Ceramic corner for the bathroom: choice and installation

Tile - the most common and durable option of finishing the bathroom. Put by all the rules, it will protect the walls from the appearance of fungus and mold. In addition, it is very easy to take care of - the smooth surface of the tile is resistant to almost any chemical detergent.

They also like ceramic tiles for the variety of color solutions and textures. Create a unique design of the bathroom with this assortment is not difficult. And to tile securely protect the bathroom from water leaking, it is necessary to choose the right ceramic corner for the bathroom. And it is not enough to choose such a border - it should be established qualitatively.

Ceramic Corner

The main purpose of this accompanying element is to hide the gap between the bathroom and the wall. And only then - a decorative function, which, by the way, also bears a curb. The corner ceramic for a bathroom in a combination to a tile looks more elegantly and presentably, it is much more reliable and in due course does not lose color, unlike plastic. In addition, both the tile and the curb are made of one material, which will save you additional complications when mounting the corner.

Choice of ceramic corner

To choose a suitable design of the curb for a bath will not be difficult - manufacturers almost always include in the collection of ceramic tiles such additional accessories. When buying the same special attention is recommended to give the following characteristics that should have a high-quality ceramic bathroom corner:

1. Water resistant.
2. Resistance to external mechanical and chemical influences.
3. Absence of harmful substances in the composition.
4. Possessing the most simple design.

Before buying, carefully measure the length and width of the bath, as well as the gap between it and the wall. According to these parameters, select the necessary footage and scale, which must have a ceramic corner for the bathroom. Photos on the pages of online stores have little to say to you, so it is better to look for goods among the "living" samples in conventional building stores and salons.

Required Tools

To install a curb, the following tools and materials will be required:

1. Solvent.
2. Glue for ceramic tiles or liquid nails.
3. Silicone sealant.
4. Pistol for sealant.
5. Special crosses for tiles.
6. Painting Scotch.
7. Wide and narrow spatulas.
8. Bulgarian.

Installing the ceramic corner

Ceramic corner for the bathroom can be installed in two ways. The stacking technology in both the first and second versions is quite simple. However, during installation, it is necessary to observe several basic rules that combine them, and also serve as a guarantee of long-term and trouble-free operation:

1. Thorough cleaning and degreasing of surfaces with which the curb to be installed will touch.
2. In the presence of mold removing it without residue and treatment of walls with antiseptics.
3. Carrying out the installation of the edge only after facing the walls with tiles.
4. Filling the slit with a sealant and covering it with a grout for better water resistance.

1st method of mounting the angle

On the perimeter of the joint of the bath with the wall is pasted a paint tape. Its purpose is to protect the edges of the thickets it hits the mounting foam. For best results, it is recommended to leave a small indent from the edges of the bath, literally 2-3 millimeters. The foam is poured into the gap and left until it dries completely. Depending on the brand, the retainer can freeze for 2 to 12 hours, and in this interval it is better not to wet it. After the recommended time, excess foam is cut off.

It is necessary to dissolve the glue with the help of which the ceramic corner for the bathroom itself will be fastened. Slice the border with a Bulgarian and pre-arrange it as it is supposed to place on the bathroom. In the absence of special corners, fit the long sides of the rim to each other, cutting them at an angle of 45 degrees.

On the corner along the entire length of the glue is spread, spread with a spatula. Then the border is applied to the joint of the wall and the bath and is slightly pressed. Make sure that there is no distortion - then they will not be corrected. In places where slits are formed between the elements, place crosses.

In a day, the paint tape can be removed, seal the remaining slots with sealant and cover them with trowel.

2nd method of mounting the angle

This method involves the installation of a corner without a gaping gap. The whole process is greatly simplified, and the time of work is reduced. This method is suitable only if there is no gap between the bathroom and the wall, or it has very small dimensions, and the cup itself should never be unsteady.

Stir glue, cut the curb. At the joint, apply the sealant and wait for it to solidify. Ceramic corner for the bathroom is covered with glue and fastens to the place of contact. The final stage of the work is the processing of the remaining slots.

For lack of opportunity or money for the purchase of such an essential accessory as the ceramic corner for the bathroom, you can make it yourself from the remnants of the tile. It is cut into straight strips in the required amount, processed edges, and then fastened to the junction between the wall and the bathroom in the first way. The only difference is that this version will require a very careful processing of the joints.

If you could not find a suitable ceramic tile for the tile, the white color of the curb for the bathroom will be the most optimal - most bowls have exactly this color.

Having spent very little time, money and energy, you can give the bathroom a complete and neat appearance. Corner of ceramics will serve faithfully for a long time, reliably protecting the space under the bathroom from the harmful impact of moisture.