the end and the beginning of the profiles must converge perfectly. For this, it is recommended to use the water level for the master . Once the installation of one row has been completed, you can proceed to mounting the angle. It is fixed by two screws in the upper part.

Cost

Siding "Deca", the price for which you should be interested, is on sale in a wide range. The average cost per panel is 150 rubles. Before you start, the wizard must determine how much material is needed for the cladding. For this purpose, initially the area of all walls is calculated, and afterwards the area of one panel is calculated. Then the first value is divided into the second, and this will allow to understand how many products must be purchased. Buy material is necessary with a margin.

Conclusion

Siding "Deca", prices for which are quite acceptable, has many advantages, you can also consider it as a material for finishing your house or office building, which will extend the life of the building of any purpose.