Christmas tree of plastic bottles with their own hands: a description of the technique of production, photo

Christmas tree of plastic bottles, with their own hands Made, can be an excellent surprise for the New Year and Christmas holidays. In this article, various ways of making such crafts will be described.

Materials and Tools

First, we will deal with the materials and tools that will be needed in the process of making such a magnificent decoration, like a Christmas tree made of plastic bottles with their own hands. This list includes the following subjects:

• Plastic bottles. Preferably green: after all, the natural color of the tree is green. But you can and any other. In this case, you will additionally purchase green paint and with its help properly complete the final work.

• Stationery scissors and a knife for cutting plastic bottles.

• Marker black for marking.

• Glue and tape.

• Wire.

• Steel pipe.

• Electric drill with a drill.

• A hammer.

• Cardboard or Whatman.

• Markers, pencils and paints.

Ways

You can make a Christmas tree with your own hands from plastic bottles in several ways. It can be:

• A large tree in the street with a central frame made of a metal pipe.

• Miniature Christmas tree of 3-4 plastic bottles.

• Flat applique from plastic containers.

The first way: a big Christmas tree

Such a Christmas tree of plastic bottles with their own hands Is made from a fairly large number of containers. Therefore, before starting work, it is necessary to collect an impressive supply of such bottles. There are two ways to create such an article. The first consists of the following sequence:

• We take a metal pipe of the necessary length and install it in the ground at the site of collection of the Christmas tree with a hammer.

• Then, step by step around this pipe, we make circles of the "lower tier of the Christmas tree" made of plastic bottles that fit tightly together. We fix them with scotch tape.

• Similarly, create the following tiers of our tree and fix them using scotch tape. We also take into account the fact that with each next tier the diameter of the formed circle decreases. That is, you should get a cone, which in appearance will resemble a New Year's beauty.

• The topmost tier of the Christmas tree should consist of only one bottle, clad on a metal pipe.

• Then you need to decorate the tree properly.

The key drawback of this method is that the New Year's beauty is getting fixed. Not everyone likes this. Therefore, some craftsmen use the second method, which consists of the following stages:

• As in the previous case, we install the central supporting frame from the metal pipe with a hammer in the place of creation of the craft.

• Using an electric drill, drill holes in the pipe at the level of each tree tier.

• In the drilled holes we establish a straight wire, the length of which is equal to the diameter of the tier. Then from the same wire we make a circle. Again, the diameter of each higher level is reduced so that the cone eventually turns out.

• The top part is made from a single plastic bottle, which we put on the free end of the metal pipe.

• Then in the lid of each bottle make a hole in which to install a hook from the wire, which is then fixed on the ring.

• Filling each of the tiers of the tree, we get the final result - a New Year's beauty.

• At the next stage we decorate the Christmas tree.

Unlike the first case, here bottles hang on the ring and can move.

Option two: a small Christmas tree on the table

It is not always necessary to have a big Christmas tree made of plastic bottles, as in the previous case. Then you can make a miniature beauty from plastic containers of green color with a capacity of 2 liters. The algorithm for making a Christmas tree in this case is as follows:

• We retreat about 3 cm from the bottom of the bottle neck and with the help of a clerical knife we cut off its upper part.

• Then we twist the sheet of paper and install it in the neck. Fix this whole construction with tape. The frame of the Christmas tree is ready.

• At the next stage, we cut off the bottom of the container, and cut the remaining part with rings 3-4 cm wide.

• Then cut the bottom of each ring in thin strips, and do not touch the top. The ring itself is then cut into 2 equal parts and screwed to the paper. For fixation, do not forget to use an adhesive tape. So, step by step, turn Whatman into green branches and get a miniature New Year's beauty. The top of the tree is left sharp and fixed with the help of all the same scotch.

• Next, our artwork should be decorated. Herringbone with her hands of plastic bottles is ready.

Another way

In the form of voluminous applications, a Christmas tree made of plastic bottles can be made by oneself (photo Some handicrafts, by the way, are presented in the review). In this case, as a basis, we take a sheet of cardboard or whatman of the required sizes. Then take 3-4 plastic bottles and mark them as a three-dimensional model of a Christmas tree. For example, it could be triangles or trapezoids. Cut it with a scissors and a knife using the model's layout. Then glue them with glue to the base. Then we form properly a sheet of cardboard or whatman. Upon completion, you can add this frame to the frame, and it will be an excellent decoration of your home.

Decorate the hand-made

Any Christmas tree of a plastic bottle, with their own hands Made, at the final stage must be necessarily decorated. For these purposes, you can use the usual glass toys, and garlands, and other improvised materials. In general, we do not limit the flight of fantasy and use everything that we consider necessary.

Summary

This article describes three main ways of how a Christmas tree made of plastic bottles is made by oneself. Each of them is suitable strictly for one specific situation. The simplest is the last, the third, which allows you to create a three-dimensional image of a Christmas tree. The most difficult is the first one. It requires a lot of material and it's not so easy to implement.